WALL DTSPU20A-111

DTSPU20 Series
20 Watt
Single Output
AC/DC Desktop Power Supply
FEATURES
● Splash Proof
● Single Output
● 3 Year Warranty
● A Type: Class I Insulation
● Optional Output Connectors
● CEC and Energy Star Compliance
● 2 Types of Inlet Connectors Available
● Approved as Limited Power Source (LPS)
● Wide Input Voltage 90 to 264VAC, 47~63Hz
● B Type: Class II Insulation (Double Insulation)
● Output Voltages Available from 3VDC to 48VDC
Type A
Type B
SPECIFICATIONS: DTSPU20 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
INPUT (Vin)
Operating Voltage Range
Input Frequency
Input Current (Low Line)
Input Current (High Line)
Inrush Current (Low Line)
Inrush Current (High Line)
Safety Ground Leakage Current (A Type)
Safety Ground Leakage Current (B Type)
Start-Up Time
OUTPUT (Vo)
Output Voltage Range
Load Regulation
Line Regulation
Output Power Range
Output Current Range
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
PROTECTION
Over Voltage Protection
Over Current Protection
GENERAL
Efficiency
Dielectric Withstanding Voltage
For Primary to Secondary
Dielectric Withstanding Voltage
For Primary to Ground (A Type Only)
Isolation Resistance
Power Consumption (No Load)
ENVIRONMENTAL
Operating Temperature
Storage Temperature
Relative Humidity
Temperature Coefficient
MTBF
PHYSICAL
Weight
Dimensions
Input Inlet
Warranty
SAFETY
CISPR (EMI Requirements for CISPR-22)
FCC (EMI Requirements for FCC Part-15)
Min
Nom
Max
Unit
12
26
0.5
0.15
0.25
264
63
0.4
0.25
15
30
0.75
0.25
0.5
VAC
Hz
A
A
A
A
mA
mA
s
90
47
Io = Full Load, Vin = 115VAC
Io = Full Load, Vin = 230VAC
Io = Full Load, 25°C, Cool Start, Vin = 115VAC
Io = Full Load, 25°C, Cool Start, Vin = 230VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 240VAC
Io = Full Load, Vin = 100VAC
Vin = 230VAC
Io = Full Load
Vin = 90 to 264VAC
See Rating Chart
3
5
0.5
1
0
20
See Rating Chart
0.5
1
4
12
14
16
VDC
%
%
W
A
%
ms
ms
Nil
%
%
1
Full Load, Vin = 90VAC
Io = Full Load to Half Load, Vin = 100VAC
Io = Full Load, Vin = 110VAC
110
Io = Full Load, Vin = 230VAC
75
150
85
95
%
Primary to Secondary
4242
VDC
Primary to Ground
2121
VDC
Test Voltage = 500VDC
No Load, Vin = 240VAC
50
0
Derate linearly from 100% Load at 40°C to 50% load at 70°C
0.4
0
-40
5
-0.04
All Outputs
0.5
70
85
95
+0.04
300,000
MΩ
W
°C
°C
%
%/°C
hours
Approximately 170 grams
3.90 x 1.65 x 1.22 inches
A Type: IEC-320-C6, B Type: IEC-320-C8
3
years
Vin = 220VAC
Vin = 110VAC
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
B
B
Class
Class
DTSPU20 Series
20 Watt
Single Output
AC/DC Desktop Power Supply
OUTPUT VOLTAGE/ CURRENT RATING CHART
Model Number
Preset Voltage
DTSPU20A-102
6 VDC
Output Voltage
Range
5 ~ 6 VDC
DTSPU20A-105
13 VDC
DTSPU20A-106
DTSPU20A-108
Output Current
Total Regulation
Max Output Power
3.00 ~ 2.50A
5%
15W
11 ~ 13 VDC
1.81 ~ 1.53A
4%
20W
16 VDC
13 ~ 16 VDC
1.53 ~ 1.25A
4%
20W
27 VDC
21 ~ 27 VDC
0.95 ~ 0.74A
3%
20W
DTSPU20A-109
33 VDC
27 ~ 33 VDC
0.74 ~ 0.60A
3%
20W
DTSPU20A-111
48 VDC
40 ~ 48 VDC
0.50 ~ 0.41A
3%
20W
DTSPU20B-102
6 VDC
5 ~ 6 VDC
3.00 ~ 2.50A
5%
15W
DTSPU20B-105
13 VDC
11 ~ 13 VDC
1.81 ~ 1.53A
4%
20W
DTSPU20B-106
16 VDC
13 ~ 16 VDC
1.53 ~ 1.25A
4%
20W
DTSPU20B-108
27 VDC
21 ~ 27 VDC
0.95 ~ 0.74A
3%
20W
DTSPU20B-109
33 VDC
27 ~ 33 VDC
0.74 ~ 0.60A
3%
20W
DTSPU20B-111
48 VDC
40 ~ 48 VDC
0.50 ~ 0.41A
3%
20W
AC Inlet
Connector
IEC-320-C6
IEC-320-C8
NOTES
1. The DTSPU20 Series is designated as DTSPU20x-y where x represents the type of AC input inlet connector which can either
be A (IEC-320-C6) or B (IEC-320-C8); y can be 102, 103, 104, 105, 106, 107, 108, 109, 110 or 111 for output voltage.
2. The output voltage is specified as a range (Ex: 40 ~ 50VDC); the preset voltage will be set as standard models if nothing
different is requested. Please contact factory for ordering details.
3. To meet the total regulation specifications all models must use an AWG#18/4FT output cable. The regulation will change if
the output cable is modified.
4. The PSE Mark is not for each model. Please contact sales if you need to put the PSE Mark on your products.
5. Optional output connectors are available (see “DC Output Plug Selector List” link located at the bottom of the “Desktop”
category page).
DERATING CURVE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
DTSPU20 Series
20 Watt
Single Output
AC/DC Desktop Power Supply
MECHANICAL DRAWINGS
Unit: inches [mm]
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797