1550nm Emitting(DFB),1310nm Receiving(PIN-TIA,3.3V), Bi-directional Diplexer Optical Module C-15/13-DXX-BX-SSCX-XX Features • Single fiber bi-directional operation • Laser diode with multi-quantum- well structure • Low threshold current • InGaAs/InP PIN Photodiode with trans-impedance amplifier • High sensitivity with AGC* • Differential ended output • Single +3.3V Power Supply • Integrated WDM coupler • Un-cooled operation from 0ºC to +70ºC • Hermetically sealed active component • SC receptacle package • Design for fiber optic networks • RoHS Compliant available Absolute Maximum Rating (Tc=25ºC) Parameter Fiber Output Power Symbol Value Unit Pf 0.6(L) / 1(M) / 2(H) mW L/M/H LD Reverse Voltage VRLD 2 V PIN-TIA Voltage VCC 4.5 V Operating Temperature Topr 0 ~ +70 ºC Storage Temperature Tstg -40 ~ +85 ºC (All optical data refer to a coupled 9/125µm SM fiber) Optical and Electrical Characteristics( Tc=25ºC) Parameter Laser Diode Optical Output Power Symbol Min Typical Max Unit Test Condition L M H 0.2 0.5 1 1.6 0.5 1 - mW CW, Ith+ 30mA , kink free λ 1535 1550 1565 nm CW, Pf=Pf(Min) Side mode Supperssion ∆λ 30 35 - nm CW, Pf=Pf(Min),0~70ºC Threshold Current Ith - 10 15 mA CW Forward Voltage VF - 1.2 1.5 V CW, Pf=Pf(Min) tr/ tf - - 0.3 ns Ibias=Ith ,10% ~ 90% Im 100 - - µA CW, Pf=Pf(Min),VRPD=2V Dark Current IDARK - - 0.1 µA VRPD=5V Capacitance Ct - 6 15 pF VRPD=5V, f=1MHz ∆Pf/Pf -1.5 - 1.5 dB APC, 0 ~ +70ºC Peak Wavelength Rise/Fall Time Monitor Diode Monitor Current Module Tracking Error Optical Crosstalk CRT < -45 dB Note: 1.Pin assignment can be customized. 2.Specifications subject to change without notice. LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS1518-FEB0706 rev. A.0 1550nm Emitting(DFB),1310nm Receiving(PIN-TIA,3.3V), Bi-directional Diplexer Optical Module C-15/13-DXX-BX-SSCX-XX Detector λ=1100~1430nm DC Electrical Characteristics( Tc=25ºC) Parameter Symbol Min Typical Max Unit Power Supply Vcc 3.0 3.3 3.6 V D02 - - 1000 D04 - 260 450 D06 185 250 415 D02 - - 35 D04 - 21 30 D06 - 26 50 Vd Differential Output Voltage Icc Supply Current (no load) Test Condition mV mA AC/Optical and Electrical Characteristics( Tc=25ºC) Parameter Symbol Detection Range D02 Gain @ 10 Mbps Differential Bandwidth Saturation Power Sensitivity Output Resistance LUMINENTOIC.COM G BW Psat Sens. Rout Min Typical Max Unit Test Condition 1100 1310 1430 nm - 52 - 70 Measure differentially, AC coupled, RL=50Ω V/mW Measure differentially, AC coupled, RL=50Ω D04 6 7 - D06 1.92 2.5 3.4 D02 120 140 - D04 404 470 - D06 700 920 1100 D02 -3 0 - D04 -7 -6 - D06 -3 - - BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB D02 - -38 -35 BER<10-10 @155Mbps PRBS 223-1,Er=10dB D04 - -33 -30 D06 - -26 -23 D02 - 50 - D04 48 50 52 D06 48 50 62 Measure differentially with 30uAp-p signal MHz BER<10-10 @155Mbps PRBS 223-1,Er=10dB dBm dBm BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-10 @622Mbps PRBS 223-1,Er=10dB BER<10-12 @1.25Gbps PRBS 27-1,Er=10dB ohm 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS1518-FEB0706 rev. A.0 1550nm Emitting(DFB),1310nm Receiving(PIN-TIA,3.3V), Bi-directional Diplexer Optical Module C-15/13-DXX-BX-SSCX-XX Pin Assignment Units in mm. Part Number: C-15/13-DXX-BX-SSCX-XX PIN-TIA Pin Assignment LD Pin Assignment A Type D Type Pin 1 : Laser Cathode Pin 2 : Laser Anode and Case Gnd Pin 3 : Monitor Diode Anode Pin 4 : Monitor Diode Cathode Pin 1 : Laser Anode and Monitor Diode Cathode Pin 2 : Case Gnd Pin 3 : Laser Cathode Pin 4 : Monitor Diode Anode Functional Schematic Outline Dimensions Units in mm. 2 1 3 4 A DIMENSION A: 7.2~7.8mm (Low power) A: 9.3~9.9mm (Middle & High power) LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS1518-FEB0706 rev. A.0 1550nm Emitting(DFB),1310nm Receiving(PIN-TIA,3.3V) , Bi-directional Diplexer Optical Module C-15/13-DXX-BX-SSCX-XX Ordering Information C-15/13-DXX-BX-SSCX-XX 1550nm Transmitter 1310nm Receiver 02: 155Mb/s PIN-TIA+3.3V 04: 622Mb/s PIN-TIA+3.3V 06: 1250Mb/s PIN-TIA+3.3V Connector Package SC B=BOSA Fiber Application Fiber Output Power S= 9/125µm Pin Assignment - = A Type D = D Type L/M/H RoHS Compliant -/G5/GR Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption) GR = Full RoHS compliant product (no exemption) Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC＇s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company＇s standard one-year warranty; however, specifications designated as “preliminary＂ are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company＇s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS＂ BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2006 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS1518-FEB0706 rev. A.0