RL1601CT THRU RL1607CT GLASS PASSIVATED SILICON RECTIFIERS Reverse Voltage – 50 to 1000 Volts Forward Current – 16.0 Amperes Features • Low forward voltage drop • High current capability • High capability • High surge current capability Mechanical Data • Case: Molded plastic, TO-220 • Terminals: leads solderable per • MIL-STD-202, method 208 guaranteed • Polarity: As marked • Mounting Position: Any PIN 1 CASE PIN 2 PIN 3 POSITIVE CT PIN 1 PIN 1 PIN 3 CASE PIN 3 PIN 2 CASE PIN 2 DOUBLER SUFFIX "D" NEGATIVE CT SUFFIX "A" Dimensions in mm Absolute Maximum Ratings and Characteristics o Ratings at 25 C ambient temperature unless otherwise specified. Single phase, half wave,60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RL RL RL RL RL RL RL 1601CT 1602CT 1603CT 1604CT 1605CT 1606CT 1607CT Units Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 Volts Maximum average forward Rectified current O 0.375”(9.5mm) Lead Length at TC = 100 C I(AV) 16.0 Amps IFSM 150 Amps VF 1.1 Volts CJ 50 pF R0JC 3.0 ℃/W 10 µAmps IR 250 µAmps TJ ,Ts -55 to +150 Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum forward voltage at 8.0A DC and 25℃ Typical junction Capacitance (Note1) Typical thermal resistance (Note2) Maximum reverse current at rated DC blocking voltage @TC = 25OC @TC =125 OC Operating and storage temperature range O Notes :1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC. 2. Thermal resistance from junction to case per leg mounted on heatsink. SEMTECH ELECTRONICS LTD. ® (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 18/12/2003 C FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE 18 FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PERLEG 175 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT.(A) RL1601CT THRU RL1607CT 16 14 Single phase half wave 60Hz resistive or inductive load 12 10 8 150 125 100 75 50 25 0 0 50 100 150 CASE TEMPERATURE.(°C) 1 A) 400 INSTANTANEOUS REVERSE CURRENT. ( 200 100 40 20 10 4 2 1 Tj =25°C Pulse Width=300 s 1% Duty Cycle 0.4 0.2 0.1 0.6 0.8 1.0 1.2 1.6 1.4 2 5 10 20 50 1.8 2.0 FORWARD VOLTAGE (V) 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PERLEG 40 10 Tj =125°C 4 2 1.0 Tj =25°C 0.4 0.2 0.1 0 20 40 60 80 100 120 JUNCTION CAPACITANCE. (pF) 120 100 80 60 f=10MHz Vsig=50mVp-p 20 0 Tj =25°C 0.1 0.4 1.0 4 10 40 100 400 1000 REVERSE VOLTAGE. (V) SEMTECH ELECTRONICS LTD. ® 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.5- TYPICAL JUNCTION CAPACITANCE PERLEG 40 100 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PERLEG INSTANTANEOUS FORWARD CURRENT. (A) 8.3ms Single Half Sine Wave JEDEC Method (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) Dated : 18/12/2003