RL1601 THRU RL1607 GLASS PASSIVATED SILICON RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 16.0 Amperes Features • Low forward voltage drop • High current capability • High capability • High surge current capability Mechanical Data • Case: Molded plastic, TO-220A • Terminals: leads solderable per • MIL-STD-202, method 208 guaranteed • Polarity: As marked • Mounting Position: Any PIN 1 PIN 1 CASE PIN 2 CASE POSITIVE CASE PIN 2 CASE NEGATIVE SUFFIX "R" Absolute Maximum Ratings and Characteristics Dimensions in mm o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL RL RL RL RL RL RL 1601 1602 1603 1604 1605 1606 1607 Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward Rectified current O 0.375”(9.5mm) Lead Length at TC = 100 C I(AV) 16.0 Amps IFSM 250 Amps VF 1.1 Volts CJ 100 pF R0JC 2.0 ℃/W 10 µAmps IR 250 µAmps TJ ,Ts -55 to +150 Peak forward surge current 8.3ms single half -sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 16.0A DC and 25℃ Typical junction Capacitance (Note1) Typical thermal resistance (Note2) Maximum reverse current at rated DC blocking voltage @TC = 25OC @TC =125 OC Operating and storage temperature range O Notes :1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal resistance from junction to case mounted on heatsink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/12/2003 C FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 18 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 300 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT.(A) RL1601 THRU RL1607 16 14 Single Phase Half Wave 60Hz Resistive or Inductive Load 12 10 250 200 8.3ms Single Half Sine Wave JEDEC Method 150 100 50 0 1 8 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz 50 0 100 150 CASE TEMPERATURE.(°C) FIG.4- TYPICAL REVERSE CHARACTERISTICS A) 100 400 200 INSTANTANEOUS REVERSE CURRENT. ( INSTANTANEOUS FORWARD CURRENT. (A) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 40 Tj =25°C Pulse Width=300 s 1% Duty Cycle 20 10 4 2 1 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 40 10 Tj =125°C 4 2 1.0 Tj =25°C 0.4 0.2 0.1 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (V) FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE. (pF) 120 100 80 60 Tj=25°C 40 20 0 1 5 10 50 100 500 1000 REVERSE VOLTAGE. (V) SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 12/12/2003