DC/DC Converters TES 1V Series, 1 Watt Features ◆ Small SMD package with standard footprint ◆ I/O-isolation voltage 3000 VDC ◆ Single- and dual output models ◆ High efficiency up to 80% ◆ Operating temperature range –40°C to +75°C ◆ High accuracy of pin co-planarity ◆ Qualified for leadfree reflow solder process according IPC/JEDEC J-STD-020D ◆ Available in tape and reel package ◆ 3-year product warranty The TES-1V series are miniature, 1W DC/DC-converters with high isolation in a SMD package. With a new package design these converters are qualified for the higher temperatures requested by lead-free reflow solder processes. With the small footprint, these converters are the ideal solution for board level power distribution, mainly for applications in the industrial- and telecom field. For automated SMD production lines the devices can be supplied in standard tape and reel package. Models Output current max. Efficiency typ. TES 1-0510V Order code 3.3 VDC 260 mA 72 % TES 1-0511V 5.0 VDC 200 mA 75 % 12 VDC 84 mA 79 % 15 VDC 67 mA 80 % TES 1-0512V TES 1-0513V TES 1-0521V Input voltage 5 VDC ±10% (nominal 5 VDC) Output voltage ±5 VDC ±100 mA 75 % TES 1-0522V ±12 VDC ±42 mA 79 % TES 1-0523V ±15 VDC ±34 mA 80 % TES 1-1210V 3.3 VDC 260 mA 73 % TES 1-1211V 5.0 VDC 200 mA 76 % TES 1-1212V 12 VDC 84 mA 80 % 15 VDC 67 mA 81 % ±5 VDC ±100 mA 76 % TES 1-1222V ±12 VDC ±42 mA 80 % TES 1-1223V ±15 VDC ±34 mA 80 % TES 1-2410V 3.3 VDC 260 mA 70 % TES 1-2411V 5.0 VDC 200 mA 73 % 12 VDC 84 mA 79 % 15 VDC 67 mA 79 % TES 1-1213V TES 1-1221V TES 1-2412V TES 1-2413V TES 1-2421V 12 VDC ±10% (nominal 12 VDC) 24 VDC ±10% (nominal 24 VDC) ±5 VDC ±100 mA 73 % TES 1-2422V ±12 VDC ±42 mA 79 % TES 1-2423V ±15 VDC ±34 mA 79 % http://www.tracopower.com Page 1 of 3 DC/DC Converters TES 1V Series 1 Watt Input Specifications Input current no load / full load 5 Vin models: 30 mA / 260 mA typ. 12 Vin models: 15 mA / 110 mA typ. 24 Vin models: 8 mA / 55 mA typ. Surge voltage (1 sec. max.) 5 Vin models: 9 V max. 12 Vin models: 18 V max. 24 Vin models: 30 V max. Reverse voltage protection 0.3 A max. Input filter internal capacitor Output Specifications Voltage set accuracy see graphs below Voltage balance (dual output models, balanced load) ±1.0 % max. Regulation – Input variation 1.2 % / 1 % change Vin – Load variation see graphs below Ripple and noise (20 MHz Bandwidth) 100 mVpp max. Temperature coefficient ±0.02 %/K max. Short circuit protection limited 0.5 sec. max. Capacitive load 3.3 & 5.0 12 & 15 ±5.0 ±12 & ±15 VDC VDC VDC VDC models: models: models: models: 33 µF max. 4.7 µF max. 10 µF max. 2.2 µF max. General Specifications Temperature ranges – Operating –25°C to +75°C with no derating – Storage –25°C to +125°C – Casing 95°C max. Humidity (non condensing) 95 % rel. H max. Reliability, calculated MTBF (MIL-HDBK-217F, @ 25°C, ground benign) >2 Mio h I/O isolation voltage (60 sec) 3000 VDC I/O isolation capacity (100 kHz, 1 V) 60 pF typ. I/O isolation resistance (500 VDC) >10 Gohm Switching frequency 50 to 150 kHz (depending on load) Output voltage variation dependent on load (at nominal input voltage) other models: +20% +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% 100% Deviation of Vout nom. Deviation of Vout nom. 3.3 & 5.0 VDC models: +20% +15% +10% +5% max. 0% typ. min. -5% -10% 0 20% 40% 60% Output Load 80% 100% All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TES 1V Series 1 Watt Physical Specifications Casing material non-conductive plastic (flammability to UL 94V-0 rated) Package weight 2.0 g (0.07 oz) Lead-free reflow solder process test report as per IPC J-STD-020D Moisture sensivity level (MSL) MSL report level 2 as per IPC J-STD-033B Outline Dimensions 1.8 2.54 2.54 (0.07) (0.10) 5.08 (0.10) (0.31) S 8.0 0.33 (0.01) Pin-Out 2.54 (0.20) (0.10) 5.5 (0.22) 11.0 11 10 8 2 3 8.0 Top view 1 5 5.5 (0.22) 0.25 (0.43) 7 (0.31) 12 0-4° 1.5 (0.06) 6 Dimensions in [mm], () = Inch Pin pitch tolerances: ±0.13 (±0.005) Other tolerances: ±0.25 (±0.01) Pin Single Dual 1 –Vin (GND) –Vin (GND) 2 +Vin +Vin 3 No con. No con. 5 –Vout Common 6 No con. –Vout 7 No con. No con. 8 +Vout +Vout 10 No con. No con. 11 No con. No con. 12 No con. No con. No con. = Pin to be isolated from circuitry 16.3 (0.64) Solder Pad Dimensions (0.04) 5.08 (0.20) 12.0 (0.47) 1.9 (0.07) 1.0 2.54 (0.10) Specifications can be changed any time without notice. Rev. 05/09 Jenatschstrasse 1 · CH-8002 Zurich · Switzerland Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com Page 3 of 3