P600A THRU P600M PLASTIC SILICON RECTIFIERS Reverse Voltage - 50 to 1000 V Forward Current - 6 A Features • Low forward voltage • High current capability • High reliability • High forward surge current capability Mechanical Data • Case: Molded plastic, R-6 • Epoxy: UL 94V-0 rate flame retardant • Lead: Axial leads, solderable per MIL-STD -202, method 208 guaranteed • Polarity: Color band denotes cathode • Mounting Position: Any Maximum Ratings and Electrical Characteristics Ratings at 25 OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Parameter Symbols P600A P600B P600D P600G P600J P600K P600M Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at 0.375" (9.5 mm) Lead Length, TA = 60 OC Peak Forward Surge Current 8.3 ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IF(AV) 6 A IFSM 400 A VF 1 V IR 5 1000 µA CJ 150 RθJA 10 TJ ,TS - 55 to + 150 Maximum Forward Voltage at 6 A Maximum Reverse Current at Rated DC Blocking Voltage at TA = 25 C at TA = 100 OC O Typical Junction Capacitance 1) Typical Thermal Resistance 2) Operating and Storage Temperature Range pF C/W O C O 1) Measured at 1 MHz and applied reverse voltage of 4 V D.C. 2) Thermal resistance from junction to ambient at 0.375" (9.5 mm) lead length P.C.B. Mounted with 1.1 X 1.1 (30 X 30 mm) copper pads. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated :21/03/2008 H P600A THRU P600M SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated :21/03/2008 H