DTAM65 Series 65 Watt Single Output AC/DC Medical Desktop Adapter FEATURES ● LED Option ● High Reliability ● Universal Input ● 100% Hi-Pot Tested ● AC Inlet: IEC 320-C14 ● 100% BURN-IN Tested ● Safety Approvals, EMC Compliance SPECIFICATIONS: DTAM65 Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage Range Rated Input Voltage Range Input Frequency Input Current Inrush Current OUTPUT SPECIFICATIONS Output Current Output Voltage Line Regulation Ripple & Noise (20MHz BW) Hold Up Time PROTECTION Short Circuit Protection Over Voltage Protection Over Power Protection GENERAL SPECIFICATIONS 90 - 264VAC (Full Range) 100 - 240VAC 47 - 63Hz 2A max. 30A at maximum at 115VAC, 60A at maximum at 230VAC See Table See Table < 1% See Table >16.6ms typical at full load and 115VAC Auto recover Auto recover Auto recover Efficiency No Load Power Consumption ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature MTBF PHYSICAL SPECIFICATIONS 5V, 12V > 75% Avg. 115 or 230VAC 15V ~ 48V > 85% Avg. 115 or 230VAC (Meet CEC 2008) < 0.5W at 230VAC 0°C to +70°C ambient (derating at 2.5%/°C from 50°C to 70°C) -10°C to +85°C >100,000 hours at full load and 25°C ambient temperature Weight Dimensions AC Input Warranty SAFETY & EMI Approximately 12oz. 132.0(L) x 69.00(W) x 40.00(H) mm IEC 320-C14 Inlet 2 years Safety Standards EMC Standards UL/c-UL UL60601-1, TUV EN60601-1, CB IEC60601-1 EN60601-1-2, FCC Part 18 Class B, EN55011 Class B, CE Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 DTAM65 Series 65 Watt Single Output AC/DC Medical Desktop Adapter OUTPUT VOLTAGE / CURRENT RATING CHART Model Output Voltage Output Current Output Power Output Regulation Ripple & Noise DTAM040A1Y05X DTAM060A1Y12X DTAM060A1Y15X DTAM065A1Y18X DTAM065A1Y24X DTAM065A1Y36X DTAM065A1Y48X 5 VDC 12 VDC 15 VDC 18 VDC 24 VDC 36 VDC 48 VDC 8A 5A 4A 3.6A 2.7A 1.8A 1.35A 40W 60W 60W 64.8W 64.8W 64.8W 64.8W 5% 5% 5% 3% 3% 3% 3% 100mVp-p 120mVp-p 150mVp-p 180mVp-p 240mVp-p 360mVp-p 480mVp-p NOTES 1. The suffix X can be blank for no LED or L for a green LED. Contact factory for ordering details. 2. Ripple & Noise is measured at 20MHz bandwidth with a tantalum 10uF in parallel with a 0.1uF ceramic capacitor. MECHANICAL DRAWING STANDARD OUTPUT CABLE 1. AWM 1185#18AWG 1C+SHIELDING, UL 80°C 300V VW-1, 1800mm. 2. AWM 1571#14~16AWG 1C+SHIELDING, UL 80°C 30V VW-1, 1800mm. 3. Depends on customer’s requirements. Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797