Double Balanced Mixer Model MM9xMS Model MM9xMS-14 RF 1.5 to 19.0 GHz Multi-Octave Band Electrical Specifications: (1) Conditions Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1-dB Compression Point: RF (GHz) 2.0-18.0 2.0-18.0 1.5-19.0 1.5-19.0 1.5-19.0 LO (GHz) 2.0-18.0 2.0-18.0 1.5-19.0 Specifications IF (MHz) 2.0-5.0 0.5-6.5 0.5-6.5 1.5-4.0 4.0-19.0 1.5-19.0 1.5-19.0 0.5-6.5 0.5-6.5 Input Third Order Intercept Point: 1.5-19.0 1.5-19.0 0.5-.6.5 LO Power: (4) 1.5-19.0 1.5-19.0 0.5-6.5 Min Typical 6.8 dB 7.8 dB 8.0 dB Max 9.0 dB 11.0 dB 11.5 dB 17 dB 20 dB 20 dB 23 dB 31 dB 25 dB 27 dB 20 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 MM94 MM96 MM97 MM98 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xMS Outline: MS3AL MM9xMS-14 Outline: MS3BL Model MM9xMS Model MM9xMS-14 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Typical Performance at 25˚C All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 Rev. 4/24/08 www.SpectrumMicrowave.com Spectrum Microwave (Europe) · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001