PRODUCT SUMMARY SKY77602 Multi-Band, Multi-Mode (3G) Power Amplifier Module w/ PA Distribution Switch APPLICATIONS Description • WCDMA Data Application The SKY77602 Power Amplifier Module (PAM) is a fully matched, 22-pad, surface mount module • HSDPA developed for Wideband Code Division Multiple Access (WCDMA) and CDMA2000 applications. This • HSUPA small and efficient module packs full coverage for WCDMA Bands I, II, IV, V, and VIII, and for • HSPA+ CDMA2000 Bands I, II, IV, and V into a single compact package. The SKY77602 meets the stringent • CDMA2000 spectral linearity requirements of WCDMA/CDMA2000 transmission, with high power added efficiency for power output to 28 dBm for Bands I, IV, V, 28.5 dBm for Band II, and 28.3 dBm for Band VIII. The Features SKY77602 meets the stringent spectral linearity requirements of High Speed Downlink Packet Access • Low voltage application - 3.2 V~3.6 V (HSDPA) data transmission with high power added efficiency. An integrated directional coupler eliminates the need for any external coupler. • Good linearity • High efficiency The SKY77602 PAM is manufactured with Skyworks’ InGaP GaAs Heterojunction Bipolar Transistor • Large dynamic range (HBT) BiFET process that provides for all positive voltage DC supply operation while maintaining high • Small, low profile package - 5 mm x 7 mm x 0.85 mm - 22-pad configuration efficiency and good linearity. No regulated voltage is required. Power down is accomplished by setting • Power down control the voltage on VEN_H or VEN_L to zero volts. No external supply side switch is needed as typical “off” leakage is a few microamperes with full primary voltage supplied from the battery. • InGaP • Supports low collector voltage operation • Digital Enable, Band Select, Mode operation • No regulated voltage required • CMOS comparable logic control • Integrated Directional Couplers Figure 1. SKY77602 Functional Block Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201242A • Skyworks Proprietary and Confidential information. • Products and product information are subject to change without notice. • February 9, 2010 1 PRODUCT SUMMARY SKY77602 MULTI-BAND, MULTI-MODE (3G) POWER AMPLIFIER MODULE W/ PA DISTRIBUTION SWITCH Figure 2. SKY77602 Pad Configuration ©2010, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, “Breakthrough Simplicity,” DCR, Helios, HIP3, Innovation to Go, Intera, iPAC, LIPA, Polar Loop, and System Smart are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.