KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media FEATURES · 0...-1 to 0...400 bar 0...-15 to 0...6000 psi gage1 or absolute · For many industrial gases and liquids · 0...10 V, 0.5...4.5 V, 0...5 V and 4...20 mA output · Field interchangeable · For industrial use MEDIA COMPATIBILITY Wetted materials: stainless steel 1.4404 (316L), ceramic Al2O3, NBR9, TPE9 Housing: stainless steel, protection class IP 65 (according to DIN EN 60529) respectively NEMA 4X1 SPECIFICATIONS11,12 ELECTRICAL CONNECTION Maximum ratings 0...10 V, 0.5...4.5 V, 0...5 V output Supply voltage (reverse polarity protection) KTx6...0 12...30 V KTx6...6, KTx6...7 9...30 V KTx6...42 9...30 V Maximum load current (source) KTx6...0, KTx6...6, KTx6...7 +Vs sensor 3 -Vs 1 mA 2 Temperature limits Storage Operating Compensated Humidity limits Vibration (5 to 500 Hz) Mechanical shock Proof pressure3 400 bar (6000 psi) all others December 2008 / 550 -55 to 100°C -40 to 100°C 0 to 70°C 4...20 mA output 0 - 95 %RH 10 gRMS 50 g 12 (9) to 30 V 1 Vout sensor +Vs 1 N/C 3 -Vs 2 V GND 9 to 30 V V RL GND 1.5 x rated pressure 2 x rated pressure 1/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media COMMON PERFORMANCE CHARACTERISTICS VS = 15 V, RL > 100 kΩ, tamb = 25°C Characteristics Operating pressure Thermal effects (0 to 70°C)4 Thermal effects (-40 to 0°C, 70 to 100°C) Non-linearity, hysteresis (BSL) and repeatability5 Min. KTE6001... KTE6N01G... KTE6P01G... KTE6002... KTE6005... KTE6010... KTE6016... KTE6020... KTE6025... KTE6035... KTE6050... KTE6070... KTE6100... KTE6150... KTE6200... KTE6300... KTE6400... KTU6015... KTU6N15G... KTU6P15G... KTU6030... KTU6050... KTU6100... KTU6200... KTU6300... KTU6500... KTU61K0... KTU61K5... KTU62K0... KTU63K0... KTU64K5... KTU66K0... Offset Span Offset Span > 200 bar (3000 psi) all others Typ. 0 -1 -1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 -15 -15 0 0 0 0 0 0 0 0 0 0 0 0 0.02 0.02 0.03 0.03 ±0.2 ±0.1 Long term stability6 ±0.3 Output noise (0 < f < 1 kHz) ±0.04 Response time (10 to 90 %) 1 Power supply rejection Offset Span December 2008 / 550 KTx6...0, ...6, ...7 KTx6...4 KTx6...0, ...6, ...7 KTx6...4 0.002 0.05 0.002 0.08 Max. 1 1 0 2 5 10 16 20 25 35 50 70 100 150 200 300 400 15 15 0 30 50 100 200 300 500 1000 1500 2000 3000 4500 6000 0.05 0.05 Unit bar p si %FSO/°C ±0.4 ±0.3 %FSO 5 ms %FSO/V 2/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media INDIVIDUAL PERFORMANCE CHARACTERISTICS 0...10 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Min. Typ. Max. Zero pressure offset KTx6N... all others 4.9 5 0.03 5.1 0.1 Full scale span7 KTx6N... all others 4.9 9.9 5 10 5.1 10.1 Unit V 25 Ω 3 5 mA Min. Typ. Max. Unit 2.450 0.450 1.950 3.950 2.5 0.5 2 4 2.550 0.550 2.050 4.050 V 25 Ω 3 5 mA Min. Typ. Max. Unit 2.45 2.5 0.03 2.5 5.0 2.55 0.08 2.55 5.05 V 25 Ω 3 5 mA Min. Typ. Max. Unit 11.9 3.9 7.9 15.9 12.0 4.0 8.0 16.0 12.1 4.1 8.1 16.1 mA Output impedance Current consumption (no load) 0.5...4.5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 KTx6N... all others KTx6N... all others Output impedance Current consumption (no load) 0...5 V output (VS = 15 V, RL > 100 kΩ, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 KTx6N... all others KTx6N... all others 2.45 4.95 Output impedance Current consumption (no load) 4...20 mA output (VS = 15 V, RL = 100 Ω, tamb = 25°C) Characteristics Zero pressure offset Full scale span7 Power consumption (IL = 20 mA) December 2008 / 550 KTx6N... all others KTx6N... all others 250 mW 3/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media OUTPUT CHARACTERISTICS 0...10 V output version 0.5...4.5 V output version 10 10 Vout V 9 8 Vout 9 V 8 7 7 KTx6N... 6 6 5 5 KTx6P... 4 KTx6N... 4 all other 3 KTx6P... 3 all other 2 2 1 1 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure 0...5 V output version 4...20 mA output version 10 20 Vout V 9 8 Iout 18 mA 16 7 14 6 12 KTx6P... 5 KTx6N... 10 KTx6N... KTx6P... 4 3 8 all other 6 all other 2 4 1 2 -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure -100 -80 -60 -40 -20 0 +20 +40 +60 +80+100 % operating pressure LOAD LIMITATION RECOMMENDED ACCESSORY 4...20 mA output version Plug DIN EN 175301-803 A and profile washer included in delivery. For a complete connector/cable assembly use order no. ZK000110-x (x=cable lenghts in m). 1400 Ohm 1200 50 1000 800 34 op e ra ratin ng g e 600 400 Profile washer M3 200 31 0 5 9 December 2008 / 550 16 20 25 30 V supply voltage dimensions in mm Note: For proper function of all gage devices the gage port must be vented to the atmosphere through the connector/cable assembly. 4/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media OUTLINE DRAWING KTE6...T 23 (0.90) NOM 68 (2.68) 17 (0.67) 4.5 (0.18) 8.5 (0.33) 12 (0.47) vent hole 27.0 (1.06) diam. 6.0 HEX 27 (1.06) G1/2" (1/2" BSP) 3 1 2 KTE6...Q 12 (0.47) 4.5 (0.18) NOM 68 (2.86) 12 (0.47) vent hole 3 27.0 (1.06) diam. G1/4" (1/4" BSP) HEX 27 (1.06) 8.5 (0.33) 1 2 KTE6...L 17 (0.67) 4.5 (0.18) NOM 68 (2.68) 27.0 (1.06) diam. 3 1/4"NPT HEX 27 (1.06) 8.5 (0.33) vent hole 12 (0.47) 1 2 KTE6...O (flush mount) 13 (0.51) 12 (0.47) NOM 68 (2.68) 8.5 (0.33) vent hole 12 (0.47) mass: 210 g December 2008 / 550 27.0 (1.06) diam. G3/4" Hex 32 (1.26) 3 2 1 dimensions in mm (inches) 5/6 www.sensortechnics.com KTE6000 / KTU6000 Series OEM pressure transmitters for industrial media ELECTROMAGNETIC CAPABILITY8 Test conditions EN61000-4-3: Grade 3, 10 V/m, 80 to 1000 MHz 80 % AMC (1 kHz) Electrical fast transient / burst immunity (EFT) EN61000-4-4: Grade 3, ±2 kV Radiated, radio frequency electromagnetic field immunity (RFI) Criterion Interference A <1 %FSO B <1 %FSO Electrostatic discharge immunity test (ESD) EN61000-4-2: Grade 4, ±8 kV, contact discharge B <1 %FSO Immunity to conducted disturbances induced by radio-frequency fields EN61000-4-6: Grade 3, 0.15 to 80 MHz 10 V, 80 % AMC (1 kHz) A <1 %FSO Specification notes: IP 65 protection is given when the connector is locked with a rubber washer. For proper function the gage port is vented to the atmosphere through the connector/cable assembly. Thus the cable end must have access to the ambient pressure. 2. The minimum supply voltage is directly proportional to the load resistance seen by the transmitter. For more details see the load limitation diagram. 3. Proof pressure is the maximum pressure which may be applied without causing damage to the sensing element. 4. Thermal effects tested and guaranteed from 0 to 70°C relative to 25°C. All specifications shown are relative to 25°C. 5. Non-linearity refers to the Best Straight Line fit measured for offset, full scale span and 1/2 full scale span. 6. Long term stability is the change in output after one year or 1 million pressure cycles. 7. Span is the arithmetic difference in transmitter output signal measured at zero pressure and the maximum operating pressure. 8. Test are in accordance with EN61000-6-2, April 1999. 9. Other sealing materials on special request. 10. Other fittings on special request. 11. CE-labelling is in accordance with 89/336/EEC. 12. The pressure transmitters must not be used as safety accessories according to article 1, 2.1.3 of the directive 97/23/EC. 1. ORDERING INFORMATION KTx6 x x x Output signal E: bar calibration U: psi calibration KTE6000 series 001: 0 to 1 bar N01: -1 to +1 bar P01: -1 to 0 bar 002: 0 to 2 bar 005: 0 to 5 bar 010: 0 to 10 bar 016: 0 to 16 bar 020: 0 to 20 bar 025: 0 to 25 bar 035: 0 to 35 bar 050: 0 to 50 bar 070: 0 to 70 bar 100: 0 to 100 bar 150: 0 to 150 bar 200: 0 to 200 bar 300: 0 to 300 bar 400: 0 to 400 bar Note: xxx KTU6000 series 015: 0 to 15 psi N15: -15 to +15 psi P15: -15 to 0 psi 030: 0 to 30 psi 050: 0 to 50 psi 100: 0 to 100 psi 200: 0 to 200 psi 300: 0 to 300 psi 500: 0 to 500 psi 1K0: 0 to 1000 psi 1K5: 0 to 1500 psi 2K0: 0 to 2000 psi 3K0: 0 to 3000 psi 4K5: 0 to 4500 psi 6K0: 0 to 6000 psi 0: 4: 6: 7: 0...10 V 4...20 mA 0.5...4.5 V 0...5 V Fitting size10 L: O: Q: T: 1/4" NPT male G 3/4" (3/4"BSP) only up to 16 bar/200 psi G 1/4" (1/4" BSP) male G 1/2" (1/2" BSP) Pressure mode G: S: A: gage pressure 1 (up to 50 bar/750 psi) sealed gage (above 50 bar/750 psi absolute pressure (up to 50 bar/750 psi) Other pressure ranges and options are widely available. Please contact your nearest Sensortechnics sales representative. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. December 2008 / 550 6/6 www.sensortechnics.com