Z-Power LED X10490 Technical Data Sheet Specification AWT803-S SSC Drawn Approval CUSTOMER Approval Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Contents 1. Description 2. Absolute Maximum Ratings 3. Electro-Optical Characteristics 4. Characteristic Graph 5. Reliability Test Item and Condition 6. Color & Binning 7. Outline Dimension 8. Packing 9. Soldering 10. Precaution for use 11. Handling of Silicone Resin LEDs Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet AWT803-S 1. Description This surface-mount LED comes in PLCC standard package dimension. It has a substrate made up of a molded plastic reflector sitting on top of a bent lead frame. The die is attached within the reflector cavity and the cavity is encapsulated by epoxy or silicone. The package design coupled with careful selection of component materials allow these products to perform with high reliability in a larger temperature range -40℃ to 100℃. The high reliability feature is crucial to Automotive interior and Indoor ESS. Features • White colored SMT package • InGaN/Sic material • Suitable for all SMT assembly and soldering methods • Pb-Free Reflow soldering application • RoHS compliant Applications • White Back-light • Electric Signs and Signals • Interior automotive • Office Automation, Electrical Appliances, Industrial Equipment Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 2. Absolute maximum ratings*1 Parameter Symbol Value Unit Power Dissipation Pd 111 mW Forward Current IF 30 mA 90 mA Peak Forward Current IFM *2 Reverse Voltage VR 5 V Operating Temperature Topr -40 ~ +100 ºC Storage Temperature Tstg -40 ~ +100 ºC *1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW ≤ 1msec of pulse width and D ≤ 1/10 of duty ratio. 3. Electro-Optical characteristics Parameter Symbol Condition Min Typ Max Unit Forward Voltage VF IF =20mA 2.7 3.3 3.7 V Reverse Current IR VR=5V - - 10 µA Luminous Intensity*1 IV IF =20mA 1,100 1,500 2,100 mcd IF =20mA - 115 - deg. 1.5kΩ ; 100pF 1 - - KV Viewing Angle *2 ESD ( HBM ) 2θ ½ *1. The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is ±10% *2. 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity. [Note] All measurements were made under the standardized environment of SSC. Rev. 01 April 2008 www.ZLED.com Relative Luminous Intensity vs Forward Current Forward Current vs. Forward Voltage (Ta=25 OC ) (Ta=25 OC ) 2.0 Relative Luminous Intensity [%] Forward Current IF [mA] 1.8 1 10 0 10 2.6 2.8 3.0 3.2 3.4 3.6 3.8 4.0 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 4.2 0 10 Forward Voltage VF (V) 20 30 40 Forward Current IF [mA] Forward Current Derating Curve Radiation Diagram 40 0 Forward Current IF [mA] Z-Power LED X10490 Technical Data Sheet 4. Characteristic Graph -30 30 30 -60 20 60 10 90 -90 0 -40 -20 0 20 40 60 80 100 120 Ambient Temperature TA [OC] Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 5 Reliability Item Reference Test Condition Duration / Cycle Number of Damage Thermal Shock Internal Reference Ta =-40oC (30MIN) ~ 100oC (30MIN) 100 Cycle 0/22 Temperature Cycle EIAJ ED-4701 Ta =-40oC (30MIN) ~ 25oC (5MIN) ~ 100oC (30MIN) ~ 25oC (5MIN) 100 Cycle 0/22 High Temperature Storage EIAJ ED-4701 Ta =100oC 1000 Hours 0/22 High Temperature High Humidity Storage EIAJ ED-4701 Ta =85oC, RH=85% 1000 Hours 0/22 Low Temperature Storage EIAJ ED-4701 Ta =-40oC 1000 Hours 0/22 Operating Endurance Test Internal Reference Ta =25oC, IF =30mA 1000 Hours 0/22 High Temperature High Humidity Life Test Internal Reference Ta =85oC, RH=85%, IF =15mA 1000 Hours 0/22 High Temperature Life Test Internal Reference Ta =100oC, IF =5mA 1000 Hours 0/22 Low Temperature Life Test Internal Reference Ta =-40oC, IF =30mA 1000 Hours 0/22 ESD(HBM) MIL-STD883D 1KV at 1.5kΩ; 100pF 3 Time 0/22 Criteria for Judging the Damage Item Symbol Forward Voltage VF Reverse Current Luminous Intensity Condition Criteria for Judgement MIN MAX IF =20mA - USL*1 × 1.2 IR VR=5V - USL*1 × 2.0 IV IF =20mA LSL*2 × 0.5 - Note : *1 USL : Upper Standard Level *2 LSL : Lower Standard Level Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 6. Color & Binning 0.9 515 0.8 520 525 530 510 535 0.7 540 545 550 555 505 560 0.6 565 570 575 580 585 590 595 600 CIE (y) 500 0.5 0.4 0.3 0.2 0.1 0.0 0.0 495 610 620 630 830 490 485 480 475 470 460 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 CI E(x) Rev. 01 April 2008 www.ZLED.com 2700K 0.44 3000K T1 S1 4500K RA WA VA TA SA R0 0.36 T0 S0 R1 0.38 W0 V0 4000K 0.40 W1 V1 3500K 0.42 Y Z-Power LED X10490 Technical Data Sheet 0.46 WB VB TB 2500K 2900K 3200K SB 3700K RB 4200K 0.34 4700K 0.34 0.36 0.38 0.40 0.42 0.44 X ● COLOR RANK 0.46 0.48 0.50 <IF=20mA, Ta=25℃> 4500K RB X 0.3515 0.3500 0.3649 0.3676 RA Y 0.3487 0.3400 0.3482 0.3600 X 0.3531 0.3515 0.3676 0.3704 R0 Y 0.3605 0.3487 0.3600 0.3725 X 0.3546 0.3531 0.3704 0.3733 R1 Y 0.3717 0.3605 0.3725 0.3855 X 0.3562 0.3546 0.3733 0.3760 Y 0.3855 0.3725 0.3881 0.4020 X 0.376 0.3733 0.3997 0.4044 Y 0.3983 0.3843 0.3991 0.4127 X 0.4037 0.3985 0.4283 0.4356 Y 0.4127 0.3991 0.4058 0.4220 X 0.4356 0.4283 0.4541 0.4617 Y 0.422 0.4058 0.4150 0.4300 X 0.4617 0.4541 0.4867 0.4970 Y 0.3826 0.3717 0.3855 0.3974 4000K SB X 0.3676 0.3649 0.3866 0.3910 SA Y 0.3600 0.3482 0.3618 0.3750 X 0.3704 0.3676 0.3910 0.3952 S0 Y 0.3725 0.3600 0.3750 0.3881 X 0.3733 0.3704 0.3952 0.3997 S1 Y 0.3974 0.3855 0.4020 0.4160 3500K TB X 0.3898 0.3860 0.4106 0.4158 TA Y 0.3716 0.3600 0.372 0.3841 X 0.3940 0.3898 0.4158 0.4225 T0 Y 0.3843 0.3716 0.3841 0.3991 X 0.3985 0.3940 0.4225 0.4283 T1 Y 0.4140 0.3983 0.4127 0.4294 3000K VB X 0.4158 0.4106 0.4307 0.4381 VA Y 0.3841 0.3720 0.3768 0.3910 X 0.4225 0.4158 0.4381 0.4457 V0 Y 0.3991 0.3841 0.3910 0.4058 X 0.4283 0.4225 0.4457 0.4541 V1 Y 0.4294 0.4127 0.422 0.4371 2700K WB X 0.4381 0.4307 0.4588 0.4670 WA Y 0.3910 0.3768 0.3838 0.3979 X 0.4457 0.4381 0.4670 0.4780 W0 Y 0.4058 0.3910 0.3979 0.4150 X 0.4541 0.4457 0.4780 0.4867 * Measurement Uncertainty of the Color Coordinates : ± 0.01 W1 Y 0.4371 0.4220 0.4300 0.4466 Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet Bin Code Description Bin Code Luminous Intensity CIE Forward Voltage J3 w0 Z3 4,700K 4,700K ~ 3,200K Luminous Intensity (mcd) @ IF = 20mA Bin Code Min. Max. J2 1,200 1,500 J5 J8 1,500 1,800 1,800 2,100 Color Rank @ IF = 20mA RX SX TX * X : B, A, 0, 1 Forward Voltage (V) @ IF = 20mA Bin Code Min. Max. Y 2.7 3.0 Z1 3.0 3.1 Z2 3.1 3.2 Z3 3.2 3.3 A1 3.3 3.4 3,200K 3,200K ~ 2,500K Luminous Intensity (mcd) @ IF = 20mA Bin Code Min. Max. J1 1,100 1,300 J3 1,300 1,600 J6 1,600 1,900 Color Rank @ IF = 20mA VX WX * X : B, A, 0, 1 Forward Voltage (V) @ IF = 20mA Bin Code Min. Max. Y 2.7 3.0 Z1 3.0 3.1 Z2 3.1 3.2 Z3 3.2 3.3 A1 3.3 3.4 [Note] All measurements were made under the standardized environment of SSC. In order to ensure availability, single color rank will not be orderable. Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 7. Outline Dimension Recommended Solder Pattern ( Tolerance: ±0.2, Unit: mm ) 8. packing ( Tolerance: ±0.2, Unit: mm ) (1) Quantity : 3000pcs/Reel, 2000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10º to the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet ● Reel Packing Structure Reel QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. HUMIDITY INDICATOR DESI PAK Aluminum Vinyl Bag QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 102 or 142 1 SIDE c 1 QUANTITY : XXXX LOT NUMBER : XXXXXXXXXX RoHS PART NUMBER : SEOUL SEMICONDUCTOR CO., LTD. b a Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 9. soldering (1) Lead Solder Lead Solder Lead Solder 2.5~5 o C / sec. Pre-heat 120~150℃ Pre-heat time 120 sec. Max. Peak-Temperature 240℃ Max. Soldering time Condition 10 sec. Max. 2.5~5 C / sec. Pre-heating 120~150 oC 240 oC Max. 10 sec. Max. 60sec. Max. Above 200 oC 120sec. Max. (2) Lead-Free Solder Lead-frame Solder 1~5 o C / sec. Lead Free Solder Pre-heat 150~200℃ Pre-heat time 120 sec. Max. Peak-Temperature 260℃ Max. Soldering time Condition 10 sec. Max. 1~5 o C / sec. Pre-heating 150~200 o C 260 oC Max. 10 sec. Max. 60sec. Max. Above 220 oC 120sec. Max. (3) Hand Soldering conditions Do not exceed 4 seconds at maximum 315ºC under soldering iron. (4) The encapsulated material of the LEDs is silicone. Precautions should be taken to avoid the strong pressure on the encapsulated part. So when using the chip mounter, the picking up nozzle that does not affect the silicone resign should be used. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 10. precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desicator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 70%RH (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; Keeping of a fraction Temperature : 5 ~ 40ºC Humidity : less than 10% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (5) Quick cooling shall be avoided. (6) Components shall not be mounted on warped direction of PCB. (7) Anti radioactive ray design is not considered for the products. (8) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (9) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (10) The LEDs must be soldered within seven days after opening the moisture-proof packing. (11) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (12) The appearance and specifications of the product may be modified for improvement without notice. Rev. 01 April 2008 www.ZLED.com Z-Power LED X10490 Technical Data Sheet 11. Handling of Silicone Resin LEDs (1) During processing, mechanical stress on the surface should be minimized as much as possible. Sharp objects of all types should not be used to pierce the sealing compound. (2) In general, LEDs should only be handled from the side. By the way, this also applies to LEDs without a silicone sealant, since the surface can also become scratched. (3) When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevented. This is assured by choosing a pick and place nozzle which is larger than the LED’s reflector area. (4) Silicone differs from materials conventionally used for the manufacturing of LEDs. These conditions must be considered during the handling of such devices. Compared to standard encapsulants, silicone is generally softer, and the surface is more likely to attract dust. As mentioned previously, the increased sensitivity to dust requires special care during processing. In cases where a minimal level of dirt and dust particles cannot be guaranteed, a suitable cleaning solution must be applied to the surface after the soldering of components. (5) SSC suggests using isopropyl alcohol for cleaning. In case other solvents are used, it must be assured that these solvents do not dissolve the package or resin. Ultrasonic cleaning is not recommended. Ultrasonic cleaning may cause damage to the LED. Rev. 01 April 2008 www.ZLED.com