TAI-SAW TECHNOLOGY CO., LTD. No. 3, Industrial 2nd Rd., Ping-Chen Industrial District, Taoyuan, 324, Taiwan, R.O.C. TEL: 886-3-4690038 FAX: 886-3-4697532 E-mail: [email protected] Web: www.taisaw.com SMD 8.2x6.0 VCO MODEL NO.: TV0134A REV. NO.:1.0 Description and Applications: Voltage Control Oscillator, SMD type, 8.2mmx6.0mm. RoHS Compliant Lead-free soldering Conditions: Parameter Symbol min. Limits typ. max. Units Supply Voltage Vcc 2.6 2.8 3.0 V Control Voltage Range Vt 0.5 - 2.5 V Load Impedance - - 50 - Ohm Temperature Range - -30 25 85 ℃ Electrical Specifications: For different applications, the specification change is possible. Please contact TST sales representative or application engineer for your requirement. Limits Parameter Condition Units min. typ. max. Power Consumption 23±3 - - - 10 mA Operation Frequency Range 23±3 983 - 1083 MHz Operation Frequency Range 23+-3 1038 MHz Control Voltage Sensitivity Output Level C/N 23±3 23±3 23±3 Pushing Figure 23±3 Pulling Figure 23±3 Vcc=2.8V Vt=1.5V 100 KHz offset Vcc=2.8+-0.2V, ref Vcc=2.8V VSWR=2.0 for all phase, ref:50Ohm Harmonics (2fo, 3fo) Harmonics (11fo) 23±3 23±3 Temperature Stability 23±3 -30~+85 deg.C Ref. 25 deg.C 1028 65 -16 105 75 -13 - 90 -10 - MHz/V dBm dBc/Hz -1.0 - +1.0 MHz -1.0 - +1.0 MHz - - -20 -75 dBc dBc -5.0 - +5.0 MHz TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 2 Mechanical Dimensions (mm): A=8.2 B=6.0 C=1.6 D=6.4 E=4.2 F=2.4 G=5.5 H=1.1 I=1.5 Pin #1= RF OUT Pin #2= Vcc Pin #3= Vcont (Vt) Pin #4= GND Pin #5= GND Pin #6= GND Marking: Line 1= 0134 (TST P/N) Line 2= TST Logo + VCO Product Code + Date Code Product Code Table: Date Code Table: WK01 WK02 WK03 WK04 WK05 WK06 WK07 WK08 WK09 WK10 WK11 WK12 A B C D E F G H I J K L WK13 M WK14 WK15 WK16 WK17 WK18 WK19 WK20 WK21 WK22 WK23 WK24 WK25 WK26 N O P Q R S T U V W X Y Z WK27 WK28 WK29 WK30 WK31 WK32 WK33 WK34 WK35 WK36 WK37 WK38 WK39 a b c d e f g h i j k l m WK40 WK41 WK42 WK43 WK44 WK45 WK46 WK47 WK48 WK49 WK50 WK51 WK52 n o p q r s t u v w x y z TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 3 Part Orientation: 8.2x6.0mm Package Carrier Tape Tape Width: 16 mm Tape Pitch (part to part): 12 mm Reel Diameter: 320.2mm (13 inch) Quantity per reel: 2000 [NOTES] 1. UNIT : MM. 2. UNLESS OTHERWISE SPECIFIED TOLERANCE ON DIM. +/-0.1MM. 3. MATERIAL: CONDUCTIVE POLYSTYRENE. 4. COLOR: BLACK. 5. 10 PITCH CUMULATIVE TOLERANCE +/-0.2MM. Tape & Reel: TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 4 Reflow Profile: Note: 1.Max peak temperature: 260+/-5 deg C; Time: 10+/-2 sec 2. Temperature: 217+/-5 deg C; Time: 90~100 sec TAI-SAW TECHNOLOGY CO., LTD. TST DCC Release document 5