TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW IF Filter 473.4MHz (SMD 5×7 mm) TST Parts No.: TB0160A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 6,25 ,2004 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No.3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 473.4MHz (SMD 5×7 mm) MODEL NO.: TB0160A REV. NO.:4 RoHS Compliant Lead free Lead-free soldering A. MAXIMUM RATING: 1.Input Power Level: 10 dBm 2.Operating Temperature: -40°C to 70°C 3.Storage Temperature: -40°C to 70°C B. ELECTRICAL CHARACTERISTICS: Item Unit MHz Min. - Type. 473.4 Max. - dB - 9.7 13 MHz - 28 - Amplitude Ripple (462MHz~483.75MHz) dB - 0.68 1 Group delay ripple (462MHz~483.75MHz) nS - 45 70 Triple transit suppression dB - 40 - 275 to 440 MHz dB 40 55 - 440 to 452.6 MHz dB 45 47 - 498 to 675 MHz dB 40 41 - Center frequency, Fc Insertion Loss, IL Passband width, BW3 Note Attenuation:(Reference level from Min IL) C. MEASUREMENT CIRCUIT: 1) For 50 ohm Unbalanced Input and Output TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 2) For 200 ohm Balanced Input and Output D.FREQUENCY CHRACTERISTICS: (1) wide band of Response: Fig-1 S21 Response Horizontal: 20MHz/Div Vertical: 10dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 (2) Passband of Response: Fig-2 Group Delay and Ripple, Horizontal:4MHz/Div Vertical: 1 dB/Div Vertical: 100nS/Div F.OUTLINE DRAWING: □: Date code Unit: mm Pin C : Unbalanced Input or Balanced Input Pin D : Unbalanced Input Ground or Balanced Input Pin I : Unbalanced Output or Balanced Output Pin J : Unbalanced Output Ground or Balanced Output Pin A, B, E, F, G, H, K, L : To be Ground TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F.PCB FOOTPRINT G. PACKING: 1.REEL DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 2.TAPE DIMENSION TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6