FR101S THRU FR107S FAST RECOVERY RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 1.0 Ampere Features • High Current Capability • Fast switching for high efficiency • Exceeds Environmental Standards of MIL-S-19500/228 • 1 ampere operation at TA = 55oC with no thermal runaway • Low Leakage. Mechanical Data • Case: Molded plastic, A-405 • Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed. • Polarity: Color band denotes cathode end • Mounting Position: Any Absolute Maximum Ratings and Characteristics Ratings at 25℃ ambient temperature unless otherwise specified, single phase, half wave, 60Hz, resistive or inductive load, for capacitive load, derate current by 20%. Symbols FR FR FR FR FR FR FR 101S 102S 103S 104S 105S 106S 107S Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Average forward rectified current .375” (9.5mm) lead length at TA = 55 OC I(AV) 1 Amp IFSM 30 Amps VF 1.3 Volts Peak forward surge current 8.3mS single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 1A DC and 25oC Maximum reverse current TA = 25℃ at rated DC blocking voltage TA = 100℃ 5 IR µA 500 Maximum reverse recovery time (Note 1) Trr Typical junction capacitance (Note 2) CJ 150 12 250 500 nS pF Typical thermal resistance (Note3) RΘJA 67 ℃/W Operating and storage temperature range TJ ,TS -55 to +150 ℃ 1) Reverse recovery test conditions: IF = 0.5A, IR = 1A, Irr = 0.25A. 2) Measured at 1MHZ and applied reverse voltage of 4 VDC . 3) Thermal resistance junction to ambient and form junction to lead at 0.375” (9.5mm) lead length P.C.B. mounted. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 23/08/2004