200 Series Intelligent Low Profile Plug-in Detectors The System Sensor 200 Series intelligent plug-in smoke detectors with integral communication provide point location for alarm communication and selective maintenance. Features •Sleek, low-profile design •Analog communications •Low standby current •Rotary address switches •Superior EMI protection •Dual LEDs for 360° visibility Detector sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the panel. Point ID capability allows each detector address to be set with decade address switches to provide exact detector locations for selective maintenance when chamber contamination reaches an unacceptable level. The System Sensor 2251B photoelectric detector’s unique optical sensing chamber is engineered to sense smoke produced by a wide range of combustion sources. Dual electronic thermistors add 135°F fixed temperature thermal sensing on the 2251TB model. The Acclimate ™ 2251TMB photoelectric detector includes thermal detection at 135 (degree sign)F. It uses advanced on-board software to combine the signals from the photo and thermal elements to create a true multicriteria detector. It is capable of rejecting nuisance sources, but still responds quickly to real fires. The Acclimate multicriteria detector has the capability of adjusting its sensitivity according to its environment. The 1251B ionization detector incorporates a unique single source, dual chamber design to respond quickly and dependably to a broad range of fires. Agency Listings Both the 5251B and 5251RB detectors use an innovative thermistor sensing circuit to produce 135°F fixed and rate-of-rise thermal detection in a low profile package. The 5251H model provides fixed high temperature detection at 190ºF. These thermal detectors provide cost effective, intelligent property protection in a variety of applications. 200 Series Intelligent Detector Specifications Physical/Operating Specifications Height Diameter Shipping Weight Operating Temperature Range UL Listed Velocity Range Operating Humidity Range Thermal Ratings Electrical Specifications Voltage Range Standby Current (max. avg.) LED Current (max.) 2.0 in (51 mm) 6.1 in (155 mm) installed in B210LP base; 4.1 in (104 mm) installed in B501 base Heat: 4.8 oz (136 g); Photo/Photo with Heat: 5.2 oz (147 g); Ion: 5.4 oz (153 g) Ion/Photo: 32°F to 120°F (0°C to 49°C) Photo with Thermal: 32°F to 100°F (0°C to 38°C) Thermal: –4°F to 100°F (–20°C to 38°C) High Temperature: –4°F to 150°F (–20°C to 66°C) Ion: 0 to 1200 fpm (0 to 6.1 m/sec) Photo/Photo with Thermal: 0 – 4000 fpm (0 – 20 m/sec) (suitable for installation in ducts) 10% to 93% noncondensing Fixed Temperature Setpoint: 135°F (57°C) Rate of Rise Detection: 15°F/min. (8.3°C/min.) High Temperature Heat: 190ºF (88ºC) 15 to 32 volts DC peak 300 µA @ 24VDC (one communication every 5 seconds with LED enabled) Photo/Photo with Thermal: 300 µA @ 24 VDC (one communication every 5 seconds with LED enabled) 6.5 mA @ 24 VDC (on) Ordering Information Part No. 2251B* 2251TB* 2251TMB* 1251B* 5251B* 5251RB* 5251H* Bases B501* B210LP* B501BH* B501BH-2* B501BHT* B501BHT-2* B224RB* B224BI* RMK400 SMK400 SMB600 Accessories F110 RA400Z M02-04-01 M02-09-00 XR2B XP-4 T55-127-000 BCK-200B WCK-2008 Description Photoelectric smoke detector Photoelectric smoke detector with thermal Acclimate™ multicriteria smoke detector Ionization smoke detector Fixed temperature thermal detector Rate-of-rise thermal detector High temperature thermal detector Flangeless mounting base Flanged mounting base Standard sounder base Standard sounder base; complies with UL864 9th edition Temporal tone sounder base Temporal tone sounder base; complies with UL864 9th edition Relay base Isolator base Recessed mounting kit Flangeless surface mounting kit Flanged surface mounting kit Retrofit flange Remote LED annunciator Detector test magnet Telescoping test magnet Detector removal tool (T55-127-000 included) Extension for XR2 (5 to 15 ft) Detector removal head Black detector kit (10 pack)** White Detector Kit (10 pack)** Accessories RA400Z Remote LED Annunciator Head also sold separately (part no. T55-127-000) XR2B Detector Removal Tool * Add “A” for ULC listed product (e.g., 2251BA) ** The BCK-200B and WCK-200B are only applicable to the B210LP flanged style mounting base and may only be used with 2251B (photoelectric) and 1251B (ionization) smoke detectors. 3825 Ohio Avenue • St. Charles, IL 60174 Phone: 800-SENSOR2 • Fax: 630-377-6495 ©2009 System Sensor. Product specifications subject to change without notice. Visit systemsensor.com for current product information, including the latest version of this data sheet. A05-0362-002 • 3/09 • #2125