FSAN High Power Triplexer OTP-345V1-PE-1250-SCA-SD Features • Low Cost 1310nm FP Laser Design, 1490nm Digital Receiver and 1555nm Analog Receiver • High Isolation • Multiple TIA Version for 155, 622, 1250Mb/s Applications • 1 GHz Video Receiver Bandwidth • Compliant to FSAN Class B ITU-T G.983.3 Specification Absolute Maximum Ratings Parameter Min Typical Max Unit Operating Temperature (case) -40 - 85 ºC Storage Temperature -40 - 85 ºC Module Characteristics Note 1 Parameter Min Typical Max Unit 30 - - dB 30 - - dB 1310nm Tx to 1490nm Rx Crosstalk - - -47 dB 1310nm Tx to 1550nm Rx Crosstalk - - -47 dB Back Reflection @ 1310nm - - -6 dB Back Reflection @ 1555nm - - -32 dB Back Reflection @ 1490nm - - -20 dB 1555nm Video to 1490nm Rx Isolation (a) 1490nm data to 1555nm Video Rx Isolation (b) Note 1) All data is specified at EOL and across the operating temperature range. (a) 1550nm to 1560nm isolation at digital receiver (b) 1480nm to 1500nm isolation at video receiver Transmitter Characteristics Note 1 Parameter Symbol Min Typical Max Unit λ 1260 - 1360 nm Spectral Width ∆λ - 2 5 nm Typical 1/2 Ppeak set point @25ºC Pset -1 0 1 dBm Tracking Error TE -2 - 2 dB 1/2 Ppeak Over Temperature 1/2Ppeak -3 - 3 dBm Bias Current (=Ith+1/2Imod) Ibias, EOL - - 100 mA Ith 2 - 60 mA Wavelength Threshold Current Modulation Current @ Pset (c) Imod - - 80 mA IPD,mon 50 - 1500 µA Forward Voltage Vf - 1.2 1.6 Volts Rise/Fall Time (d) tr/tf - - 0.5 ns ID - - 1 µA CPD - 10 15 pF PD Monitor Current @ Pset PD Monitor Dark Current PD Capacitance (e) Note 1) All data is specified at EOL and across the operating temperature range. (c) greater modulation current can be used to increase output power (d) 10% to 90% (e) Vr = 10V LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 1 LUMNDS846-JUN2805 rev. A.0 FSAN High Power Triplexer OTP-345V1-PE-1250-SCA-SD Digital Receiver Characteristics Parameter Symbol Min Detection Wavelength λ Gain, Differential (a) G Sensitivity (b) Typical Max Unit 1480 - 1500 nm 1.92 2.5 3.4 V/mW Sen. - -24 -22 dBm Optical Input Overload (b) Pin -3 - - dBm Supply Voltage VCC 3.14 3.3 3.47 V Supply Current (No load) ICC - 26 50 mA MHz High Frequency -3 dB point Single-ended Output Voltage (p-p) (c) f-3dB 700 920 1100 Vo(se)(p-p) 185 250 415 mV Ro(se) 48 50 52 Ohm - - 300 ps Single-ended Output Resistance (d) Rise/Fall Time (e) (a) AC coupled; RL=50ohm BER<[email protected], PRBS 27-1 Er=10dB (c) AC coupled; RL=50ohm; Input current = 100µA(p-p) (d) DC Test (e) 10% to 90% (b) Analog Receiver Characteristics Parameter Detection Wavelength Responsivity at Vr =5V, λ=1550nm Symbol Min Typical Max Unit λ 1550 1555 1560 nm R 0.8 0.85 - mA/mW BW 1 - - GHz Dark Current at Vr=5V Id - 2 50 nA Capacitance at Vr =5V and 1MHz C - 0.6 1.5 pF DSO - -70 - dBc DTB - -80 - dBc Bandwidth LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 2 LUMNDS846-JUN2805 rev. A.0 FSAN High Power Triplexer OTP-345V1-PE-1250-SCA-SD Outline Drawing Units in mm. Pin Assignment PIN-TIA Pin Assignment LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 3 LUMNDS846-JUN2805 rev. A.0 FSAN High Power Triplexer OTP-345V1-PE-1250-SCA-SD Ordering Information Available Options: OTP-345V1-PE-1250-SCA-SD M in. OTP - 345V 1 - Half Peak Output Pow er - • PX PA A = -16 to -13dBm PA = -13 to -9 dBm PB = -9 to -6 dBm PC = -6 to -3 dBm PD = -3 to -1 dBm PE = -1 to +1 dBm PF = +1 to +3 dBm • Blank = Pigtail RL = Receptacle LC RS = Receptacle SC - Connector Digital TIA - Connector Type - Temperature Range Design Specific • Blank = No TIA 155 622 1250 • SCX LCX FCX STX X = A (angled) X = U (ultra) • Blank = industrial C = Commercial (0 to 70) R = Reduced industrial (-20 to 85) • SD : Stanard products. Warnings: Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notes: IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. © LuminentOIC, Inc. 2005 All rights reserved LUMINENTOIC.COM 20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486 9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213 4 LUMNDS846-JUN2805 rev. A.0