Jun. 16, 2006 10G 1550nm XFP Transceiver (Up to 40km transmission) Members of FlexonTM Family Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I RoHS compliance Description FTM-53X0C-X40G is a high performance, cost effective modules, which is optimized for 10G Ethernet, supporting data-rate of 10.3125Gbps (10GBASE-ER) or 9.953Gbps (10GBASE-EW), and Features transmission distance up to 40km. Support 10GE application at the data-rate of The transceiver consists of two sections: The 10.3125Gbps and 9.953Gbps transmitter section incorporates a 1550nm cooled Up to 40km transmission EML, driver and re-timer. The receiver section 1550nm cooled EML and PIN receiver consists of a PIN photodiode integrated with a XFI electrical interface transimpedance preamplifier (TIA) and CDR. 2-wire interface for integrated Digital Diagnostic monitoring The module is hot pluggable into the 30-pin XFP MSA package with duplex LC connector connector. The high-speed electrical interface is Hot pluggable base on low voltage logic, with nominal 100 Ohms Very low EMI and excellent ESD protection differential impedance and AC coupled in the +5V, +3.3V power supply module. The optical output can be disabled by Power consumption less than 3.5 W LVTTL logic high-level input of TX_DIS. Loss of signal (RX_LOS) output is provided to indicate the Applications loss of an input optical signal of receiver. 10GBASE-ER at 10.3125Gbps A serial EEPROM in the transceiver allows the user 10GBASE-EW at 9.953Gbps to access transceiver monitoring and configuration Other optical links data via the 2-wire XFP Management Interface. This interface uses a single address, A0h, with a memory Standard map divided into a lower and upper area. Basic digital diagnostic (DD) data is held in the lower area Compliant with XFP MSA while specific data is held in a series of tables in the Compliant with IEEE 802.3ae-2002 high memory area. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 1 of 1 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Regulatory Compliance The transceivers are tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to Fiberxon regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation. Table 1- Regulatory Compliance Feature Standard Electrostatic Discharge MIL-STD-883E (ESD) to the Electrical Pins Method 3015.7 Electrostatic Discharge (ESD) IEC 61000-4-2 to the Duplex LC Receptacle GR-1089-CORE Performance Class 1(>500 V) Compliant with standards FCC Part 15 Class B Electromagnetic EN55022 Class B (CISPR 22B) Interference (EMI) Compliant with standards VCCI Class B Immunity IEC 61000-4-3 Compliant with standards FDA 21CFR 1040.10 and 1040.11 Laser Eye Safety EN60950, EN (IEC) 60825-1,2 Component Recognition Compliant with Class 1 laser product. TUV certificate No. 50085781 UL and CSA UL file E223705 Absolute Maximum Ratings Stress in excess of the maximum absolute ratings can cause permanent damage to the module. Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Max. Unit TS -40 +85 °C VCC5 -0.5 6.0 V VCC3 -0.5 4.0 V 85 % Storage Temperature Supply Voltage Operating Relative Humidity RH Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Operating Case Temperature Power Supply Voltage Power Supply Current Power Dissipation Data Rate Symbol Standard Extended TC Min. Typical Max. 0 +70 -40 +70 VCC5 4.75 5.0 5.25 VCC3 3.13 3.3 3.47 Unit °C V ICC5 200 mA ICC3 750 mA PD 3.5 W 9.953/10.3125 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 2 of 2 Last printed 2006-07-13 13:45 Gbps 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Optical Characteristics Table 4 - Optical Characteristics Parameter Symbol Min. Typical Max. Unit Notes Transmitter 9.953/ Operating Data Rate Centre Wavelength Gbps 10.3125 λC 1530 1565 nm Average Output Power P0UT -4.7 4.0 dBm 1 Optical Modulation Amplitude OMA -2.1 dBm 1 Spectral Width Side Mode Suppression Ratio ∆λ 1 nm SMSR 30 dB Extinction Ratio ER 6 Dispersion Penalty DP Optical Eye Mask Compliant with ITU-T G.691 and GR-253-CORE 8 3.0 dB 2 dB 2 Receiver 9.953/ Operating Data Rate Centre Wavelength λC Receiver Sensitivity PIN Receiver Overload PIN LOS Assert LOSA LOS Deassert LOSD LOS Hysteresis Gbps 10.3125 1530 1565 nm -15.8 dBm 3 -1 dBm 3 -25 dBm 1 Receiver Reflectance -16 dBm 4 dB -26 dB Notes: 1. The optical power is launched into SMF. 2. Measured with a PRBS 231-1 test pattern @10.3125Gbps. 3. Measured with a PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 3 of 3 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Electrical Characteristics Table 5 - Electrical Characteristics Parameter Symbol Min. Typical Max. Unit Notes High-speed Signal (CML) Interface Specification 9.953/ Input Data Rate Gbps 10.3125 Differential Data Input Amplitude 120 Input Differential Impedance 1000 100 Gbps 10.3125 Differential Date Output Amplitude 500 Output Differential Impedance 800 100 mVpp Ω Low-speed Signal (LVTTL) Interface Specification Input High Voltage 2.0 Vdd1=3.3 V Input Low Voltage GND 0.8 V Output High Voltage 2.4 Vdd1=3.3 V Output Low Voltage GND 0.4 V 400 kHz 2 Wire Serial Interface (LVTTL) Specification Clock Frequency fSCL Reference Clock (PECL) Interface Specification No reference clock needed Note: 1. Internally AC coupled Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. 1 Ω 9.953/ Output Data Rate mVpp Page 4 of 4 Last printed 2006-07-13 13:45 1 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Management Interface The structure of the memory map is shown in Figure 1, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The normal 256 Byte I2C address space is divided into lower and upper blocks of 128 Bytes. The lower block of 128 Bytes is always directly available and is used for the diagnostics and control function. The monitoring specification is shown in Table 6. Multiple blocks of memories are available in the upper 128 Bytes of the address space. These are individually addressed through a table select Byte which the user enters into a location in the lower address space. Thus, there is a total available address space of 128 * 256 = 32Kbytes in this upper memory space. The contents of Table 01h are list in table 7 below. PLS refer INF-8077i (Revision 4.0) for detailed information. Figure 1, 2-wire Serial Digital Diagnostic Memory Map Table 6 - Monitoring Specification Data Address Parameter Range Accuracy 96-97 Temperature 100-101 Bias Current 0 to 100mA ±10% 102-103 TX Power -6 to +5dBm ±2dB 104-105 RX Power -18 to 0dBm ±2dB 106-107 VCC5 Voltage +4.5V to +5.5V ±3% 108-109 VCC3 Voltage +3.0V to +3.7V ±3% -10 to +80°C (Standard) -40 to +80°C (Extended) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. ±3°C Page 5 of 5 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Table 7 - Serial ID Memory Contents (Table 01h) Field Addr. Size Name of Field Hex Description (Bytes) 128 1 Identifier 06 XFP 129 1 Ext. Identifier 50 TX Ref Clock Input not Required 130 1 Connector 07 LC Connector 131-138 8 Transceiver 22 00 00 00 00 00 00 00 139 1 Encoding 10 NRZ 140 1 BR-Min 63 9.953Gbps 141 1 BR-Max 71 11.3Gbps 142 1 Length (SMF)-km 28 40km 143 1 Length (E-50um) 00 144 1 Length (50um) 00 145 1 Length (62.5um) 00 146 1 Length (copper) 00 147 1 Device Tech 74 148-163 16 Vendor name 164 1 CDR Support 165-167 3 Vendor OUI 168-183 16 Vendor PN 184-185 2 Vendor rev xx xx ASCⅡ( “32 61” means 2a revision) 186-187 2 Wavelength 79 18 1550nm 188-189 2 190 1 Max Case Temp 191 1 CC_BASE 192-195 4 Power Supply 196-211 16 Vendor SN 212-219 8 Vendor date code 220 1 Diagnostic type 08 No BER Support, Average Power 221 1 Enhanced option 60 Optional Soft Tx_Disable and P_Down 222 1 Aux Monitoring 67 +5.0V and +3.3V Supply Voltage 223 1 CC EXT xx Check sum of bytes 192 - 222 224-255 32 Vendor specific 10GBASE-ER/W Cooled1550nm EML, PIN Detector 46 49 42 45 52 58 4F 4E “FIBERXON INC. “(ASCⅡ) 20 49 4E 43 2E 20 20 20 F8 CDR supports 9.953Gbps~11.1Gbps 00 00 00 46 54 4D 2D 35 33 58 30 “FTM-53X0C-X40G” (ASCⅡ) 43 2D 58 34 30 47 20 20 Wavelength Tolerance 0D AC +/-17.5nm 46 70degC Check sum of bytes 128 - 190 AF 96 AA 00 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 3.5W (max), 1.5W (max, power down mode), 500mA(max, +5.0V), 1000mA (max, +3.3V) ASCⅡ. xx xx xx xx xx xx 20 20 Year (2 bytes), Month (2 bytes), Day (2 bytes) Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Reserved By Vendor Page 6 of 6 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Recommended Host Board Power Supply Circuit Figure 2 shows the recommended host board power supply circuit. Figure 2, Recommended Host Board Power Supply Circuit Recommended Interface Circuit Figure 3 shows the recommended interface circuit. Host Board XFP Module Z=50 Ω TD + Z=50Ω TD - SerDat In + Z=50Ω RD + SerDat In - Z=50Ω SerDat Out + CML SerDat Out - 100Ω CML 100Ω CML CML RD REFCLKP 100 Ω Vcc (+3.3V) 4.7K to 10KΩ REFCLKN RX_LOS INTERRUPT SDA SCL Vcc (+3.3V) MOD_NR MOD_abs TX_DIS 10K Ω GND MOD_DeSel P_Down/RST Figure 3, Recommended Interface Circuit Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 7 of 7 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Pin Definitions Figure 4 below shows the pin numbering of XFP electrical interface. The pin functions are described in Table 5 with some accompanying notes. Figure 4, Pin View Table 8 – Pin Function Definitions Pin Logic Symbol Name/Description 1 GND Module Ground 2 VEE5 Optional -5.2V Power Supply (Not implemented) Mod_Desel Module De-select; When held low allows the module to respond to 3 LVTTL-I Note 1 2-wire serial interface 4 LVTTL-O Interrupt Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface 5 6 LVTTL-I TX_DIS Transmitter Disable; Turns off transmitter laser output VCC5 +5V Power Supply Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 8 of 8 Last printed 2006-07-13 13:45 2 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet 7 GND Module Ground 8 VCC3 +3.3V Power Supply 9 VCC3 +3.3V Power Supply Jun. 16, 2006 1 10 LVTTL-I/O SCL 2-Wire Serial Interface Clock 2 11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2 12 LVTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 2 13 LVTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 2 14 LVTTL-O RX_LOS Receiver Loss Of Signal Indicator 2 15 GND Module Ground 1 16 GND Module Ground 1 17 CML-O RD- Receiver Inverted Data Output 18 CML-O RD+ Receiver Non-Inverted Data Output 19 GND Module Ground 1 20 VCC2 +1.8V Power Supply (Not implemented). 3 P_Down/RST Power down; When high, requires the module to limit power 21 LVTTL-I consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode. Reset; The falling edge initiates a complete reset of the module including the2-wire serial interface, equivalent to a power cycle. 22 VCC2 +1.8V Power Supply (Not implemented) 3 23 GND Module Ground 1 24 PECL-I RefCLK+ Not used, internally terminated to 50ohm (100ohm diff). 4 25 PECL-I RefCLK- Not used, internally terminated to 50ohm (100ohm diff). 4 26 GND Module Ground 1 27 GND Module Ground 1 28 CML-I TD- Transmitter Inverted Data Input 29 CML-I TD+ Transmitter Non-Inverted Data Input GND Module Ground 30 1 1. Module ground pins GND are isolated from the module case and chassis ground within the module. 2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board. 3. The pins are open within module. 4. Reference Clock is not required. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 9 of 9 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Mechanical Design Diagram White Lever LABEL Figure 5, Mechanical Design Diagram of XFP Ordering information FTM 5 3 X 0 C X 4 0 Wavelength 5: 1550nm Distance 40: 40km Function 3: With CDR Package X: XFP Data rate X0: Multi-rate (Optimized for 10GE) Receptacle C: LC Part No. G G: RoHS Compliance Temperature S: Standard Temp (0~+70°C) E: Extended Temp (-40~+70°C) (For standard temperature, this bit can be omitted.) Product Description FTM-53X0C-X40G 1550nm EML Laser, multi-rate for 10GE, 40km, XFP, 0~+70°C, RoHS compliance FTM-53X0C-X40EG 1550nm EML Laser, multi-rate for 10GE, 40km, XFP, -40~+70°C, RoHS compliance Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 10 of 10 Last printed 2006-07-13 13:45 10Gbps XFP Transceiver Up to 40 km transmission Preliminary Data Sheet Jun. 16, 2006 Related Documents ■ INF-8077i (10 Gigabit Small Form Factor Pluggable Module), Revision 4.0 Obtaining Document You can visit our website: http://www.fiberxon.com Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Revision History Revision Initiate Review Approve Subject Rev. 1a Andy.Xiao Jashon.Wang Alain.Shang Initial datasheet Rev. 1b Andy.Xiao Jashon.Wang Alain.Shang Update the Release Date Mar. 28, 2006 power supply Jun. 16, 2006 current © Copyright Fiberxon Inc. 2006 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN ”AS IS” BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Page 11 of 11 Last printed 2006-07-13 13:45