V2 Valve Value squared switching solenoid valve FEATURES · 2-way or 3-way, 2 position valve (NO, NC & Distributor) · Meets performance characteristics for a minimum of 25 million cycles · Cost-effective, unique PBT body · Manifold mount design or molded barbed fittings to fit a range of needs PHYSICAL PROPERTIES MEDIA COMPATIBILITY Non-corrosive gases Operating environment Storage temperature 0 to 70 °C -40 to 70 °C WETTED MATERIALS Length 43.9 mm (1.73 in) Width 15.9 mm (0.625 in) Stem base: 360 HO2 brass Height 17 mm (0.67 in) All others: FKM; 430 FR series stainless steel (passivated); 302 series stainless steel; Loctite® 290 Porting Barb fittings for 1/8 in I.D. tubing or manifold mount Weight 34 g (1.2 oz) Body: PBT (Polybutylene Terephthalate) ELECTRICAL Power Voltage 0.016 cm3 (nominal) Internal volume 0.5, 1.0 or 2.0 W 5, 12, 24 VDC ± 10% Filtration (recommended) Lubrication 40 µm None required Loctite® is a registered trademark of Henkel Consumer Adhesives, Inc. October 2006 / 252 1/4 www.sensortechnics.com V2 Valve Value squared switching solenoid valve PERFORMANCE CHARACTERISTICS Part no. Pressure V210... 0...100 psig V213... 0...50 psig V214... 0...30 psig V217... 0...15 psig V220... 0...6 psig Vacuum Orifice siz es/ Equivalent CV1 Leak rate2 <30 msec cycling (2 Watt) 0.030" (0.762 mm)/ 0.017 CV 0...27 "Hg (0...13 psi) R esp o n se ≤0.2 sccm <30 msec cycling (2 Watt) 0.050" (1.270 mm)/ 0.035 CV FLOW CURVES (typical air flow)3 Notes: 1 The CV value is the volume flow in US gallons/min under specific flow conditions and describes the relative flow capacity of a valve. If several valves with the same nominal diameter are compared, the valve with the highest CV value has the best flow dynamics design. The equivalent european measure is the kV value expressed in m3/h (kV = 0.86 CV). 2 sccm denotes Standard Cubic Centimeters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1000 sccm = 1 slpm. 3 slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. 1 slpm = 1000 sccm. October 2006 / 252 2/4 www.sensortechnics.com V2 Valve Value squared switching solenoid valve VALVE TYPE Type 1 Type 3 Type 4 October 2006 / 252 3/4 www.sensortechnics.com V2 Valve Value squared switching solenoid valve COIL STYLES V2...P... (PC mount, 4 PC pins) V2...F... (Wire leads, no terminals) V2...8... (1/8" I.D. tubing) V2...0... (Manifold mount) BODY STYLES STEM BARB STYLES V2...0 (Type 1 top seat, plugged) V2...8 (0.125" top seat, 1/8" I.D. tubing) ORDERING INFORMATION Model no. Series Options V2 Max. pressure Orifice size 10: 0...100 psi 0.030" Material C oi l wattage Type 2W 1: 2-way NC 1W 2W 3: 3-way NC or distributor 1W 4: 3-way NO B ody PV: PBT Plunger & se a l FK M 5: (0.762 mm) 13: 0...50 psi 0.030" (0.762 mm) 14: 0...30 psi 0.050" 0...15 psi 0.050" B ody styles Topseat barbs 5 V DC P: PC mount, 4 PC pins 0: manifold 0: none (manifold mount) F: Wire leads, 18" 8: 1/8" barbs 8: 1/8" barbs 12: 12 V D C 24: 24 V D C (1.270 mm) 17: Coil type Voltage (1.270 mm) 20: 0...6 psi 0.050" 0.5 W (1.270 mm) Example: V2 14 3 PV 12 P 8 8 Note: Not all combinations might be available. Please contact your nearest Sensortechnics sales representative for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. October 2006 / 252 4/4 www.sensortechnics.com