Suntan ® M1 THRU M7 SURFACE MOUNT GENERAL RECTIFIER Reverse Voltage -50 to 1000 Volts Forward Current -1.0 Ampere FEATU R E S ‧ The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 ‧ For surface mounted applications ‧ Low reverse leakage ‧ Built-in strain relief, ideal for automated placement 0.111(2.83) 0.100(2.54) 0.078(2.00) 0.063(1.60) ‧ High forward surge current capability ‧ High temperature soldering guaranteed: 0.178(4.53) 0.157(3.99) 250℃/10 seconds at terminals MECHANICAL DATA 0.012(0.305) 0.006(0.152) Case : JEDEC DO-214AC molded plastic body 0.096(2.45) 0.078(1.98) Terminals : Solder plated solderable per MIL-STD-750, Method 2026 0.060(1.52) 0.030(0.76) Polarity : Color band denotes cathode end 0.008(0.203)MAX 0.224(5.69) 0.194(4.93) Mounting Position : Any Dimensions in inches and (millimeters) Weight : 0.003 ounce 0.093 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Raings at 25℃ ambient temperature unless otherwise specified Single phase half-wave 60HZ resistive or inductive load ,for capacitive load current derate by 20% SYMBOLS M1 M2 M3 M4 M5 M6 M7 UNITS Maximum repetitive peak reverse voltage Maximum RMS voltage VRRM VRMS 50 35 100 70 200 140 400 280 600 420 800 560 1000 700 VOLTS VOLTS Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 VOLTS Maximum average forward rectified current at TL=110℃ I (AV) 1.0 AMP Peak forward surge current 8.3ms single Half sine-wave superimposed on rated toad (JEDEC Method) IFSM 30.0 AMPS Maximum instantaneous forward voltage at 1.0A VF 1.1 VOLTS Maximum DC reverse current TA=25℃ at rated DC blocking voltage TA=100℃ IR 5.0 50.0 μA Typical junction capacitance (NOTE 1) CJ Typical thermal resistance (NOTE 2) RqJA Operating junction and storage temperature range TJ, TSTG Note :1. Measured at 1 MHZ and applied reverse voltage of 4.0V D.C 2. P.C.B mounted with 0.2x0.2＂(5.0x5.0mm) copper pad areas Suntan® Technology Company Limited Website: www.suntan.com.hk 15.0 pF 75.0 -65 to +175 ℃/W ℃ Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246 Suntan ® RATINGS AND CHARACTERISTIC CURVES M1 THRU M7 Note: Specification are subject to change without notice. For more detail and update, please visit our website. Suntan® Technology Company Limited Website: www.suntan.com.hk Email: [email protected] Tel: (852) 8202 8782 Fax: (852) 8208 6246