SM TTL/CMOS/SINE VCXO Voltage Controlled Crystal Oscillator • • • • • 13.85x8.6x5.0mm SMD package Up to 160 MHz or higher upon request. TTL/CMOS or Sine wave output Metal cover, FR-4 PCB based. Broad range of Pullability specifications VO403 Specifications: VO-K Frequency Range: 1.5 MHz ~ 160 MHz Operating Temperature: -10°C ~ +60°C -B -20°C ~ +70°C -C -30°C ~ +80°C -D -40°C ~ +85°C -L Storage Temperature: -40°C ~ +125°C Stability Vs. Temperature: ± 25ppm max - 25 ± 30ppm max - 30 ± 50ppm max - 50 Vs. Input Voltage: ± 5ppm ± 5% Pulling Range: ± 100 ppm Control Voltage: 0.5V to 4.5V (VDD=5V) - Standard 0.3V to 3.0V (VDD=3.3V) Output Waveform Rise/Fall Time Current Consumption: (max) 1.5MHz ~ 20MHz TTL/50±5% -A HCMOS/15pF/50±5% -J HCMOS/50pF/50±5% -F 8ns max (2MHz ~ 20MHz) 5ns max (20MHz ~ 60MHz) Pin Configurations 3ns max (60MHz ~ 160MHz) #1 Vcon #2 Ground VDD: 3.3V #3 Output 20mA #4 Supply VDD #5 Tri-State #6 NC VDD: 5.0V 30mA 20MHz ~ 60MHz 40mA 30mA 60MHz ~ 160MHz 50mA 30mA Supply Voltage: 3.3V ± 10% - Standard 5.0V ± 10% -P All dimensions are in mm Ordering Information Note: 1. Other frequencies, stabilities, and operating temperature ranges available. Consult VTC Support for specific requirements. 2. Not all combinations of the above, stabilities, and temperature ranges are available. Consult VTC Support if your requirement is not standard. 3. All specifications subject to change without notice. Phone: +86 10 6301 4184 © 2004 by Vanlong Technology Co., Ltd. Fax: +86 10 6301 9167 Product name + Temperature Code + Stability + Output Code + Pulling Range + VDD Code + Frequency. i.e. VO403C25FP – 155.520MHz Email: [email protected] Web: http://www.vanlong.com VO403