99.2MHz SAW Filter 25MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09901 www.sipatsaw.com Features For IF SAW filter Single-ended operation Ceramic Surface Mount Package Small size RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 99.05 99.2 99.35 Insertion Loss dB - 21 25 1.2 dB Bandwidth MHz 24.8 25.24 - 3 dB Bandwidth MHz 25 26.22 - 10 dB Bandwidth MHz - 27.96 - 20 dB Bandwidth MHz - 29.2 - 35 dB Bandwidth MHz - 30.31 31 Passband Variation dB - 0.7 1.2 Absolute Delay usec - 0.92 1.5 Ultimate Rejection(f0±20MHz) dB 40 41 - Material Temperature coefficient KHz/°C -8.13 Substrate Material - 128LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A SMD13.3*6.5C Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN09901 Rev. Date 2008-07-21 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 99.2MHz SAW Filter 25MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09901 www.sipatsaw.com Matching Configuration L1=22nH INPUT 50Ω L1 L2 L2=68nH Source/Load Impedance=50 ohm OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension +0.2 13.3-0.1 9 8 Input: 7 12 3 11 Output: 5 SIPAT LBN09901 XXYYZZ 11 6 +0.2 6.5-0.1 10 Pad Configuration: 5 Ground: All Others 4 Marking Configuration: 1.56 0.1 0.76 0.4 0.79 1 2 3 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) LBN09901: Part Number 4 1.5 4) XXYY: Date(Year/month) 12 5 11 6 10 9 8 5) ZZ: Identified Code 7 2.54 Package: SMD13.3*6.5C Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN09901 Rev. Date 2008-07-21 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 99.2MHz SAW Filter 25MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN09901 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance -10.9144 -19.4144 -20.9144 -19.9144 -30.9144 -20.4144 -20.9144 Amplitude ripple(dB) -50.9144 -60.9144 -70.9144 -21.4144 -21.9144 -80.9144 -22.4144 -90.9144 -22.9144 -100.9144 -110.9144 -23.4144 60 70 80 90 100 110 Frequency(MHz) Horizontal: 10MHz/Div 120 130 Vertical: 10dB/Div 75 80 85 90 95 100 Frequency(MHz) 105 Horizontal: 5MHz/Div Group Delay Variation(f0±22MHz) 110 115 120 Vertical: 0.5dB/Div Phase Linearity(f0±22MHz) Type Performance Type Performance 1050 40 30 1000 20 X: 111.1 Y: 5.265 10 950 X: 87.1 Y: 921.1 X: 99.1 Y: 918.5 X: 87.1 Y: 0.5027 X: 111.1 Y: 915.5 X: 99.1 Y: -1.903 0 Degree(deg) Group Delay Time(ns) 900 -10 -20 850 -30 800 -40 -50 750 95 100 Frequency(MHz) 105 Horizontal: 5MHz/Div 110 -60 115 Vertical: 50ns/Div 80 85 90 95 +j2.0 +j5.0 0.0 0.5 ∞ -j5.0 -j0.2 +j2.0 +j0.2 0.2 5.0 2.0 1.0 Vertical: 10deg/Div +j0.5 +j5.0 +j0.2 0.5 115 +j1.0 +j0.5 ∞ -j5.0 -j0.2 -j2.0 -j2.0 -j0.5 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 110 Smith Chart S22 +j1.0 -j0.5 105 Horizontal: 5MHz/Div Smith Chart S11 0.0 100 Frequency(MHz) 5.0 90 2.0 85 1.0 80 0.2 Magnitude(dB) -40.9144 Part Number LBN09901 Rev. Date 2008-07-21 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3