SOURCE FTM-33X0C

Nov. 1, 2006
10Gbps 1310nm XFP Transceiver
(Up to 10km transmission)
Members of FlexonTM Family
Compliant with FCC 47 CFR Part 15, Class B
Compliant with FDA 21 CFR 1040.10 and
1040.11, Class I
RoHS compliance
Description
FTM-33X0C-X10G is a high performance, cost
effective modules, which is optimized for 10G
Ethernet, supporting data-rate of 10.3125Gbps
Features
(10GBASE-LR) or 9.953Gbps (10GBASE-LW), and
transmission distance up to 10km.
Support 10GE application at the data-rate of
10.3125Gbps and 9.953Gbps
The transceiver consists of two sections: The
Up to 10km transmission
transmitter section incorporates a 1310nm uncooled
1310nm uncooled EML and PIN receiver
EML, driver and re-timer. The receiver section
XFI electrical interface
consists of a PIN photodiode integrated with a
2-wire interface for integrated Digital Diagnostic
transimpedance preamplifier (TIA) and CDR.
monitoring
XFP MSA package with duplex LC connector
The module is hot pluggable into the 30-pin
Hot pluggable
connector. The high-speed electrical interface is
Very low EMI and excellent ESD protection
base on low voltage logic, with nominal 100 Ohms
+5V, +3.3V power supply
differential impedance and AC coupled in the
Power consumption less than 2.5 W
module. The optical output can be disabled by
Support industrial temperature
LVTTL logic high-level input of TX_DIS. Loss of
signal (RX_LOS) output is provided to indicate the
Applications
loss of an input optical signal of receiver.
10GBASE-LR at 10.3125Gbps
A serial EEPROM in the transceiver allows the user
10GBASE-LW at 9.953Gbps
to access transceiver monitoring and configuration
Other optical links
data via the 2-wire XFP Management Interface. This
interface uses a single address, A0h, with a memory
Standard
map divided into a lower and upper area. Basic
digital diagnostic (DD) data is held in the lower area
Compliant with XFP MSA
while specific data is held in a series of tables in the
Compliant with IEEE 802.3ae-2002
high memory area.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 1 of 1
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Regulatory Compliance
The transceivers are tested according to American and European product safety and electromagnetic
compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer
to Fiberxon regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office
listed at the end of the documentation.
Table 1- Regulatory Compliance
Feature
Standard
Electrostatic Discharge
MIL-STD-883E
(ESD) to the Electrical Pins
Method 3015.7
Electrostatic Discharge (ESD)
IEC 61000-4-2
to the Duplex LC Receptacle
GR-1089-CORE
Performance
Class 1(>500 V)
Compliant with standards
FCC Part 15 Class B
Electromagnetic
EN55022 Class B (CISPR 22B)
Interference (EMI)
Compliant with standards
VCCI Class B
Immunity
IEC 61000-4-3
Compliant with standards
FDA 21CFR 1040.10 and 1040.11
Laser Eye Safety
EN60950, EN (IEC) 60825-1,2
Component Recognition
Compliant with Class 1 laser
product.
TUV Certificate No. 50083024
UL and CSA
UL file E223705
Absolute Maximum Ratings
Stress in excess of the maximum absolute ratings can cause permanent damage to the module.
Table 2 - Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
TS
-40
+85
°C
VCC5
-0.5
6.0
V
VCC3
-0.5
4.0
V
85
%
Storage Temperature
Supply Voltage
Operating Relative Humidity
RH
Recommended Operating Conditions
Table 3 - Recommended Operating Conditions
Parameter
Operating
Temperature
Power Supply Voltage
Power Supply Current
Power Dissipation
Data Rate
Case
Symbol
Standard
Extended
TC
Industrial
Min.
Typical
Max.
0
+70
-40
+70
-40
+85
VCC5
4.75
5.0
5.25
VCC3
3.13
3.3
3.47
ICC5
200
ICC3
500
PD
2.5
9.953/10.3125
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 2 of 2
Last printed 2006-11-1 20:04
Unit
°C
V
mA
W
Gbps
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Optical Characteristics
Table 4 - Optical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
Transmitter
9.953/
Operating Data Rate
Centre Wavelength
Gbps
10.3125
λC
1260
1355
nm
Average Output Power
P0UT
-8.2
+0.5
dBm
1
Optical Modulation Amplitude
OMA
-5.2
dBm
1
Spectral Width
Side Mode Suppression Ratio
∆λ
1
nm
SMSR
30
dB
Extinction Ratio
EX
3.5
dB
2
Dispersion Penalty
DP
dB
2
Optical Eye Mask
3.2
Compliant with IEEE 802.3ae
Receiver
9.953/
Operating Data Rate
Centre Wavelength
λC
Receiver Sensitivity
PIN
Receiver Sensitivity in OMA
PIN
Receiver Overload
PIN
LOS Assert
LOSA
LOS Deassert
LOSD
LOS Hysteresis
Gbps
10.3125
1260
1600
nm
-14.4
dBm
3
-12.6
dBm
3
0.5
dBm
3
-25
dBm
-16
1
Receiver Reflectance
-15
dBm
4
dB
-12
dB
Notes:
1.
The optical power is launched into SMF.
2.
Measured with a PRBS 231-1 test pattern @10.3125Gbps.
3.
Measured with a PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 3 of 3
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Electrical Characteristics
Table 5 - Electrical Characteristics
Parameter
Symbol
Min.
Typical
Max.
Unit
Notes
High-speed Signal (CML) Interface Specification
9.953/
Input Data Rate
Gbps
10.3125
Differential Data Input Amplitude
120
Input Differential Impedance
1200
100
Gbps
10.3125
Differential Date Output Amplitude
500
Output Differential Impedance
800
100
mVpp
Ω
Low-speed Signal (LVTTL) Interface Specification
Input High Voltage
2.0
Vdd1=3.3
V
Input Low Voltage
GND
0.8
V
Output High Voltage
2.4
Vdd1=3.3
V
Output Low Voltage
GND
0.4
V
400
kHz
2 Wire Serial Interface (LVTTL) Specification
Clock Frequency
fSCL
Reference Clock (PECL) Interface Specification
No reference clock
Notes:
1.
Internally AC coupled
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
1
Ω
9.953/
Output Data Rate
mVpp
Page 4 of 4
Last printed 2006-11-1 20:04
1
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Management Interface
The structure of the memory map is shown in Figure 1, which is accessible over a 2 wire serial interface at the
8-bit address 1010000X (A0h). The normal 256 Byte I2C address space is divided into lower and upper
blocks of 128 Bytes. The lower block of 128 Bytes is always directly available and is used for the diagnostics
and control function. The monitoring specification is shown in Table 6. Multiple blocks of memories are
available in the upper 128 Bytes of the address space. These are individually addressed through a table
select Byte which the user enters into a location in the lower address space. Thus, there is a total available
address space of 128 * 256 = 32Kbytes in this upper memory space. The contents of Table 01h are list in table
7 below. PLS refer INF-8077i (Revision 4.0) for detailed information.
Figure 1, 2-wire Serial Digital Diagnostic Memory Map
Table 6 - Monitoring Specification
Data Address
Parameter
Range
Accuracy
-10 to +80°C (Standard)
96-97
Temperature
-40 to +80°C (Extended)
±3°C
-40 to +90°C (Industrial)
100-101
Bias Current
0 to 100mA
±10%
102-103
TX Power
-9 to +1dBm
±2dB
104-105
RX Power
-16 to 0dBm
±2dB
106-107
VCC5 Voltage
+4.5V to +5.5V
±3%
108-109
VCC3 Voltage
+3.0V to +3.7V
±3%
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 5 of 5
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Table 7 - Serial ID Memory Contents (Table 01h)
Field
Addr.
Size
Name of Field
Hex
Description
(Bytes)
128
1
Identifier
06
XFP
129
1
Ext. Identifier
50
TX Ref Clock Input not Required
130
1
Connector
07
LC Connector
131-138
8
Transceiver
44 00 00 00 00 00 00 00
139
1
Encoding
10
NRZ
140
1
BR-Min
63
9.953Gbps
141
1
BR-Max
6F
11.1Gbps
142
1
Length (9um)-km
0A
10km
143
1
Length (E-50um)
00
144
1
Length (50um)
00
145
1
Length (62.5um)
00
146
1
Length (copper)
00
147
1
Device Tech
60
148-163
16
Vendor name
164
1
CDR Support
165-167
3
Vendor OUI
168-183
16
Vendor PN
184-185
2
Vendor rev
xx xx
ASCⅡ( “32 61” means 2a revision)
186-187
2
Wavelength
66 58
1310nm
188-189
2
190
1
Max Case Temp
191
1
CC_BASE
192-195
4
Power Supply
196-211
16
Vendor SN
212-219
8
Vendor date code
220
1
Diagnostic type
08
No BER Support, Average Power
221
1
Enhanced option
60
Optional Soft Tx_Disable and P_Down
222
1
Aux Monitoring
67
+5.0V and +3.3V Supply Voltage
223
1
CC EXT
xx
Check sum of bytes 192 - 222
224-255
32
Vendor specific
46 49 42 45 52 58 4F 4E
20 49 4E 43 2E 20 20 20
F8
10GBASE-LR/W
1310nm EML, PIN Detector
“FIBERXON INC. “(ASCⅡ)
CDR supports 9.953Gbps~11.1Gbps
00 00 00
46 54 4D 2D 33 33 58 30
43 2D 58 31 30 47 20 20
“FTM-33X0C-X10G” (ASCⅡ)
Wavelength Tolerance25 1C
xx
+/- 47.5nm
“46” is 70degC, “55” is 85degC
Check sum of bytes 128 - 190
7D 96 45 00
2.5W (max), 1.5W (max, power down mode),
200mA(max, +5.0V), 500mA (max, +3.3V)
xx xx xx xx xx xx xx xx
ASCⅡ.
xx xx xx xx xx xx xx xx
xx xx xx xx xx xx 20 20
Year (2 bytes), Month (2 bytes), Day (2 bytes)
Reserved By Vendor
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 6 of 6
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Recommended Host Board Power Supply Circuit
Figure 2 shows the recommended host board power supply circuit.
Figure 2, Recommended Host Board Power Supply Circuit
Recommended Interface Circuit
Figure 3 shows the recommended interface circuit.
Host Board
XFP Module
Z=50 Ω
TD +
Z=50Ω
TD -
SerDat In +
Z=50Ω
RD +
SerDat In -
Z=50Ω
SerDat Out +
CML
SerDat Out -
100Ω
CML
100Ω
CML
CML
RD REFCLKP
100 Ω
Vcc (+3.3V)
4.7K to 10KΩ
REFCLKN
RX_LOS
INTERRUPT
SDA
SCL
Vcc (+3.3V)
MOD_NR
MOD_abs
TX_DIS
10K Ω
GND
MOD_DeSel
P_Down/RST
Figure 3, Recommended Interface Circuit
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 7 of 7
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Pin Definitions
Figure 4 below shows the pin numbering of XFP electrical interface. The pin functions are described in Table 5
with some accompanying notes.
Figure 4, Pin View
Table 8 – Pin Function Definitions
Pin
Logic
Symbol
Name/Description
1
GND
Module Ground
2
VEE5
Optional -5.2V Power Supply (Not implemented)
Mod_Desel
Module De-select; When held low allows the module to respond to
3
LVTTL-I
Note
1
2-wire serial interface
4
LVTTL-O
Interrupt
Interrupt; Indicates presence of an important condition which can
be read over the 2-wire serial interface
5
6
LVTTL-I
TX_DIS
Transmitter Disable; Turns off transmitter laser output
VCC5
+5V Power Supply
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 8 of 8
Last printed 2006-11-1 20:04
2
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
7
GND
Module Ground
8
VCC3
+3.3V Power Supply
9
VCC3
+3.3V Power Supply
1
10
LVTTL-I/O
SCL
2-Wire Serial Interface Clock
2
11
LVTTL-I/O
SDA
2-Wire Serial Interface Data Line
2
12
LVTTL-O
Mod_Abs
Indicates Module is not present. Grounded in the Module
2
13
LVTTL-O
Mod_NR
Module Not Ready; Indicating Module Operational Fault
2
14
LVTTL-O
RX_LOS
Receiver Loss Of Signal Indicator
2
15
GND
Module Ground
1
16
GND
Module Ground
1
17
CML-O
RD-
Receiver Inverted Data Output
18
CML-O
RD+
Receiver Non-Inverted Data Output
19
GND
Module Ground
1
20
VCC2
+1.8V Power Supply (Not implemented).
3
P_Down/RST
Power down; When high, requires the module to limit power
21
LVTTL-I
consumption to 1.5W or below. 2-Wire serial interface must be
functional in the low power mode.
Reset; The falling edge initiates a complete reset of the module
including the2-wire serial interface, equivalent to a power cycle.
22
VCC2
+1.8V Power Supply (Not implemented)
3
23
GND
Module Ground
1
24
PECL-I
RefCLK+
Not used, internally terminated to 50ohm (100ohm diff).
4
25
PECL-I
RefCLK-
Not used, internally terminated to 50ohm (100ohm diff).
4
26
GND
Module Ground
1
27
GND
Module Ground
1
28
CML-I
TD-
Transmitter Inverted Data Input
29
CML-I
TD+
Transmitter Non-Inverted Data Input
GND
Module Ground
30
1
1.
Module ground pins GND are isolated from the module case and chassis ground within the module.
2.
Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board.
3.
The pins are open within module.
4.
Reference Clock is not required.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 9 of 9
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Mechanical Design Diagram
Blue Lever
LABEL
Figure 5, Mechanical Design Diagram of XFP
Ordering information
FTM
3
3
X
Wavelength
3: 1310nm
C
X
1
0
Distance
10: 10km
Function
3: With CDR
Data rate
X0: Multi-rate (Optimized for 10GE)
Part No.
0
G
G: RoHS Compliance
Temperature
S: Standard Temp (0~+70°C)
Package
E: Extended Temp (-40~+70°C)
X: XFP
i: Industrial Temp (-40~+85°C)
(For standard temperature, this
Receptacle bit can be omitted.)
C: LC
Product Description
FTM-33X0C-X10G
1310nm EML, multi-rate for 10GE 10km, XFP, 0°C~+70°C, RoHS Compliance
FTM-33X0C-X10EG
1310nm EML, multi-rate for 10GE, 10km, XFP, -40°C~+70°C, RoHS Compliance
FTM-33X0C-X10iG
1310nm EML, multi-rate for 10GE, 10km, XFP, -40°C~+85°C, RoHS Compliance
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 10 of 10
Last printed 2006-11-1 20:04
10Gbps 1310nm XFP Transceiver
Up to 10 km transmission
Nov. 1, 2006
Related Documents
■
INF-8077i (10 Gigabit Small Form Factor Pluggable Module), Revision 4.0
Obtaining Document
You can visit our website:
http://www.fiberxon.com
Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest
documents.
Revision History
Revision
Initiate
Review
Approve
Subject
Release Date
Rev. 1a
Andy.Xiao
Stella.Li
Alain.Shang
Initial datasheet
Mar. 20, 2006
Rev. 1b
Andy.Xiao
Stella.Li
Alain.Shang
Changed extended temperature
Mar. 28, 2006
from “–5~+85°C” to “-20~+85°C”
Rev.1c
Andy.Xiao
Stella.Li
Alain.Shang
Changed extended temperature
Nov. 1, 2006
from “–5~+85°C” to “-40~+70°C”
© Copyright Fiberxon Inc. 2006
All Rights Reserved.
All information contained in this document is subject to change without notice. The products described in this
document are NOT intended for use in implantation or other life support applications where malfunction may
result in injury or death to persons.
The information contained in this document does not affect or change Fiberxon product specifications or
warranties. Nothing in this document shall operate as an express or implied license or indemnity under the
intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained
in specific environments, and is presented as an illustration. The results obtained in other operating
environment may vary.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event
will Fiberxon be liable for damages arising directly from any use of the information contained in this document.
Contact
U.S.A. Headquarter:
5201 Great America Parkway, Suite 340
Santa Clara, CA 95054
U. S. A.
Tel: 408-562-6288
Fax: 408-562-6289
Or visit our website: http://www.fiberxon.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute
Controlled Electronic Version. 24hrs Obsolete when printed out without authorization.
Page 11 of 11
Last printed 2006-11-1 20:04