TS25P01G - TS25P07G Pb Single Phase 25.0 AMPS. Glass Passivated Bridge Rectifiers TS6P RoHS COMPLIANCE Features UL Recoganized File # E-326243 Glass passivated junction Ideal for printed circuit board High case dielectric strength of 2500VRMS Plastic material has Underwriters laboratory flammability Classification 94V-0 Typical IR less than 0.1uA High surge current capability to 200A High temperature soldering guaranteed: 260℃ / 10 seconds at 5 lbs., ( 2.3 kg ) tension Green compound with suffix “G” on packing code & prefix “G” on datecode. Dimension in inches and (millimeter) Mechanical Data Case : Molded plastic body Terminal : Pure tin plated , Lead free. Leads solderable per MIL-STD-202 Method 208 Weight : 7.15 grams (0.252 ounce) Mounting Torque : 8.17 in-lbs Max. Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol TS25P TS25P TS25P TS25P TS25P TS25P TS25P Maximum Recurrent Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @ T c = 100oC Peak Forward Surge Current, 8.3 ms Single Half Sinewave Superimposed on Rated Load (JEDEC method ) Rating of fusing ( t < 8.3mS ) Maximum Instantaneous Forward Voltage @ 12.5A @ 25.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Junction Capacitance per leg (Note 1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 02G 100 03G 200 04G 400 05G 600 06G 800 07G 1000 Units 01G 50 V I(AV) 25.0 A IFSM 300 A I2t 373 A2S VF 1.0 V 1.1 10 IR 500 uA 140 pF RθJC 0.6 oC/W TJ -55 to +150 O C TSTG -55 to +150 O C Cj Note 1 : Measured at 1MHz and applied Reverse bias of 4.0V DC. 2. Device mounted on 4" x 5" x 0.25" Al-plate heat sink, 1 of 2 Version : D09 Rating and Sharacteristic Curves (TS25P01G Thru TS25P07G) FIG 1 Maximum Derating Curve for Output 300 25 20 Heat-sink Mounting 15 4.0"x5.0"x0.25 10 " Aluminum plate 5 Half Sin-wave (Jedec Method) 200 150 100 50 0 0 0 20 40 60 80 100 Case Temperature (oC) 120 140 160 FIG 3 Typical Reverse Characteristics per Leg Instantaneous Forward Current (A) Ta=125oC 10 1 10 100 Number of cycles at 60 Hz FIG 4 Typical Forward Characteristics per Leg. 100 100 Instantaneous Reverse Current (uA) 8.3mS Single 250 (A) Peak Forward Surge Current 30 Average Forward Current (A) FIG 2 Maximum Forward Surge Current per Leg Current 10 1 Ta=25oC 0.1 1 0.1 0.01 0.6 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Volatge (%) 0.8 1 1.2 1.4 Instantaneous Forward Voltage (V) FIG 5 Typical Junction Capacitance Junction Capacitance (pF) 1000 100 10 0.1 1 10 Reverse Voltage (V) 100 2 of 2 Version : D09