A M I C R O S E M I LX9501 Input Cable Assembly C O M P A N Y PRODUCTION DATA SHEET 18-inch (457mm) lengths of UL1061 AWG#26 wire. This cable assembly is designed to save users the job of obtaining housing, pin, wire, and crimp-tools in addition to the assembly of an evaluation board. It is also the same cable assembly provided with inverter samples that utilize the Molex* wire-to-board connectors. Used for Interconnection of IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com Backlight Inverter Connector (Molex 53261) to Power, Ground, and Control Signal Generous 18-inch (457mm) Lead Length to accommodate Most Applications Pre-Stripped Ends Facilitate Ease of Hook-up Leads Color-Coded for Quick and Accurate Termination Wire is 300 Volt Rated to 80°C, PVC Insulated and is Stranded in a 7X #34 Configuration W W W . Microsemi . COM The LX9501 is an input-connector cable assembly that is used to connect Linfinity’s standard line of backlight inverter products. The connector housing is interconnectable and compatible with PC boards mounted with the Molex* 53261 series 8-pin SMT header. The housing and pins are crimp-terminated to S t r ip & R e t a i n 0 .1 2 5 in . ±0 .0 2 0 3 .1 7 m m ± 0 .5 0 1 2 3 4 5 6 7 8 1 8 .0 0 0 in . ± 0 .2 5 0 4 5 7 .2 0 m m ± 6 .3 5 Molex* 51021 Series 1 Red 2 Molex* 50079 Series 2 Red 3 UL 1061, 26 AWG, Red Wire 3 Black 4 UL 1061, 26 AWG, Black Wire 4 Black 5 UL 1061, 26 AWG, Orange Wire 5 Orange 6 UL 1061, 26 AWG, Green Wire 6 Green 7 UL 1061, 26 AWG, White Wire 7 White 8 UL 1061, 26 AWG, Violet Wire 8 Violet LX9501 1 * Molex is a Registered Trademark of Molex, Inc. LX9501 Copyright 2000 Rev. 1.2,2000-09-22 Microsemi Linfinity Microelectronics Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570 Page 1