T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Description Features The 1-inch Solid State Disk is small in size, has a • RoHS compliant huge capacity and low power consumption making it • perfect for use as a mobile storage solution in devices Fully compatible with 1.0-inch hard drive form factor and interface (35-Pin FPC ZIF connector) such as, Mobile Phones, PDA and GPS systems. • This guide is written to provide general installation Non-volatile Flash Memory for outstanding data retention and handling information, please use it in conjunction • with the Owner’s Manual for your device or system. Built-in 13/24 ECC (Error Correction Code) functionality and wear-leveling algorithm ensures highly reliable of data transfer Placement • Supports up to PIO Mode 4 and Ultra DMA Mode 5 • Supports ATA Security Commands • Support S.M.A.R.T function (self-definition) • Lower Power Consumption • Shock resistance • Power Supply: 3.3V ± 5% Dimensions Transcend Information Inc. Side Millimeters Inches A 40.00 ± 0.30 1.575 ± 0.012 B 30.00 ± 0.20 1.181 ± 0.008 C 3.80 ± 0.50 0.149 ± 0.020 1 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Specifications Specifications Physical Specification Form Factor 1-inch HDD Storage Capacities 2 GB to 32 GB Dimensions (mm) Length 30.0 0 ± 0.20 Width 40.00 ± 0.30 Height 3.80 ± 0.50 Weight 6g Connector 0.3 mm pitch 35-Pin Zero Insertion Force (ZIF) connector (P-ATA) Environmental Specifications ℃ to 70 ℃ - 40 ℃ to 85 ℃ 0 Operating Temperature Storage Temperature Humidity Operating Humidity (Non condensation) 5% to 95% Storage Humidity (Non condensation) 5% to 95% * Note: Reference to the IEC 60068-2-1 and IEC 60068-2-56 Testing procedures; 48-hours chamber test on ASUS ® M2N-MX, 1GB RAM, Windows XP Version 2002 SP2. Power Requirements Input Voltage DC 3.3V ± 5% Mode TYP (mA) MAX (mA) Power Consumption Write 84.5 93.4 (DC 3.3V @25 ) Read 55.1 68.4 Standby 0.4 1.3 ℃ * Note: Base on TS16GSSD10-M Transcend Information Inc. 2 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Reliability 13bit/1KB BCH ECC(2k+64 / 4k+128 byte per page flash) Data Reliability 24bit/1KB BCH ECC(4k+208 byte per page flash) Data Retention 10 years Connector Durability 10 times MTBF 4,400,000 hours Interface Specification No Device Driver Required Drivers ATA/ATAPI 7 PIO Modes 0 - 4 ATA Compatibility Multiword mode 0 - 2 UDMA Modes 0 - 5 Performance Model P/N Capacity Read Write Random Read Random Write TS2GSSD10-M 2GB 35213 7867 33952 2151 TS4GSSD10-M 4GB 35371 12248 33602 2674 TS8GSSD10-M 8GB 47805 10586 45816 3431 TS16GSSD10-M 16GB 45169 12134 40943 3796 TS32GSSD10-M 32GB 43686 16756 41457 3567 * Note : 25 ℃, according to 44 pin to 40 pin IDE transferring cable test on ASUS M2N-MX, 1GB RAM, IDE interface support ® UDMA4, Windows XP Version 2002 SP2, benchmark utility HDBENCH (version 3.4006), copied file 100MB Actual Capacity Model P/N Capacity Cylinder Head Sector TS2GSSD10-M 2GB 3884 16 63 TS4GSSD10-M 4GB 7769 16 63 TS8GSSD10-M 8GB 15538 16 63 TS16GSSD10-M 16GB 33149 15 63 TS32GSSD10-M * Note: FAT32 format 32GB 66298 15 63 Regulations Compliance CE, FCC and BSMI (T.B.D.) Transcend Information Inc. 3 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Package Dimensions Below figure illustrates the Transcend 1” Solid State Disk. All dimensions are in mm. Transcend Information Inc. 4 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Pin Assignments Pin No. Pin Name Pin No. Pin Name 01 03 GND DD9 02 04 DD10 DD2 05 DD8 06 DD1 07 09 -PDIAG -DASP 08 10 DD0 DA0 11 -DMACK 12 DA1 13 15 DMARQ IORDY 14 16 DA2 -RESET 17 -CSEL 18 VCC 19 21 VCC -DIOW 20 22 INTRQ -DIOR 23 -CS1 24 -CS0 25 27 DD15 DD14 26 28 DD7 DD6 29 DD13 30 DD5 31 33 DD12 DD11 32 34 DD4 DD3 35 GND Pin Layout Pin out GND DD10 DD9 DD2 DD8 DD1 -PDIAG DD0 -DASP DA0 -DMACK DA1 DMARQ DA2 IORDY -RESET -CSEL VCC VCC INTRQ -DIOW -DIOR -CS1 -CS0 DD15 DD7 DD14 DD6 DD13 DD5 DD12 DD4 DD11 DD3 GND 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 Transcend Information Inc. 5 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Block Diagram Data bus 35 PIN FPC Connector Control Signal D00 ~ D07 Flash Memory -CE0~CE7… D0 – D7 -CE0~CE3 -WE…-RE Others Solid State Disk Power Controller Flash Memory D10 ~ D17 -CE0~CE7… D0 – D7 -CE0~CE3 -WE…-RE DC Characteristics Parameter Symbol Min. Max. Unit Supply Voltage VCC 2.97 3.63 V High level output voltage VOH VCC – 0.8 Low level output voltage VOL High level input voltage Low level input voltage Pull up resistance 2 Pull down resistance VIH Remark V 0.8 V 2.4 V Non-schmitt trigger 2.05 V Schmitt trigger 0.6 V Non-schmitt trigger 1.25 V Schmitt trigger VIL RPU 52.7 141 KOhm RPD 47.5 172 kOhm 1 1 Note: 1. Include CS0#, CS1#, DMACK, HIOR#, HIOW# pins. 2. Include CS0#, CS1#, DMACK, HIOR#, HIOW#, CSEL#, PDIAG#, DASP# pins. Transcend Information Inc. 6 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Command Set FR SC SN CY DH LBA E5 or 98h – – – – Y – Support Execute Drive Diagnostic 90h – – – – Y – Support 3 Erase Sector C0h – Y Y Y Y Y Support 4 Flush Cache E7h – – – – Y – Support 5 Format Track 50h – Y – Y Y Y Support 6 Identify Device ECh – – – – Y – Support 7 Idle E3h or 97h – Y – – Y – Support 8 Idle Immediate E1h or 95h – – – – Y – Support 9 Initialize Drive Parameters 91h – Y – – Y – Support 10 Key Management Structure Read B9 (Feature 0-127) Y Y Y Y Y – NOT Support #1 11 Key Management Read Keying Material B9 (Feature 80) Y Y Y Y Y – NOT Support #1 12 Key Management Change Key Management Value B9 (Feature 81) Y Y Y Y Y – NOT Support #1 13 NOP 00h – – – – Y – NOT Support 14 Read Buffer E4h – – – – Y – Support 15 Read DMA C8h – Y Y Y Y Y Support 16 Read Long Sector 22h or 23h – Y Y Y Y NOT Support 17 Read Multiple C4h – Y Y Y Y Y Support 18 Read Sector(s) 20h or 21h – Y Y Y Y Y Support 19 Read Verify Sector(s) 40h or 41h – Y Y Y Y Y Support 20 Recalibrate 1Xh – – – – Y 21 Request Sense 03h – – – – Y – Support 22 Security Disable Password F6h – – – – Y – Support 23 Security Erase Prepare F3h – – – – Y – Support 24 Security Erase Unit F4h – – – – Y – Support 25 Security Freeze Lock F5h – – – – Y – Support 26 Security Set Password F1h – – – – Y – Support 27 Security Unlock F2h – – – – Y – Support Command Code 1 Check Power Mode 2 Transcend Information Inc. – Status Note #2 Support 7 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk 28 Seek 7Xh – – Y Y Y Y Support 29 Set Feature EFh Y – – – Y – Support 30 Set Multiple Mode C6h – Y – – Y – Support 31 Set Sleep Mode E6h or 99h – – – – Y – Support 32 Standby E2 or 96h – – – – Y – Support 33 Standby Immediate E0 or 94h – – – – Y – Support 34 Translate Sector 87h – Y Y Y Y Y Support 35 Wear Level F5h – – – – Y – Support 36 Write Buffer E8h – – – – Y – Support 37 Write DMA CAh – Y Y Y Y Y Support 38 Write Long Sector 32h or 33h – – Y Y Y Y Not Support 39 Write Multiple C5h – Y Y Y Y Y Support 40 Write Multiple w/o Erase CDh – Y Y Y Y Y Support 41 Write Sector(s) 30h or 31h – Y Y Y Y Y Support 42 Write Sector(s) w/o Erase 38h – Y Y Y Y Y Support 43 Write Verify 3Ch – Y Y Y Y Y Support #4 #2 #1: This command is optional, depending on the key Management scheme in use. #2: Use of this command is not recommended. #3: If Security command 22~27 are supported, this command is not supported. Definitions FR = Features Register SC =Sector Count register (00H to FFH, 00H means 256 sectors) SN = Sector Number register CY = Cylinder Low/High register DH = Head No. (0 to 15) of Drive/Head register LBA = Logic Block Address Mode Support – = Not used for the command Y = Used for the command Transcend Information Inc. 8 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk SMART Command Set SMART Command Set SMART Feature Register Values D0h Read Data D5h Read Log D1h Read Attribute Threshold D6h Write Log D2h Enable/Disable Autosave D8h Enable SMART Operations D3h Save Attribute Values D9h Disable SMART Operations D4h Execute OFF-LINE Immediate DAh Return Status * If reserved size is below the Threshold, the status can be read from Cylinder register by Return Status command (DAh). SMART Data Structure BYTE F/V Decription 0-1 X Revision code 2-361 X Vendor specific 362 V Off line data collection status 363 X Self-test execution status byte 364-365 V Total time in seconds to complete off-line data collection activity 366 X Vendor specific 367 F Off-line data collection capability 368-369 F SMART capability Error logging capability 370 F 7-1 Reserved 0 1=Device error logging supported 371 X Vendor specific 372 F Short self-test routine recommended polling time (in minutes) 373 F Extended self-test routine recommended polling time (in minutes) 374 F Conveyance self-test routine recommended polling time (in minutes) 375-385 R Reserved 386-395 F Date Code 396-397 F Number of initial invalid block (396 = MSB, 397 = LSB) 398-399 V Number of run time bad block (398 = MSB, 399 = LSB) 400 V Number of spare block Transcend Information Inc. 9 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 511 V 1.0” Solid State Disk Data structure checksum F=the content of the byte is fixed and does not change. V=the content of the byte is variable and may change depending on the state of the device or the commands executed by the device. X=the content of the byte is vendor specific and may be fixed or variable. R=the content of the byte is reserved and shall be zero. * 4 Byte value : [MSB] [2] [1] [LSB] Transcend Information Inc. 10 V1.6 T TS S22G GS SS SD D1100--M M ~~ T TS S3322G GS SS SD D1100--M M 1.0” Solid State Disk Ordering Information TS XG SSD XX Form Factor 10 = 1” (SLC) 10-M = 1” (MLC) 10-I = 1” Industrial (SLC) Transcend Product Capacity: 2G-32G = 2 GB up to 32 GB Solid State Disk The above technical information is based on industry standard data and has been tested to be reliable. However, Transcend makes no warranty, either expressed or implied, as to its accuracy and assumes no liability in connection with the use of this product. Transcend reserves the right to make changes to the specifications at any time without prior notice. JAPAN E-mail: [email protected] www.transcend.jp CHINA E-mail: [email protected] www.transcendchina.com TAIWAN GERMANY No.70, XingZhong Rd., NeiHu Dist., Taipei, Taiwan, R.O.C TEL +886-2-2792-8000 Fax +886-2-2793-2222 E-mail: [email protected] www.transcend.com.tw E-mail: [email protected] www.transcend.de HONG KONG E-mail: [email protected] www.transcendchina.com Korea E-mail: [email protected] www.transcend.co.kr USA Los Angeles: E-mail: [email protected] Maryland: E-mail: [email protected] www.transcendusa.com Transcend Information Inc. THE NETHERLANDS E-mail: [email protected] www.transcend.nl United Kingdom E-mail: [email protected] www.transcend-uk.com 11 V1.6