SSDI SDR1D

SDR1D thru SDR1N
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
1.0 AMPS
200 ─ 1200 VOLTS
50 – 80 nsec ULTRA FAST RECTIFIER
Designer’s Data Sheet
Part Number/Ordering Information 1/
SDR1 __ __ __
│ │ └ Screening 2/
│ │
__ = Not Screened
│ │
TX = TX Level
│ │
TXV = TXV
│ │
S = S Level
│ │
│ └ Package Type
__ = Axial Leaded
│
│
D = 200V
K = 800V
└ Family
G = 400V
M = 1000V
J = 600V
N = 1200V
FEATURES:
50-80 ns Max @ 25°C 4/
80-130 ns Max @ 100°C 4/
•
Ultra Fast Recovery:
•
•
•
•
•
•
•
•
Single Chip Construction
PIV to 1200 Volts
Low Reverse Leakage Current
Hermetically Sealed
For High Efficiency Applications
Metallurgically Bonded
TX, TXV, and S-Level Screening Available
Available in Surface Mount (SM) and Square Tab
Surface Mount (SMS) Versions (Ref. RU0003)
Hyper Fast Version available (Ref. RH0119)
•
MAXIMUM RATINGS 3/
RATING
SDR1D
SDR1G
SDR1J
SDR1K
SDR1M
SDR1N
Peak Repetitive Reverse
Voltage
And
DC Blocking Voltage
Rectified Forward Forward Current
(Resistive Load, 60 Hz, Sine Wave, TA = 25°C)
Peak Surge Current
(8.3 msec Pulse, Half Sine Wave Superimposed on Io, allow junction to reach
equilibrium between pulses, TA = 25°C)
Operating & Storage Temperature
Thermal Resistance, Junction to Lead, L = 3/8”
SYMBOL
VALUE
UNIT
VRRM
VRWM
VR
200
400
600
800
1000
1200
Volts
IO
1
Amp
IFSM
25
Amps
TOP and TSTG
RθJL
-65 to +175
°C
°C/W
35
Axial Leaded
NOTES:
1/ For Ordering Information, Price, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RU0005F
DOC
SDR1D
thru
SDR1N
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
ELECTRICAL CHARACTERISTICS
3/
CHARACTERISTICS
SYMBOL VALUE
UNIT
Instantaneous Forward Voltage Drop
(IF = 1Adc, 300- 500 μs Pulse, TA = 25°C)
SDR1D thru SDR1J
SDR1K thru SDR1N
VF1
1.70
1.90
Vdc
Instantaneous Forward Voltage Drop
(IF = 1Adc, 300- 500 μs Pulse, TA = -55°C)
SDR1D thru SDR1J
SDR1K thru SDR1N
VF2
2.10
2.30
Vdc
Maximum Reverse Leakage Current
(Rated VR, 300 μs Pulse Minimum , TA = 25°C)
IR1
5
μA
Maximum Reverse Leakage Current
(Rated VR, 300 μs Pulse Minimum , TA = 100°C)
IR2
500
μA
Junction Capacitance
(VR = 10Vdc, TA = 25°C , f = 1MHz)
CJ
24
pf
trr
50
60
70
80
ns
Maximum Reverse Recovery Time 4/
Axial Leaded Case Outline 5/:
SDR1D thru SDR1J
SDR1K
SDR1M
SDR1N
DIM.
A
B
C
D
DIMENSIONS
MIN.
----.027”
.95”
MAX.
.150”
.190”
.033”
---
NOTES:
1/ For Ordering Information, Price, and Availability- Contact Factory.
2/ Screened to MIL-PRF-19500.
4/ Recovery Conditions: IF = 0.5 Amp, IR = 1.0 Amp, IRR to .25 Amp.
5/ For information on operating curves, contact factory.
3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RU0005F
DOC