Product Brief SiI9187 PinnaClear™ Port Processor Applications Featuring four HDMI 1.3 input ports with five EDID RAMs • LCD, plasma and projection DTVs Silicon Image’s PinnaClear port processors are a new generation of highly innovative yet cost-effective HDMI solutions for price-sensitive, mid-range DTVs. PinnaClear port processors output directly to the integrated HDMI inputs in DTV SoCs, allowing manufac- Key Features • Four HDMI 1.3 input ports turers to differentiate their products by focusing their R&D efforts on video processing or • Built-in HDCP other proprietary advantages. decryption engines • Five EDID RAMs for The SiI9187 processor’s five integrated Extended All SiI9187 ports support the HDMI 1.3 specifi- Display Identification Data (EDID) RAMs elimi- cation and Deep Color -- the highest quality nate external EPROM components, lower BOM protected digital video over a single cable -- and costs and simplify board design. Source devices 12 bits of video at 1080p/60Hz or 1080i/120Hz can read EDID when DTVs are in standby mode resolutions. The SiI9187 port processor also or when the DTV is unplugged from the wall. comes pre-programmed with HDCP keys to sim- EDID data is stored in NVRAM and down- plify manufacturing and provide the highest loaded into the RAM when a source device is level of HDCP key security. The SiI9187’s built-in adaptive equalizer pro- The SiI9187’s integrated CEC eliminates the vides long cable support, even at Deep Color need for the external microprocessor to manage resolutions. This patented technology enables the low-level protocol. The CEC API simplifies the SiI9187 to work reliably with noisy signals the firmware development of CEC commands. and multiple sources, making the sink devices Using power islands, CEC and EDID functions highly interoperable. SiI9187 Application Diagram • Integrated CEC • Integrated NVRAM stores EDID data • Single 3.3V power supply • Built-in adaptive equalizer provides connected to the DTV. are supported in extremely low power. HDMI & VGA ports long cable support SiI9187 Features SiI9187 Starter Kit Industry-Standard Compliance Content Protection (CP9187HDMI) • HDMI 1.3 • Integrated HDCP cipher engine • DVI 1.0 • Built-in HDCP BIST • EIA/CEA-861D • Pre-programmed HDCP keys: Contents include: Hardware • SiI9187 port processor board • HDMI to HDMI cable • HDCP 1.1 - Simplify manufacturing process • TMDS Transmitter @ 225MHz - Provide extremely secure solution - Lower system, manufacturing costs HDMI Inputs Software • Simon receiver software tool Documentation • User's guide • Schematics • Bill of materials (BOM) • Built-in HDCP self-test • Four HDMI inputs • Supports DTV resolutions up to 1080p @ 60Hz or 720p/1080i @ 120Hz with 36-bit color depth Power Management • Low stand by power mode with auxiliary power mode for CEC and EDID support • Integrated EDID for each HDMI Port and VGA port • Integrated CEC Consumer Electronics Control Package • 72-pin 10x10mm QFN • Pin compatible with Silicon Image’s SiI9285 System Operation and SiI9287 port processors • Register-programmable via slave I2C interface SiI9187 Block Diagram Silicon Image, Inc. 1060 E. Arques Avenue Sunnyvale, CA 94085 T 408.616.4000 F 408.830.9530 www.siliconimage.com Copyright © 2008 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SiI9187, PinnaClear, and the PinnaClear logo are trademarks or registered trademarks of Silicon Image, Inc. in the United States and/or other countries. HDMI, the HDMI logo, High-Definition Multimedia Interface, are trademarks or registered trademarks in the United States and/or other countries and are used under license from HDMI Licensing, LLC. All other trademarks are the property of their respective owner in the United States and/or other countries. Product specifications are subject to change without notice. Part Number: SiI9187CTU SiI-PB-1045 rev1 9/08