® SEM ICON DU CTO R 10A SCHOTTKY BARRIER DIODE Dual High Voltage Schottky Rectifier Specification Features: High Voltage Wide Range Selection, 100V, 150V & 200V 1 2 High Switching Speed Device 3 Low Forward Voltage Drop TO-220AB Low Power Loss and High Efficiency Guard Ring for Over-voltage Protection High Surge Capability 1. Anode RoHS Compliant Matte Tin(Sn) Lead Finish 2. Cathode 3. Anode POLARITY CONFIGURATION Terminal Leads Surface is Corrosion Resistant and can withstand to 260°C Wave Soldering or per MIL-STD-750, Method 2026. DEVICE MARKING DESIGNATION: Line 1 & 2= Device Name Line 3 = Datecode Line 4 = Polarity MAXIMUM RATINGS (Per Leg, unless otherwise specified ) Symbol Parameter VRRM VRWM VR Maximum Repetitive Reverse Voltage Working Peak Reverse Voltage Maximum DC Reverse Voltage IF(AV) Average Rectified Forward Current Per Leg Per Package IFSM Non-repetitive Peak Forward Surge Current 8.3mS Single Phase @ Rated Load TSTG Storage Temperature Range TJ TCMBR10100CT TCMBR10150CT TCMBR10200CT Units 100 150 200 V 5 10 A 80 A -65 to +175 °C +175 °C Operating Junction Temperature These ratings are limiting values above which the serviceability of the diode may be impaired. THERMAL CHARACTERISTIC Symbol Parameter Value Units 1.5 °C/W Maximum Thermal Resistance, RθJC Junction-to-Case ELECTRICAL CHARACTERISTICS (Per Leg) Symbol Parameter IR Reverse Current VF Forward Voltage Note/s: 1. Test Condition TA = 25°C unless otherwise noted TCMBR10100CT TCMBR10150CT TCMBR10200CT (Note 1) Min Max Min Max Min Max @ rated VR --- 100 --- 100 --- 100 IF = 5A IF = 10A 0.850 --- 0.900 --- 0.900 µA 0.950 --- 0.950 Units V 1 Tested under pulse condition of 300µS. May 2008 Release, Revision C Page 1 TCMBR10100CT through TCMBR10200CT TAK CHEONG TAK CHEONG ® SEM ICON DU CTO R TO220 PACKAGE OUTLINE INCHES DIM A A1 A2 b b2 c D e E H1 L L1 ØP Q MILLIMETERS MIN MAX MIN MAX 0.140 0.020 0.080 0.015 0.045 0.014 0.560 0.096 0.380 0.230 0.500 --0.139 0.100 0.190 0.055 0.115 0.040 0.070 0.024 0.650 0.104 0.420 0.270 0.580 0.250 0.161 0.135 3.56 0.51 2.03 0.38 1.14 0.36 14.22 2.44 9.65 5.84 12.70 --3.53 2.54 4.83 1.40 2.92 1.02 1.78 0.61 16.51 2.64 10.67 6.86 14.73 6.35 4.09 3.43 NOTE: Above package outline conforms to JEDEC TO-220AB. This datasheet presents technical data of Tak Cheong’s Schottky Diodes. Complete specifications for the individual devices are provided in the form of datasheets. A comprehensive Selector Guide is included to simplify the task of choosing the best set of components required for a specific application. For additional information, please visit our website http://www.takcheong.com. Although information in this datasheet has been carefully checked, no responsibility for the inaccuracies can be assumed by Tak Cheong. Please consult your nearest Tak Cheong’s sales office for further assistance. Tak Cheong reserves the right to make changes without further notice to any products herein to further improve reliability, function or design, cost and productivity. TAK CHEONG ® and are registered trademarks of Tak Cheong Electronics (Holdings) Co., Ltd. May 2008 Release, Revision C Page 2