TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com Approval Sheet For Product Specification Issued Date: Product Name: SAW Filter 512.2MHz SMD 7.0×5.0mm TST Parts No.:TB0577A Customer Parts No.: Company: Division: Approved by : Date: Checked by: Andy Lee Approval by: Francis Chen Date: 2007/12/28 TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document FR-71S03-01 TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SAW Filter 512.2 MHz SMD 7.0mmX5.0mm MODEL NO.: TB0577A REV. NO. 1 A. MAXIMUM RATING: RoHS Compliant Lead free Lead-free soldering 1. Operating Temperature: -40°C to +85°C 2. Storage Temperature: -40°C to +85°C 3. Maximum Input Power : 10dBm B. ELECTRICAL CHARACTERISTICS: 1. Ambient Temperature: 25 ° Item Min. Typical Max. MHz - 512.2 - dB - 11.8 13.5 MHz 27.0 30.0 - Amplitude Ripple (Fc ± 11.5 MHz) dB - 0.6 1.0 Group Delay Ripple (Fc ± 11.5 MHz) nS - 30 - 40 36 48 42 - - -93 - Center frequency Fc Insertion loss at Fc Bandwidth at –1.0dB Attenuation (Reference level from minimum Insertion loss ) 300 MHz ~ 487.5MHz 540 MHz ~ 650 MHz Temp Coefficient dB dB ppm/° C TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 D. FREQUENCY CHARACTERISTICS : 1.S21 Response Fig1. Horizontal: 20MHz/Div Vertical: 10dB/Div 2. Passband Ripple Fig2. Horizontal: 5MHz/Div Vertical: 1dB/Div TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 3. Group Delay Ripple Fig3. Horizontal: 5MHz/Div Vertical: 100nS/Div E. MEASUREMENT CIRCUIT 1. Single ended input 50 ohm to Single ended Output 50 ohm : Note: The matching structure will change according to different test fixture. TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 F.OUTLINE DRAWING: Pin J : RF Input Pin D : RF OUtput Pin A,B,C,E,F,G,H,I,K,L : Ground Unit: mm □ : Week Code (Follow the table from planner each year) △ : Product / Year Code Year 2005 2009 2006 2010 2007 2011 2008 2012 Product Code B b B b TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5 G. PCB Footprint Unit: mm H. PACKING: 1. REEL DIMENSION Unit: mm TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 6 2. TAPE DIMENSION Unit: mm 360 340 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 Temp ( Deg C) I. RECOMMENDED REFLOW PROFILE : Time (Sec) TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 7