TRUMPower 110 WATT MEDICAL POWER SUPPLIES D E SCR IPTION TM110 SERIES The TM110 series of compact, open PCB constructed, AC-DC switching power supplies are specially designed for medical applications. They are capable of delivering 72 to 110 watts of continuous power at 25 CFM forced air cooling or 80 watts at convection cooling. They operate at 85 to 264VAC input voltage without the need of changing jumper. All models meet the safety requirements of UL, CSA and IEC for medical applications. ( LV D ) RoHS F EATU R E S ‧ Low safety ground leakage current ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ M e e t E N 5 5 0 11 a n d F C C C l a s s B Small size, light weight 100% burn-in W i d e i n p u t r a n g e 8 5 t o 2 6 4 VA C Input surge current protection O v e r v o l ta g e p r o t e c t i o n s Overcurrent protections C o m p l i a n t w i t h R o H S r e q u i r e m e n ts S af e t y Sta nd ar d A pp ro va l s： UL 2601-1 CSA C22.2 No. 601.1 TÜV EN60601-1 ENVIRONMENTAL SPECIFICATIONS INPUT SPECIFICATIONS 8 5 t o 2 6 4 VA C 47 to 63 Hz 3 . 2 0 A ( r m s ) f o r 11 5 VA C 1 . 8 0 A ( r m s ) f o r 2 3 0 VA C E a r t h l e a k a g e c u r r e n t ： 9 0 µ A m a x . @ 11 5 VA C , 6 0 H z 1 5 0 µ A m a x . @ 2 3 0 VA C , 5 0 H z Operating temperature: Storage temperature: Relative humidity： Derating: OUTPUT SPECIFICATIONS GENERAL SPECIFICATIONS I n p u t v o l ta g e ： Input frequency： Input current： Output voltage/current: Total output power: Ripple and noise: See rating chart 110 watts maximum at 25 CFM forced air cooling or 80 watts maximum at convection cooling 1% peak to peak maximum Overvoltage protection: Provided on output #1 only; set at 112-132% of its nominal output voltage Overcurrent protection: All outputs protected to short circuit conditions All outputs ±0.04%/ºC max. Maximum excursion of 4% or better on all models, recovering to 1% of final value within 500µs after a 25% step load change TTL logic high for normal operation and TTL logic low upon loss of input power. This signal appears at least 1ms prior to +5V output dropping 5% below its nominal value. This signal also provides a minimum delay of 100ms after +5V is within regulation Temperature coefficient: Transient response: PFD signal: Cooling： 0ºC to +70ºC -40ºC to +85ºC 5% to 95% non-condensing Derate from 100% at +50ºC linearly to 50% at +70ºC 110 watts continuous output power at 25 CFM forced air cooling or 80 watts at convection cooling Switching frequency: Efficiency: 20KHz to 250KHz, varies with load and line 70% minimum on single output models with Vo ≥12V, 65% minimum on the others 12 msec minimum at 110VAC Hold-up time: ±0.5% maximum at full load Line regulation: 15 amps @115VAC or 30 amps Inrush current: @ 230VAC at 25ºC cold start 4000VAC from input to output Withstand voltage: 1500VAC from input to ground 500VAC from output to ground 400,000 hours minimum at full load MTBF: at 25ºC ambient, calculated per MIL-HDBK-217F, excluding DC fan. EMC Performance (EN60601-1-2: 2001) EN55011: Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion, Class A EN61000-3-3: Line flicker EN61000-4-2: ESD, ±8KV air and ±6KV contact EN61000-4-3: Radiated immunity, 3V/m for 80~2500MHz EN61000-4-4: Fast transient/burst, ±2KV EN61000-4-5: Surge, ±1KV diff, ±2KV com. EN61000-4-6: Conducted immunity, 3Vrms EN61000-4-8: Magnetic field immunity, 3A/m EN61000-4-11: Voltage dips, 30% reduction for 500ms, 60% reduction for 100ms and >95% reduction for 10ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com MEDICAL GRADE TM110 SERIES OUTPUT VOLTAGE/ CURRENT RATING CHART Output #1 Vnom. Imin. Imax. 3.3V 0A 22A 5.0V 0A 22A 12V 0A 9.0A 15V 0A 7.5A 24V 0A 4.5A 30V 0A 3.6A +5.1V 0A 10A +5.1V 0A 10A +5.1V 0A 10A +5.1V 0A 10A +5.1V 0A 10A +5.1V 0A 10A +5.1V 0A 10A +5.1V 2A 10A +5.1V 0A 10A +5.1V 0A 10A Product No. TM110-S3.3 TM110-S5.0 TM110-S12 TM110-S15 TM110-S24 TM110-S30 TM110-D23 TM110-T31 TM110-T32 TM110-Q40 TM110-Q41 TM110-Q42 TM110-Q45 TM110-Q45-1 TM110-Q45-2 TM110-Q46 NOTES: 1. 2. 3. 4. Tol. 3% 3% 2% 2% 2% 2% 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output #2 Vnom. Imin. Imax. Ipeak (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) +12V 0A 5A 9.0A +12V 0A 5A 9.0A +15V 0A 4A 7.5A +12V 0A 5A 9.0A +15V 0A 4A 7.5A +12V 0A 5A 9.0A +12V 0A 5A 9.0A +12V 0A 5A 9.0A +24V 0A 3A 5.0A +15V 0A 4A 7.5A Tol. 3% 3% 3% 3% 3% 3% 3% 3% 3% 3% Output #3 Vnom. Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) -12V 0A 1A -15V 0A 1A -12V 0A 1A -15V 0A 1A -12V 0A 1A -12V 0A 1A -12V 0A 1A -12V 0A 1A -15V 0A 1A Tol. 4% 4% 4% 4% 4% 4% 4% 4% 4% Maximum Output #4 Output Vnom. Imin. Imax. Tol. Power (N/A) 72W (N/A) 110W (N/A) 110W (N/A) 110W (N/A) 110W (N/A) 110W (N/A) 110W (N/A) 110W (N/A) 110W -5V 0A 1A 4% 110W +24V 0A 1A 4% 110W +12V 0A 1A 4% 110W +24V 0A 1A 4% 110W +24V 1.5A 3A 10% 110W +12V 0A 1A 4% 110W -5V 0A 1A 4% 110W Peak output current with 10% maximum duty cycle for less than 60 seconds. Total peak power must not exceed 130 watts. 110 watts maximum at 25 CFM forced air cooling or 80 watts maximum at convection cooling, except model TM110-S3.3 which is rated maximum 60 watts at convection cooling or 72 watts at 25 CFM forced air cooling. Safety agency approvals are for the above listed models in PCB format. To order models with metallic L-bracket or box, add suffix “B” for L-bracket format, or “C” for enclosed format, e.g. TM110-S24C. The output #1 of model TM110-Q45-1 needs a minimum current of 2A to support the other outputs at their maximum rated loads. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions shown in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Input connector mates with Molex housing 09-50-3051 and Molex 2878 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2878 series crimp terminal. 5. Weight: 640 grams (PCB format) 6. The copper pad of the mounting hole near P1 is for system grounding through a metallic stand-off to system chassis. PIN CHART Product No. PIN TM110-S3.3 TM110-S12 TM110-S24 TM110-D23 TM110-S5.0 TM110-S15 TM110-S30 TM110-T31 TM110-T32 TM110-Q40 TM110-Q42 TM110-Q45-1 TM110-Q46 TM110-Q41 TM110-Q45 TM110-Q45-2 1, 2, 3 4, 5 6, 7 8, 9 10 11 12 13 OUTPUT #1 RETURN RETURN OUTPUT #1 P.F.D N.C. KEY N.C. OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D N.C. KEY N.C. OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D OUTPUT #3 KEY N.C. OUTPUT #1 COMMON RETURN COMMON RETURN OUTPUT #2 P.F.D OUTPUT #3 KEY OUTPUT #4 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com