PR29MF11NSZ Series/PR39MF11NSZ Series PR29MF11NSZ Series/ PR39MF11NSZ Series 8-Pin DIP Type SSR for Low Power Control ■ Features ■ Outline Dimensions 1. Compact 8-pin dual-in-line package type 2. RMS ON-state current IT(rms):0.9A 3. Built-in zero-cross circuit (PR29MF21NSZ/PR39MF21NSZ) 4. High repetitive peak OFF-state voltage PR29MF11NSZ/PR29MF21NSZ VDRM:MIN. 400V PR39MF11NSZ/PR39MF21NSZ VDRM:MIN. 600V 5. Isolation voltage between input and output (Viso(rms):4kV) 6. Recognized by UL, file No. E94758 (PR29MF11NSZ/PR39MF11NSZ) 7. Approved by CSA No. LR63705 (PR29MF11NSZ/PR39MF11NSZ) 8. PR29MF21NSZ/PR39MF21NSZ:under preparation for UL and CSA 6 8 5 A 6.5±0.5 A Anode mark 2 4 1.2±0.3 7.62±0.3 3.25±0.5 2.9±0.5 9.66 3 ±0.5 (Model No.) R29MF1 R29MF2 R36MF1 R36MF2 0.5TYP. 3.5±0.5 1 0.5±0.1 0.26±0.1 θ θ:0 to 13˚ ❈Zero-cross circuit for (PR29MF21NSZ/PR39MF21NSZ) ■ Applications 1. Various types of home appliances Internal connection Diagram PR29MF11NSZ/ PR39MF11NSZ ■ Model Line-up For 100V line For 200V line No built-in zerocross circuit PR29MF11NSZ PR39MF11NSZ Built-in zerocross circuit PR29MF21NSZ PR39MF21NSZ ■ Absolute Maximum Ratings (Unit : mm) 2.54±0.25 8 (Ta=25°C) Unit mA V A A 5 8 6 5 ❈ Zero-cross circuit 1 Parameter Symbol Rating *1 50 Forward current IF Input Reverse voltage VR 6 *1 IT (rms) RMS ON-state current 0.9 Peak one cycle surge current 9 (50Hz sine wave) Isurge PR29MF11NSZ Output Repetitive 400 PR29MF21NSZ peak VDRM OFF-state PR39MF11NSZ 600 voltage PR39MF21NSZ *2 Viso (rms) Isolation voltage 4.0 PR29MF11NSZ −25 to +85 Operating PR39MF11NSZ Topr temperature PR29MF21NSZ −30 to +85 PR39MF21NSZ Storage temperature −40 to +125 Tstg Soldering temperature 260 (For 10s) Tsol 6 PR29MF21NSZ/ PR39MF21NSZ 2 3 4 1 1 2 3 4 Cathode Anode Cathode Cathode 2 5 6 8 3 4 G T1 T2 Terminal 1 , 3 and 4 are common ones of cathode.To radiate the heat, solder all of the lead pins on the pattern of PWB. V kV °C °C °C *1 The derating factors of absolute maximum ratings due to ambient temperature are shown in Fig.1, 2 *2 AC for 1 min, 40 to 60%RH, f=60Hz Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/ PR29MF11NSZ Series/PR39MF11NSZ Series ■ Electrical Characteristics Symbol Parameter VF Forward voltage Reverse current IR Repetitive peak OFF-state current IDRM ON-state voltage VT IH Holding current Critical rate of rise of OFF-state voltage dV/dt PR29MF21NSZ Zero-cross VOX voltage PR39MF21NSZ Minimum trigger current IFT Isolation resistance RISO PR29MF11NSZ/PR39MF11NSZ ton Turn-on time PR29MF21NSZ/PR39MF21NSZ Input Output Transfer characteristics Fig.1 RMS ON-state Current vs. Ambient Temperature (PR29MF11NSZ/PR39MF11NSZ) Conditions IF=20mA VR=3V VD=VDRM IT=0.9A VD=6V − VD=1/√2 • VDRM MIN. − − − − − 100 TYP. 1.2 − − − − − MAX. 1.4 10 100 3.0 25 − (Ta=25˚C) Unit V µA µA V mA V/µs IF=15mA, R load − − 35 V VD=6V, RL=100Ω DC=500V, 40 to 60%RH − 5×1010 − 1011 10 mA Ω VD=6V, RL=100Ω, IF=20mA − − RMS ON-state current IT (rms) (A) RMS ON-state current IT (rms) (A) 1 0.8 0.6 0.4 0.2 0.8 0.6 0.4 0.2 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 100 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) Fig.4 Forward Current vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) 70 70 60 60 Forward current IF (mA) Forward current IF (mA) Fig.3 Forward Current vs. Ambient Temperature (PR29MF11NSZ/PR39MF11NSZ) 50 40 30 20 10 0 −25 −20 −10 0 µs Fig.2 RMS ON-state Current vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) 1 0 −25−20 −10 0 − 100 50 50 40 30 20 10 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (˚C) 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 100 Ambient temperature Ta (˚C) PR29MF11NSZ Series/PR39MF11NSZ Series Fig.5 Forward Current vs. Forward Voltage Fig.6 Minimum Trigger Current vs. Ambient Temperature 200 12 Ta=75˚C 50˚C 50 Minimum trigger current IFT (mA) Forward current IF (mA) 100 0˚C 25˚C −25˚C 20 10 5 2 1 0 0.5 1 1.5 2 2.5 10 PR29MF11NSZ 8 6 PR39MF11NSZ 4 2 0 −40 3 Forward voltage VF (V) 20 40 60 80 100 1.4 IT=0.9A 1.3 5 ON-state voltage VT (V) Minimum trigger current IFT (mA) 0 Fig.8 ON-state Voltage vs. Ambient Temperature (PR29MF11NSZ/PR39MF11NSZ) VD=6V RL=100Ω 6 −20 Ambient temperature Ta (˚C) Fig.7 Minimum Trigger Current vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) 7 VD=6V RL=100Ω 4 3 2 1.2 1.1 1 1 0.9 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 100 0.8 −30 Ambient temperature Ta (°C) 0 20 40 60 80 100 Ambient temperature Ta (˚C) Fig.9 ON-state Voltage vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) Fig.10 Relative Holding Current vs. Ambient Temprature (PR29MF11NSZ/PR39MF11NSZ) 1.2 Relative holding current IH (t˚C) / IH (25˚C)×100% IT=0.9A ON-state voltage VT (V) 1.1 1 0.9 0.8 0.7 0.6 −30 0 20 40 60 Ambient temperature Ta (˚C) 80 100 VD=6V 103 102 101 −30 0 20 40 60 Ambient temperature Ta (˚C) 80 100 PR29MF11NSZ Series/PR39MF11NSZ Series Fig.11 Relative Holding Current vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) R load, IF=15mA VD=6V 15 10 Zero-cross voltage VOX (V) Relative holding current IH (t˚C) / IH (25˚C)×100% 103 Fig.12 Zero-cross Voltage vs. Ambient Temperature (PR29MF21NSZ/PR39MF21NSZ) 2 10 −30 0 20 40 60 80 10 5 0 −30 −20 −10 0 10 20 30 40 50 60 70 80 90 100 100 Ambient temperature Ta (˚C) Ambient temperature Ta (˚C) Fig.13 ON-state Current vs. ON-state Voltage (PR29MF11NSZ/PR39MF11NSZ) Fig.14 ON-state Current vs. ON-state Voltage (PR29MF21NSZ/PR39MF21NSZ) 1.2 IF=20mA Ta=25˚C IF=20mA Ta=25˚C 1 ON-state current IT (A) ON-state current IT (A) 1.5 1.2 0.9 0.6 0.3 0.8 0.6 0.4 0.2 0 0 0.5 1 0 1.5 0 ON-state voltage VT (V) Fig.15 Turn-on Time vs. Forward Current (PR29MF11NSZ) 1 000 VD=6V RL=100Ω Ta=25˚C 10 1 10 20 30 40 50 Forward current IF (mA) 1 1.5 Fig.16 Turn-on Time vs. Forward Current (PR39MF11NSZ) Turn-on time tON (µs) Turn-on time tON (µs) 100 0.5 ON-state voltage VT (V) 100 VD=6V RL=100Ω Ta=25˚C 146.5 100 10 1 10 100 Forward current IF (mA) PR29MF11NSZ Series/PR39MF11NSZ Series Fig.17 Turn-on Time vs. Forward Current (Typical Value) (PR29MF21NSZ/PR39MF21NSZ) Turn-on time tON (µs) 100 VD=6V RL=100Ω Ta=25˚C 10 1 10 100 Forward current IF (mA) Application Circuits NOTICE ●The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. ●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. ●Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: --- Personal computers --- Office automation equipment --- Telecommunication equipment [terminal] --- Test and measurement equipment --- Industrial control --- Audio visual equipment --- Consumer electronics (ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: --- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) --- Traffic signals --- Gas leakage sensor breakers --- Alarm equipment --- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: --- Space applications --- Telecommunication equipment [trunk lines] --- Nuclear power control equipment --- Medical and other life support equipment (e.g., scuba). ●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific" applications other than those recommended by SHARP or when it is unclear which category mentioned above controls the intended use. ●If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export such SHARP devices. ●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. ●Contact and consult with a SHARP representative if there are any questions about the contents of this publication. 115