SSC SS6734

SS6734G
300mA Low Dropout Linear Regulator
FEATURES
DESCRIPTION
Low dropout voltage of 470mV at an output
current of 300mA (3.0V output version).
The SS6734G is a 3-pin low-dropout linear
Guaranteed 300mA output current.
include zero base current loss, very low drop-
Low ground current of 55µA.
out voltage, and output voltage accuracy of 2%.
Output voltage accuracy of 2% at 1.8V/ 2.0V /2.5V
/2.7V/ 3.0V/ 3.3V/ 3.5V/ 3.7V/ 3.8V/ 5.0V/5.2V
Typical ground current remains approximately
Only needs 1µF output capacitor for stability.
Dropout voltage at an output current of 300mA
Current and thermal limiting.
is exceptionally low. Built-in output current
regulator with superior characteristics, which
55µA, for loads ranging from zero to maximum.
limiting and thermal limiting provide maximum
Pb-free, RoHS compliant.
protection against fault conditions.
APPLICATIONS
The SS6734G is available in RoHS-compliant
CD-ROM Drivers.
SOT-23-3, SOT-89, and TO-92 packages.
LAN Cards.
Microprocessors.
DRAM Modules.
Wireless Communication Systems.
Battery Powered Systems.
TYPICAL APPLICATION CIRCUIT
VOUT
VIN
SS6734G
VIN
+
1µF
CIN
GND
VOUT
+
1µF
COUT
Low Dropout Linear Regulator
(CIN and COUT should be electrolytic capacitors)
1/15/2005 Rev.2.10
www.SiliconStandard.com
1 of 9
SS6734G
ORDERING INFORMATION
PIN CONFIGURATION
SS6734-XXGXX XX
Packing:
TR: Tape and reel
1: GND
2: VOUT
3: VIN
Package type:
U: SOT-23-3
XA: SOT-89
XT: SOT-89
ZT: TO-92
ZL: TO-92
1
G: Pb-free, RoHS compliant.
TO-92 (GZT)
TOP VIEW
1: GND
2. VIN
3. VOUT
SS6734-18GXATR
1.8V version, in RoHS-compliant
SOT-89 package, shipped
on tape and reel.
2
SOT-89 (GXA)
TOP VIEW
1: GND
2. VIN
3. VOUT
SOT-89 (GXT)
TOP VIEW
1: VOUT
2. GND
3. VIN
Output voltage:
v
18: 1.8V
20: 2.0V
25: 2.5V
27: 2.7V
30: 3.0V
33: 3.3V
35: 3.5V
37: 3.7V
38: 3.8V
50: 5.0V
52: 5.2V
Example:
3
SOT-23 (GU)
TO-92 (GZL)
TOP VIEW
1: VIN
2. GND
3. VOUT
1
2
3
1
2
3
1
2
3
1
2
3
SOT-23 MARKING
Part No.
GU
SS6734-18GU
CD18P
SS6734-35GU
CD35P
SS6734-20GU
CD20P
SS6734-37GU
CD37P
SS6734-25GU
CD25P
SS6734-38GU
CD38P
SS6734-27GU
CD27P
SS6734-50GU
CD50P
SS6734-30GU
CD30P
SS6734-52GU
CD52P
SS6734-33GU
CD33P
1/15/2005 Rev.2.10
Part No.
GU
www.SiliconStandard.com
2 of 9
SS6734G
SOT-89 MARKING
Part No.
GXA
Part No.
GXT
SS6734-18GXA
CA18P
SS6734-18GXT
CB18P
SS6734-20GXA
CA20P
SS6734-20GXT
CB20P
SS6734-25GXA
CA25P
SS6734-25GXT
CB25P
SS6734-27GXA
CA27P
SS6734-27GXT
CB27P
SS6734-30GXA
CA30P
SS6734-30GXT
CB30P
SS6734-33GXA
CA33P
SS6734-33GXT
CB33P
SS6734-35GXA
CA35P
SS6734-35GXT
CB35P
SS6734-37GXA
CA37P
SS6734-37GXT
CB37P
SS6734-38GXA
CA38P
SS6734-38GXT
CB38P
SS6734-50GXA
CA50P
SS6734-50GXT
CB50P
SS6734-52GXA
CA52P
SS6734-52GXT
CB52P
ABSOLUTE MAXIMUM RATINGS
Input Supply Voltage
-0.3 ~12V
Operating Temperature Range
-40°C~ 85°C
Storage Temperature Range
Maximum Junction Temperature
-65°C~150°C
125°C
Lead Temperature (Soldering) 10 sec.
260°C
Thermal Resistance Junction to Ambient
SOT-89 Package
160°C/W
(Assumes no ambient airflow, no heatsink)
TO-92 Package
150°C/W
SOT-23 Package
180°C/W
Absolute Maximum Ratings are those values beyond which the life of a device may be impaired.
TEST CIRCUIT
Refer to the TYPICAL APPLICATION CIRCUIT
1/15/2005 Rev.2.10
www.SiliconStandard.com
3 of 9
SS6734G
ELECTRICAL CHARACTERISTICS
PARAMETER
TEST CONDITIONS
Output Voltage
No Load
SS6734-52
SS6734-50
SS6734-38
SS6734-37
SS6734-35
SS6734-33
SS6734-30
SS6734-27
SS6734-25
SS6734-20
SS6734-18
Output Voltage
Temperature Coefficient
(Note 2)
Line Regulation
Load Regulation
(Note 3)
Current Limit
(Note 4)
Ground Current
IO=0.1mA~IMAX
1.4V≤VOUT≤3.9V
4.0V≤VOUT≤5.2V
1/15/2005 Rev.2.10
MIN.
TYP.
MAX.
UNIT
5.100
4.900
3.725
3.625
3.430
3.235
2.940
2.646
2.450
1.960
1.764
5.200
5.000
3.800
3.700
3.500
3.300
3.000
2.700
2.500
2.000
1.800
5.300
5.100
3.875
3.775
3.570
3.365
3.060
2.754
2.550
2.040
1.836
V
50
PPM/°C
VIN=4V~12V
VIN=5.5V~12V
3
3
10
10
mV
VIN=5V
VIN=7V
7
15
20
40
mV
VIN=7V, VOUT=0V
IL=300mA
Note 2:
Note 3:
Note 4:
Note 5:
VIN=5.5~12V
VIN=5.5~12V
VIN=4.1~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
VIN=4.0~12V
IL=1mA,
1.4V≤VOUT≤3.2V
3.3V≤VOUT≤5.2V
IL=0.1~300mA
1.4V≤VOUT≤3.9V
4.0V≤VOUT≤5.2V
Dropout Voltage
(Note 5)
Note 1:
(TA=25°C, CIN=1µF, COUT=1µF, unless otherwise
specified.) (Note1 )
300
4.0V≤VOUT≤5.2V
3.0V≤VOUT≤3.9V
2.5V≤VOUT≤2.9V
2.0V≤VOUT≤2.4V
1.4V≤VOUT≤1.9V
VIN=5~12V
VIN=7~12V
mA
400
470
570
800
1260
55
55
mV
80
80
µA
Specifications are guaranteed by Statistical Quality Control (SQC), not by 100% production
testing, over the operating temperature range from -40°C to 85°C.
Guaranteed by design.
Regulation is measured at constant junction temperature, using pulse testing with a low ON time.
Current limit is measured by pulsing a short time.
Dropout voltage is defined as the input to output differential at which the output voltage drops
100mV below the value of the output voltage measured with a 1V differential.
www.SiliconStandard.com
4 of 9
SS6734G
TYPICAL PERFORMANCE CHARACTERISTICS
5.40
3.50
SS6734-52
5.30
3.40
5.25
3.35
5.20
5.15
3.30
3.25
5.10
3.20
5.05
3.15
5.00
-50
-30
SS6734-33
3.45
V OUT (V)
V OUT (V)
5.35
-10
10
30
50
70
3.10
-50
90
-30
-10
Temperature (°C)
Fig. 1
Fig. 2
VOUT vs. Temperature
Ground Current (µA)
Ground Current (µA)
ILOAD=300mA
46
44
42
ILOAD=100mA
40
70
90
VOUT vs. Temperature
ILOAD=300mA
46
44
42
ILOAD=100mA
40
ILOAD= 0mA
38
-40 -30 -20 -10
0
ILOAD= 0mA
38
-40 -30 -20 -10
10 20 30 40 50 60 70 80 90
Fig. 3
0
10 20 30 40 50 60 70 80 90
Temperature (°C)
Temperature (°C)
Ground Current vs. Temperature
Fig. 4
60
Ground Current vs. Temperature
60
SS6734-33
SS6734-52
50
Ground Current (µA)
Ground Current (µA)
50
SS6734-33
SS6734-52
40
30
20
10
0
30
48
50
48
10
Temperature (°C)
50
40
30
20
10
0
1
2
3
4
5
6
7
8
9
10
11
12
0
0
1
2
VIN (V)
Fig. 5
1/15/2005 Rev.2.10
3
4
5
6
7
8
9
10
11
12
VIN (V)
Ground Current vs. VIN
Fig. 6
www.SiliconStandard.com
Ground Current vs. VIN
5 of 9
SS6734G
TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
600
500
450
SS6734-52
SS6734-33
T= 80°C
350
VDROP (mV)
400
VDROP (mV)
T= 80°C
500
T= 50°C
300
250
T= 20°C
200
T=-40°C
150
T= 50°C
400
300
T= 20°C
200
T=-40°C
100
100
50
00
0
50
100
150
200
250
300
350
400
0
50
100
Fig. 7
VDROP vs. ILOAD
150
200
250
300
350
400
ILOAD (mA)
ILOAD (mA)
Fig. 8
VDROP vs. ILOAD
500
490
SS6734
Crrent Limit (mA)
480
VIN = 8V
470
VIN = 7V
460
450
440
430
VIN = 6V
420
410
400
-40
VIN = 5V
-20
0
20
40
60
80
Temperature (°C)
Fig. 9
1/15/2005 Rev.2.10
Current Limit vs. Temperature
www.SiliconStandard.com
6 of 9
SS6734G
BLOCK DIAGRAM
VIN
VOUT
CURRENT
LIMITING
ERROR
AMP
+
-
+
THERMAL
SHUTDOWN
1.235V
Reference
GND
PIN DESCRIPTIONS
VOUT PIN - Output pin.
GND PIN - Power GND.
VIN PIN
1/15/2005 Rev.2.10
- Power Supply Input.
www.SiliconStandard.com
7 of 9
SS6734G
PHYSICAL DIMENSIONS
(unit: mm)
All package options are Pb-free, RoHS compliant.
SOT-23 (GU)
D
0.25
E1
E
c
L
e
θ
L1
e1
A2
A
A1
b
SYMBOL
MIN
MAX
A
0.95
1.45
A1
0.05
0.15
A2
0.90
1.30
b
0.30
0.50
c
0.08
0.22
D
2.80
3.00
E
2.60
3.00
E1
1.50
1.70
e
0.95 BSC
e1
1.90 BSC
L
0.30
L1
0.60
0.60 REF
θ
0˚
8˚
SOT-89 (GXX)
D
A
SYMBOL
MIN
MAX
C
A
1.40
1.60
B
0.44
0.56
B1
0.36
0.48
C
0.35
0.44
D
4.40
4.60
D1
1.50
1.83
E
2.29
2.60
D1
H
E
L
B
e
e1
1/15/2005 Rev.2.10
B1
e
1.50 BSC
e1
3.00 BSC
H
3.94
4.25
L
0.89
1.20
www.SiliconStandard.com
8 of 9
SS6734G
TO-92 (GZX)
SYMBOL
MIN
MAX
A
4.32
5.33
b
0.36
0.47
D
4.45
5.20
E
3.18
4.19
e
2.42
2.66
e1
1.15
1.39
j
3.43
-
L
12.70
-
S
2.03
2.66
A
D
b
S
E
L
j
e1
e
Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no
guarantee or warranty, express or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no
responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its
use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including
without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to
the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of
Silicon Standard Corporation or any third parties.
1/15/2005 Rev.2.10
www.SiliconStandard.com
9 of 9