IRFN5210 MECHANICAL DATA Dimensions in mm (inches) P–CHANNEL POWER MOSFET 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 ) VDSS ID(cont) RDS(on) 3 .6 0 (0 .1 4 2 ) M a x . 3 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 1 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) 0 .7 6 (0 .0 3 0 ) m in . 0 .8 9 (0 .0 3 5 ) m in . 3 .7 0 (0 .1 4 6 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .4 1 (0 .1 3 4 ) 2 -100V -31A Ω 0.060Ω FEATURES • HERMETICALLY SEALED SURFACE MOUNT PACKAGE • SMALL FOOTPRINT – EFFICIENT USE OF PCB SPACE. 9 .6 9 .3 1 1 .5 1 1 .2 7 (0 8 (0 8 (0 8 (0 .3 8 .3 6 .4 5 .4 4 1 ) 9 ) 6 ) 4 ) 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) • SIMPLE DRIVE REQUIREMENTS • LIGHTWEIGHT • HIGH PACKING DENSITIES SMD 1 PACKAGE (TO-276AB) Pad 1 – Source Pad 2 – Drain Pad 3 – Gate Note: IRF5210SMD also available with pins 1 and 3 reversed. ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VGS Gate – Source Voltage ID Continuous Drain Current (VGS = 0 , Tcase = 25°C) -31A ID Continuous Drain Current (VGS = 0 , Tcase = 100°C) -19A IDM Pulsed Drain Current 1 -124A PD Power Dissipation @ Tcase = 25°C 125W ±20V Linear Derating Factor 1.0W/°C EAS Single Pulse Avalanche Energy 2 340mJ dv/dt Peak Diode Recovery 3 4.0V/ns TJ , Tstg Operating and Storage Temperature Range TL Package Mounting Surface Temperature (for 5 sec) RθJC Thermal Resistance Junction to Case –55 to 150°C 300°C 1.0°C/W Notes 1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2% 2) @ VDD = -25V , L = 1.9mH , Peak IAS = -19A , VGS = -10V, RG = 25Ω, Starting TJ = 25°C 3) @ ISD ≤ -19A , di/dt ≤ -390A/μs , VDD ≤ -100V , TJ ≤ 150°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5587 Issue 1 IRFN5210 ELECTRICAL CHARACTERISTICS (Tamb = 25°C unless otherwise stated) Parameter BVDSS Test Conditions STATIC ELECTRICAL RATINGS Drain – Source Breakdown Voltage ΔBVDSS Temperature Coefficient of ΔTJ RDS(on) VGS = 0 ID = -250μA Min. Resistance 1 VGS(th) Gate Threshold Voltage 1 V / °C 0.06 Ω -4.0 V (Ω) S(Ω VGS = -10V ID = -19A VDS = VGS ID = -250μA -2.0 VDS = -50V IDS = -19A 10 VGS = 0 VDS = -80V -25 TJ = 125°C -250 gfs Forward Transconductance IDSS Zero Gate Voltage Drain Current IGSS Forward Gate – Source Leakage VGS = -20V -100 IGSS Reverse Gate – Source Leakage VGS = 20V 100 Ciss DYNAMIC CHARACTERISTICS Input Capacitance VGS = 0 2700 Coss Output Capacitance VDS = -25V 830 Crss Reverse Transfer Capacitance f = 1MHz 470 Qg Total Gate Charge 1 Qgs Gate – Source Charge 1 VGS = -10V ID = -19A VGS = -10V Qgd Gate – Drain (“Miller”) Charge td(on) Turn–On Delay Time tr Rise Time td(off) Turn–Off Delay Time tf Fall Time IS SOURCE – DRAIN DIODE CHARACTERISTICS Continuous Source Current ID = -19A 30 VDS = -80V VDD = -50V 115 nA nC nC 28 VGS = -10V 150 ID = -19A 103 RG = 2.5Ω ns 116 -31 2 ISM Pulse Source Current VSD Diode Forward Voltage trr Reverse Recovery Time IF = -19A Qrr Reverse Recovery Charge di / dt ≤ 100A/μs VDD ≤ -50V ton Forward Turn–On Time -124 IS = -19A μA pF 215 VDS = -80V 1 Unit V -0.11 ID = -1mA Static Drain – Source On–State Max. -100 Reference to 25°C Breakdown Voltage Typ. TJ = 25°C VGS = 0 TJ = 25°C A -1.6 V 290 ns 2.1 μC Negligible Notes 1) Pulse Test: Pulse Width ≤ 300ms, δ ≤ 2% 2) Repetitive Rating – Pulse width limited by maximum junction temperature. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: [email protected] Website: http://www.semelab.co.uk Document Number 5587 Issue 1