SSC 1N4761

1N4728 thru 1N4764
Zener Diodes
PRODUCT SUMMARY
VZ Range: 3.3 to 100 Volts
Power Dissipation: 1.0 W
FEATURES
Silicon Planar Power Zener Diodes.
For use in stabilizing and clipping circuits with high power
rating.
Standard Zener voltage tolerance is ±10%. Add suffix "A" for
±5% tolerance. Other Zener voltages and tolerances are
available upon request.
These diodes are also available in the MELF case with type
designation 1N4728 thru 1N4764
For bidirectional product, contact local Technical Sales office.
Note:
Suffix: “-P” to order Molded Plastic Package
Suffix: “-G” to order Molded Glass Package
MECHANICAL DATA
Case: DO-41 Glass or DO-41 Plastic Case
Weight: approx. 0.35g
Pb-free; RoHS-compliant
MAXIMUM RATINGS AND THERMAL CHARACTERISTICS
o
(Ratings at 25 C ambient temperature unless otherwise specified.)
Parameter
Symbol
Zener current
Power dissipation at Tamb=50oC
Thermal resistance junction to ambient air
Junction temperature
Storage temperature range
Notes:
Value
Unit
See Next Page
Ptot
RθJA
Tj
TS
1.0
(1)
170
(1)
W
o
C/W
175
o
C
-65 to +175
o
C
1. Valid provided that electrodes at a distance of 10mm from case are kept at ambient temperature.
02/15/2008 Rev.1.00
www.SiliconStandard.com
1
1N4728 thru 1N4764
ELECTRICAL CHARACTERISTICS
(TA=25oC unless otherwise noted) Maximum VF=1.2V at IF=200mA
Test
current
Maximum reverse
leakage current
Surge
current
Maximum
regulator
current (2)
at
TA=50oC
IZM (mA)
Type
number
Nominal
z en er
voltage (3)
at IZT
VZ (Volts)
1N4728
3.3
76
10
400
1.0
100
1
1380
276
1N4729
3.6
69
10
400
1.0
100
1
1260
252
IZT (mA)
Maximum z ener impedance
ZZT
at IZT
(Ω
Ω)
ZZK
(Ω
Ω)
(1)
at
IZK
(mA)
IR (uA)
at V R
(Volts)
at
TA=25oC
IR (mA)
1N4730
3.9
64
9
400
1.0
50
1
1190
234
1N4731
4.3
58
9
400
1.0
10
1
1070
217
1N4732
4.7
53
8
500
1.0
10
1
970
193
1N4733
5.1
49
7
550
1.0
10
1
890
178
1N4734
5.6
45
5
600
1.0
10
2
810
162
1N4735
6.2
41
2
700
1.0
10
3
730
146
1N4736
6.8
37
3.5
700
1.0
10
4
660
133
1N4737
7.5
34
4.0
700
0.5
10
5
605
121
1N4738
8.2
31
4.5
700
0.5
10
6
550
110
1N4739
9.1
28
5.0
700
0.5
10
7
500
100
1N4740
10
25
7
700
0.25
10
7.6
454
91
1N4741
11
23
8
700
0.25
5
8.4
414
83
1N4742
12
21
9
700
0.25
5
9.1
380
76
1N4743
13
19
10
700
0.25
5
9.9
344
69
1N4744
15
17
14
700
0.25
5
11.4
304
61
1N4745
16
15.5
16
700
0.25
5
12.2
285
57
1N4746
18
14
20
750
0.25
5
13.7
250
50
1N4747
20
12.5
22
750
0.25
5
15.2
225
45
1N4748
22
11.5
23
750
0.25
5
16.7
205
41
1N4749
24
10.5
25
750
0.25
5
18.2
190
38
1N4750
27
9.5
35
750
0.25
5
20.6
170
34
1N4751
30
8.5
40
1000
0.25
5
22.8
150
30
1N4752
33
7.5
45
1000
0.25
5
25.1
135
27
1N4753
36
7.0
50
1000
0.25
5
27.4
125
25
1N4754
39
6.5
60
1000
0.25
5
29.7
115
23
1N4755
43
6.0
70
1500
0.25
5
32.7
110
22
1N4756
47
5.5
80
1500
0.25
5
35.8
95
19
1N4757
51
5.0
95
1500
0.25
5
38.8
90
18
1N4758
56
4.5
110
2000
0.25
5
42.6
80
16
1N4759
62
4.0
125
2000
0.25
5
47.1
70
14
1N4760
68
3.7
150
2000
0.25
5
51.7
65
13
1N4761
75
3.3
175
2000
0.25
5
56.0
60
12
1N4762
82
3.0
200
3000
0.25
5
62.2
55
11
1N4763
91
2.8
250
3000
0.25
5
69.2
50
10
1N4764
100
2.5
350
3000
0.25
5
76.0
45
9
Notes:
1. The Zener impedance is derived from the 1KHZ AC voltage which results when an AC current having an RMS value equal to 10% of the Zener current
(IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate
unstable units
2. Valid provided that electrodes at a distance of 10 mm from case are kept at ambient temperature
3. Measured under thermal equilibrium and DC test conditions
02/15/2008 Rev.1.00
www.SiliconStandard.com
2
1N4728 thru 1N4764
RATINGS AND CHARACTERISTIC CURVES
o
(TA=25 C unless otherwise noted)
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
02/15/2008 Rev.1.00
www.SiliconStandard.com
3