SFT3019 SERIES SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 1A 80 VOLTS NPN HIGH SPEED TRANSISTOR DESIGNER'S DATA SHEET Part Number /Ordering Information 1/ SFT3019 -4 TX Screening 2/: _ = Not Screened TX = TX Level TXV = TXV Level S = Space Level 3/ Package: -4 = LCC4 /18 = TO-18 FEATURES • BVCEO 80V min. • Fast Switching • High Frequency • High Linear Gain, Low Saturation Voltage. • Replaces 2N3019 type • TX, TXV, and S Level Available MAXIMUM RATINGS SYMBOL VALUE UNITS Collector-Base Voltage V CBO 140 Volts Collector-Emitter Voltage VCEO 80 Volts Emitter-Base Voltage V EBO 7.0 Volts IC 1 Amp TJ, TSTG -65 to +175 PD 5.0 28.6 Continuous Collector Current Operating and Storage Temperature Total Device Dissipation @ TC # 25oC Derate above 25oC LCC-4 (-4) Available Part Numbers: TO-18 (/18) SFT3019-4 SFT3019/18 PIN ASSIGNMENT Code Function Collector Emitter Base -4 Normal Pin 1 Pin 2 Pin 3 /18 Normal Pin 1 Pin 2 Pin 3 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. 1 3 2 DATA SHEET #: TR0024A o C W mW/oC SFT3019 SERIES SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 4/ SYMBOL MIN MAX UNITS Collector-Emitter Breakdown Voltage * (IC = 30mA) BVCEO 80 - VDC Collector-Base Sustaining Voltage * (IC = 100µADC) BVCBO 140 - VDC Emitter-Base Sustaining Voltage * (IE = 100µADC) BVEBO 7 - VDC I EBO - 10 nADC I CBO - 10 10 nADC µ ADC HFE 50 90 100 50 15 40 300 - VCE(SAT) - 0.2 0.5 VDC VBE(SAT) - 1.1 VDC hfe 5 80 400 Input Capacitance (VBE = 0.5V, IC = 0, f = 1MHz) Cib - 60 pF Output Capacitance (VCB = 10V, IE = 0, f = 1MHz) Cob - 8 pF r b * rc - 400 psec NF - 4 db Emitter Current (VBE = 5VDC ) TC = 25oC TC = 150oC Collector Cutoff Current (VCB = 90VDC) IC = 0.1mADC, TC = 25oC IC = 10mADC, TC = 25oC IC = 150mADC, TC = 25oC IC = 500mADC, TC = 25oC IC = 1.0ADC, TC = 25oC IC = 150mADC, TC = -55oC DC Current Gain* (VCE = 10VDC) Collector-Emitter Saturation Voltage * IC = 150mADC, IB = 15mADC IC = 500mADC, IB = 50mADC Base-Emitter Saturation Voltage * (IC = 150mADC, IB = 15mADC) AC Current Gain IC = 50mA, VCE = 10V, f = 20MHz IC = 1mA, VCE = 5V, f = 1kHz Collector-Base Time Constant (VCB = 10V, IC = 10mA, f = 4MHz) Noice Figure (VCE = 10VDC , IC = 100µA, Rg = 1kOhms, f = 1MHz) NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Screening per MIL-PRF-19500. 3/ For Package Outlines Contact Factory. 4/ TC = 25oC, Unless Otherwise Specified. * Pulse Test: Pulse Width = 300us, Duty Cycle = 2% Package Outline Part Number Document SFT2907A-4 60-0149-323 SFT2907A/18 60-0149-018