KBPC15, 25, 35/W SERIES W TE PO WE R SEM IC O ND UC TO R S 15, 25, 35A HIGH CURRENT BRIDGE RECTIFIER Features ! Diffused Junction A ! ! ! Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Metal Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V UL Recognized File # E157705 C ! ! A C G G ~ D + ~ - C ! ! ! ! - ~ D H Mechanical Data ! + C H ! ~ E Case: Metal Case with Electrically Isolated Epoxy Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Case Mounting: Through Hole for #10 Screw Weight: KBPC 31.6 grams (approx.) KBPC-W 28.5 grams (approx.) Marking: Type Number E B B KBPC KBPC-W KBPC "W” Suffix Designates Wire Leads No Suffix Designates Faston Terminals Maximum Ratings and Electrical Characteristics Dim A B C D E G H KBPC-W Min Max Min Max 28.40 28.70 28.40 28.70 10.97 11.23 10.97 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 22.86 25.40 30.50 — Hole for #10 screw, 5.08Ø Nominal 6.35 Typical 0.97Ø 1.07Ø All Dimension in mm @TA=25°C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Symbol -00/W -01/W -02/W -04/W -06/W -08/W -10/W Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V Average Rectifier Output Current @TC = 60°C KBPC15 KBPC25 KBPC35 IO 15 25 35 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave Superimposed on rated load (JEDEC Method) KBPC15 KBPC25 KBPC35 IFSM 300 400 400 A KBPC15 @IF = 7.5A KBPC25 @IF = 12.5A KBPC35 @IF = 17.5A VFM 1.2 V @TC = 25°C @TC = 125°C IRM 10 1.0 µA mA KBPC15 KBPC25 KBPC35 I2t 373 373 664 A2s Forward Voltage Drop (per element) Peark Reverse Current At Rated DC Blocking Voltage I2t Rating for Fusing (t < 8.3ms) (Note 1) KBPC15, 25, 35/W SERIES 1 of 4 © 2002 Won-Top Electronics Maximum Ratings and Electrical Characteristics Typical Junction Capacitance (per element) (Note 2) Typical Thermal Resistance Junction to Case (per element) (Note 3) KBPC15 KBPC25 KBPC35 RMS Isolation Voltage from Case to Lead Operating and Storage Temperature Range @TA=25°C unless otherwise specified Cj 300 pF RJC 6.3 3.8 2.7 K/W VISO 2500 V Tj, TSTG -65 to +150 °C * Glass passivated forms are available upon request. Note: 1. Measured at non-repetitive, for t > 1ms and < 8.3ms. 2. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 3. Thermal resistance junction to case mounted on heatsink. KBPC15, 25, 35/W SERIES 2 of 4 © 2002 Won-Top Electronics Mounted on a 220 x 220 x 50 mm AL plate heatsink KBPC35 IF, AVERAGE FORWARD CURRENT (A) IF, INSTANTANEOUS FORWARD CURRENT (A) 40 30 KBPC25 20 KBPC15 10 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 1.0 0.1 Tj = 25°C Pulse Width = 300µs 0.01 150 0 0.8 1.0 1.2 1.4 1.6 1.8 1000 Single Half-Sine Wave (JEDEC Method) f = 1 Mhz Tj = 25°C 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TC, CASE TEMPERATURE (°C) Fig. 1 Forward. Current Derating Curve 400 0.2 KBPC25, 35 200 KBPC15 100 100 Tj = 150°C 0 1 10 100 10 0.1 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current IR, INSTANTANEOUS REVERSE CURRENT (µA) 1.0 100 Tj = 125°C 10 1.0 0.1 Tj = 25°C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) KBPC15, 25, 35/W SERIES 3 of 4 © 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity KBPCxx00 Square Bridge 50 Units/Box KBPCxx00W Square Bridge 50 Units/Box KBPCxx01 Square Bridge 50 Units/Box KBPCxx01W Square Bridge 50 Units/Box KBPCxx02 Square Bridge 50 Units/Box KBPCxx02W Square Bridge 50 Units/Box KBPCxx04 Square Bridge 50 Units/Box KBPCxx04W Square Bridge 50 Units/Box KBPCxx06 Square Bridge 50 Units/Box KBPCxx06W Square Bridge 50 Units/Box KBPCxx08 Square Bridge 50 Units/Box KBPCxx08W Square Bridge 50 Units/Box KBPCxx10 Square Bridge 50 Units/Box KBPCxx10W Square Bridge 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com KBPC15, 25, 35/W SERIES We power your everyday. 4 of 4 © 2002 Won-Top Electronics