SOURCE C-13-DFBA-PB-SLC

Analog 1310 nm MQW-DFB Laser Diode Module
C-13-DFBA-PX-SXXXI/XXX-X
Features
• Laser diode with multi-quantum-well structure
• Un-cooled operation at -20 to +85ºC
• Built-in InGaAs monitor photodiode
• Hermetically sealed active component
• Complies with Telcordia Technologies GR-468-CORE
• Single frequency operation with high SMSR
• Fiber pigtailed package with optional FC/ST/SC/MU/LC connector
• Design for Analog fiber-optics application
Absolute Maximum Rating (Tc=25ºC)
Parameter
Symbol
Value
Unit
Pf
2.5(H)/4(2)
mW
V
Fiber Output Power H&2
Reverse Voltage
VRLD
2
PD Reverse Voltage
VRPD
20
V
PD Forward Current
IFPD
2.0
mA
Operating Temperature
Topr
-20 to +85
ºC
Storage Temperature
Tstg
-40 to +85
ºC
(All optical data refer to a coupled 9/125µm SM fiber)
Optical and Electrical Characteristics( T=25ºC )
Parameter
Symbol
Min
Typical
Max
Unit
Test Condition
Threshold Current
Ith
-
10
20
mA
CW
Operating Current
Iop
-
20
40
mA
CW, Pf=Pf(Min)
Optical Output Power
H
2
Pf
1
2
-
2
-
mW
CW, Ith+20mA, kink free
Operating Voltage
VF
-
1.2
1.8
V
CW, Pf=Pf(Min)
Peak Wavelength
λ
1280
1310
1335
nm
CW, Pf=Pf(Min), RMS(-20dB) TC=-20~85ºC
Side mode Suppression Ratio
Sr
dB
CW,Pf=Pf(Min), -20 to 85ºC
mW/mA
CW, Pf=Pf(Min)
dB
-20<Tc<85ºC
Ibias=Ith ,10% to 90%
Slope Efficiency
H
2
Se
30
40
-
0.05
-
0.1
0.1
-
-
45
-
-
30
-
-
Optical Isolation
OI
Rise Time/Fall Time
tr/tf
-
-
0.5
ns
Relative Intensity Noise
RIN
-
-150
-145
dB/Hz
CW
Second Order Distortion
SSO
-
-
-40
dBc
Note 1
Third Order Distortion
STO
-
-
-50
dBc
Note 1
Im
100
-
-
µA
CW, Pf=Pf(Min),VRPD=2V
IDARK
-
-
1.0
µA
VRPD=5V
C
-
6
15
pF
VRPD=5V, f=1MHz
∆Pf /Pf
-1.5
-
1.5
dB
APC, -20 to +85ºC
Monitor Current
Monitor Dark Current
Photodiode Capacitance
Tracking Error
Note1.The laser is modulated with two-carrier tones (f1=13MHz,f2=19MHz) at OMI=15% per carrier tone
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS537-MAY2405
rev. A.2
Analog 1310 nm MQW-DFB Laser Diode Module
C-13-DFBA-PX-SXXXI/XXX-X
Pin Assignment
Units in mm.
D Type
B Type
CASE
LD
PD
Pin
Pin
Pin
Pin
LUMINENTOIC.COM
1
2
3
4
:
:
:
:
Monitor Diode Anode
Laser Anode and Case Gnd
Laser Cathode
Monitor Diode Cathode
Pin
Pin
Pin
Pin
1
2
3
4
:
:
:
:
Laser Anode and Monitor Diode Cathode
Case Gnd
Laser Cathode
Monitor Diode Anode
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS537-MAY2405
rev. A.2
Analog 1310 nm MQW-DFB Laser Diode Module
C-13-DFBA-PX-SXXXI/XXX-X
Ordering Information
C-13-DFBA-PX-SXXXI/XXX-X
Wavelength
13=1310nm
Analog
Package
Connector
Pin Assignment
Fiber Output Power
P=Pigtail
B = B Type
D = DType
FC/ST/SC/MU/LC/-
H&2
"I" = Isolator
 PC Fiber
APC  APC Fiber
Flange type (-;O;V;K)
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended.
Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notice
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants
performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated
as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express,
implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or
intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and
LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights.
Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury
or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and
indemnify LuminentOIC for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2004
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS537-MAY2405
rev. A.2