SEOUL W47180

Z-Power LED
X10490
Technical
Data
Sheet
W47180
W47180
Features
• Super high flux output
Z-Power series is designed for
사진
and high luminance
high current operation and
• Designed for high
current operation
high flux output applications.
• Low thermal resistance
• SMT solderability
Z-Power LED's thermal management
• Lead free product
perform exceeds other power LED solutions.
• RoHS compliant
It incorporates state of the art SMD design and Thermal
emission material.
Z Power LED is ideal light sources for general illumination
applications, custom designed solutions, automotive large
LCD backlights
Applications
• Mobile phone flash
• Automotive interior /
Exterior lighting
• Automotive signal lighting
• Automotive forward
lighting
• Torch
• Architectural lighting
• LCD TV / Monitor backlight
• Projector light source
• Traffic signals
• Task lighting
• Decorative / Pathway
lighting
• Remote / Solar powered
lighting
• Household appliances
*The appearance and specifications of the product may be changed
for improvement without notice.
Rev. 00
1
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Full Code of Z-Power LED Series
Full code form : X1 X2 X3 X4 X5 X6 – X7 X8 – X9 X10 X11 X12X13
1. Part Number
- X1 : Color
- X2 : Z-Power LED series number
- X3 : LENS type
- X4 : Chip quantity (or Power Dissipation)
- X5 : Package outline size
- X6 : Type of PCB
2. Internal Number
- X7
- X8
3. Code Labeling
- X9 : Luminous flux (or Radiant flux for royal blue)
- X10 X11 X12 : Dominant wavelength (or x,y coordinates rank code)
- X13 : Forward voltage
4. Sticker Diagram on Reel & Aluminum Vinyl Bag
PART NO. : X1 X2 X3 X4 X5 X6 – X7 X8
QUANTITY : ###
LOT NUMBER : ##########
BIN CODE : X10 X11 X12 X13 X14
For more information about binning and labeling, refer to the Application Note -1
Rev. 00
2
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Outline Dimension
1. Dome Type
SLUG
Cathode Mark
Lens
Body
Lead
Notes :
1. All dimensions are in millimeters. (tolerance : ±0.2 )
2. Scale : none
3. Slug of package is connected to anode.
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 00
3
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Characteristics for Z-Power LED
1. Pure White (W47180)
1-1 Electro-Optical characteristics at IF=350mA, TA=25ºC
Parameter
Luminous Flux
Symbol
[1]
Min
Typ
Max
Unit
T rank
ФV [2]
70
80
91
lm
U rank
[2]
91
100
-
lm
CCT
-
6300
-
K
Ra
-
70
-
-
VF
2.9
3.25
4
V
Correlated Color Temperature
ФV
[3]
CRI
Forward Voltage
Value
[4]
View Angle
2Θ ½
72
deg.
Thermal resistance
[5]
RθJ-B
8.5
ºC /W
Thermal resistance
[6]
RθJ-C
6.9
ºC /W
1-2 Absolute Maximum Ratings
Parameter
Symbol
Forward Current
IF
Power Dissipation
Pd
4
W
Junction Temperature
Tj
145(@ IF ≤ 700mA)
ºC
Operating Temperature
Topr
-40 ~ +85
ºC
Storage Temperature
Tstg
-40 ~ +100
ºC
-
±10,000V HBM
-
ESD Sensitivity
[8]
Value
1000 (@ Tj = 90 ºC)
Unit
[7]
1800 (@ 1KHz, 1/10 duty)
mA
*Notes :
[1] SSC maintains a tolerance of ±10% on flux and power measurements.
[2] ФV is the total luminous flux output as measured with an integrated sphere.
[3] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance.
[4] A tolerance of ±0.06V on forward voltage measurements
[5], [6] RθJ-B is measured with a SSC metal core pcb.(25 ºC ≤TJ ≤ 110 ºC)
RθJ-C is measured with only emitter. (25 ºC ≤TJ ≤ 110 ºC)
Break voltage of Metal PCB is 6.5kVAC.
[7] IF Max is guaranteed under the TJ ≤90 ºC.
[8] It is included the zener chip to protect the product from ESD.
--------------------------Caution-------------------------1. Please do not drive at rated current more than 5 sec. without proper heat sink.
Rev. 00
4
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1. Pure White
1 .0
S ta n d a r d e y e r e s p o n s e c u r v e
Distribution
0 .8
Relative Spectral Power
Z-Power LED
X10490
Technical
Data
Sheet
Color Spectrum, TA=25ºC
0 .6
0 .4
0 .2
0 .0
300
400
500
600
700
800
900
W a v e le n g th ( n m )
Rev. 00
5
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1. Relative Light Output vs. Junction Temperature at IF=350mA
120
Relative Light Output(%)
100
80
60
40
Pure White
20
0
25
50
75
100
125
150
O
Junction Temperature[ C]
2. Forward Voltage Shift vs. Junction Temperature at IF=350mA
0.0
Forward Voltage Shift[V]
Z-Power LED
X10490
Technical
Data
Sheet
Junction Temperature Characteristics
-0.2
-0.4
-0.6
Pure White
-0.8
-1.0
25
50
75
100
125
O
Junction Temperature[ C]
6
150
Rev. 00
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1. Forward Voltage vs. Forward Current , TA=25 ºc
Pure White
1000
Average Forward Current [mA]
Z-Power LED
X10490
Technical
Data
Sheet
Forward Current Characteristics
800
600
400
200
0
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Forward Voltage [V]
Rev. 00
7
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
2. Forward Current vs. Normalized Relative Luminous Flux, TA=25 ºc
2.5
Pure White
Relative Lumious Flux(a.U)
Z-Power LED
X10490
Technical
Data
Sheet
Forward Current Characteristics
2.0
1.5
1.0
0.5
0.0
0
200
400
600
800
1000
Forward Current [mA]
Rev. 00
8
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1-1. Pure White
(TJMAX = 145 ºC, @350mA)
400
350
Current [mA]
300
250
o
RjaT = 60 C/W
200
o
RjaT = 50 C/W
o
RjaT = 40 C/W
150
o
RjaT = 30 C/W
100
50
0
0
25
50
75
100
125
150
125
150
o
Ambient Temperature [ C]
1-2. Pure White
(TJMAX = 145 ºC, @700mA)
800
700
600
Current [mA]
Z-Power LED
X10490
Technical
Data
Sheet
Ambient Temperature vs Allowable Forward Current
500
o
RjaT = 35 C/W
400
o
RjaT = 30 C/W
o
RjaT = 25 C/W
300
o
RjaT = 20 C/W
200
100
0
0
25
50
75
100
o
Ambient Temperature [ C]
Rev. 00
9
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1-3. Pure White
(TJMAX = 90 ºC, @ 1000mA)
1200
1000
Current [mA]
Z-Power LED
X10490
Technical
Data
Sheet
Ambient Temperature vs Allowable Forward Current
800
o
RjaT = 25 C/W
600
o
RjaT = 20 C/W
400
200
0
0
25
50
75
100
125
150
o
Ambient Temperature [ C]
Rev. 00
10
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
1. Pure White
0
1.0
30
0.8
Relative luminous flux
Z-Power LED
X10490
Technical
Data
Sheet
Typical Dome Type Radiation pattern
0.6
60
0.4
0.2
0.0
-80
-60
-40
-20
0
90
Angle(deg.)
Rev. 00
11
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Recommended Solder pad
1. Solder pad
2. Solder paste pattern
Note :
1. All dimensions are in millimeters (tolerance : ±0.2 )
2. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 00
12
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Tm : Reflow machine setting temp (max 30 sec.)
Ts : Surface temp of PCB (max)
Ts : Surface temp of PCB (recommend)
Ts : Surface temp of PCB (min)
260
240
220
200
180
~
Z-Power LED
X10490
Technical
Data
Sheet
3. Reflow Soldering Conditions / Profile
Pre-heating
Cooling
-5 °C/sec
Rising
5 °C/sec
150
0
Time
[Hr]
4. Hand Soldering conditions
Lead : Not more than 3 seconds @MAX280℃
Slug : Use a thermal-adhesives
* Caution
1. Reflow soldering should not be done more than one time.
2. Repairing should not be done after the LEDs have been soldered.
When repairing is unavoidable, suitable tools have to be used.
3. Die slug is to be soldered.
4. When soldering, do not put stress on the LEDs during heating.
5. After soldering, do not warp the circuit board.
6. Recommend to use a convection type reflow machine with 7 ~ 8 zones.
Rev. 00
13
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Emitter Type Reel Packaging
7.00
Note :
1. The number of loaded products in the reel is 500ea
2. All dimensions are in millimeters (tolerance : ±0.2 )
3. Scale none
*The appearance and specifications of the product may be changed for improvement without
notice.
Rev. 00
14
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Packaging Structure
Aluminum Vinyl Bag
PART NO. : ######-##
QUANTITY : ***
LOT NUMBER : #######-#######
BIN CODE : #######
Outer Box
TYPE
c
SIZE(mm)
a
350
b
350
c
370
ZLED
PART : W47180-**
PO CODE : ##
Q'YT : ######
LOT NO : YMDD-#####
DATE : ######
ZLED
b
SEOUL SEMICONDUCTOR CO.,LTD
a
Note :
1. 6~10 reels are loaded in box
2. Scale none
3. For more information about binning and labeling, refer to the Application Note - 1
Rev. 00
15
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
precaution for use
• Storage
To avoid the moisture penetration, we recommend storing Z Power LEDs in a dry box
(or desiccator) with a desiccant . The recommended storage conditions are Temperature 5 to 30
degrees Centigrade. Humidity 50% maximum.
• Precaution after opening packaging
However LED is correspond SMD, when LED be soldered dip, interfacial separation may affect
the light transmission efficiency, causing the light intensity to drop.
Attention in followed.
a. Soldering should be done right after opening the package(within 24Hrs).
b. Keeping of a fraction
- Sealing
- Temperature : 5 ~ 40℃ Humidity : less than 30%
c. If the package has been opened more than 1week or the color of desiccant changes,
components should be dried for 10-12hr at 60±5℃
• Any mechanical force or any excess vibration shall not be accepted to apply during cooling
process to normal temp. after soldering.
• Please avoid rapid cooling after soldering.
• Components should not be mounted on warped direction of PCB.
• Anti radioactive ray design is not considered for the products listed here in.
• Gallium arsenide is used in some of the products listed in this publication. These products are
dangerous if they are burned or shredded in the process of disposal. It is also dangerous to
drink the liquid or inhale the gas generated by such products when chemically disposed.
• This device should not be used in any type of fluid such as water, oil, organic solvent and etc.
When washing is required, IPA(Isopropyl Alcohol) should be used.
• When the LEDs are illuminating, operating current should be decided after considering the
package maximum temperature.
• LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or
more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used
for storage.
• The appearance and specifications of the product may be modified for improvement without
notice.
• Long time exposure of sunlight or occasional UV exposure will cause lens discoloration.
• The slug is connected to the anode. Therefore, we recommend to isolate the heat sink.
• Attaching LEDs, don’t use adhesives to generate organic vapor.
16
Rev. 00
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)
Z-Power LED
X10490
Technical
Data
Sheet
Handling of Silicone resin LEDs
Z-Power LED is encapsulated by silicone resin for the highest flux efficiency.
Notes for handling of Silicone resin Z-Power LEDs
• Avoid touching silicone resin parts especially by sharp tools such as Pincette(Tweezers)
• Avoid leaving fingerprints on silicone resin parts.
• Dust sensitivity silicone resin need containers having cover for storage.
• When populating boards in SMT production, there are basically no restrictions
regarding the form of the pick and place nozzle, except that mechanical pressure on
the surface of the resin must be prevent.
• Please do not force over 2000 gf impact or pressure diagonally on the silicon lens.
It will cause fatal damage of this product
• Please do not recommend to cover the silicone resin of the LEDs with other resin
(epoxy, urethane, etc)
Rev. 00
17
May 2008
www.ZLED.com
서식번호 : SSC-QP-7-07-24 (Rev.00)