S2A – S2M WTE POWER SEMICONDUCTORS Pb 2.0A SURFACE MOUNT GLASS PASSIVATED STANDARD DIODE Features ! Glass Passivated Die Construction ! ! ! ! ! ! Ideally Suited for Automatic Assembly B Low Forward Voltage Drop Surge Overload Rating to 60A Peak Low Power Loss A Built-in Strain Relief F Plastic Case Material has UL Flammability Classification Rating 94V-O C H G E SMB/DO-214AA Dim Min Max 3.30 3.94 A 4.06 4.70 B 1.91 2.11 C 0.152 0.305 D 5.08 5.59 E 2.13 2.44 F 0.051 0.203 G 0.76 1.27 H All Dimensions in mm Mechanical Data ! ! ! ! ! ! Case: SMB/DO-214AA, Molded Plastic Terminals: Solder Plated, Solderable per MIL-STD-750, Method 2026 Polarity: Cathode Band or Cathode Notch Marking: Type Number Weight: 0.093 grams (approx.) Lead Free: For RoHS / Lead Free Version, Add “-LF” Suffix to Part Number, See Page 4 Maximum Ratings and Electrical Characteristics Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TL = 110°C D @TA=25°C unless otherwise specified Symbol S2A S2B S2D S2G S2J S2K S2M Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 2.0 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 60 A Forward Voltage @IF = 2.0A VFM 1.10 V @TA = 25°C @TA = 125°C IRM 5.0 200 µA Reverse Recovery Time (Note 1) trr 2.5 µS Typical Junction Capacitance (Note 2) Cj 30 pF RJL 16 °C/W Tj, TSTG -55 to +150 °C Peak Reverse Current At Rated DC Blocking Voltage Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range Note: 1. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A, 2. Measured at 1.0 MHz and applied reverse voltage of 4.0 V DC. 3. Mounted on P.C. Board with 8.0mm2 land area. S2A – S2M 1 of 4 © 2006 Won-Top Electronics 2.0 1.5 1.0 0.5 Resistive or inductive load 0 20 40 60 80 100 120 140 160 IF, INSTANTANEOUS FORWARD CURRENT (A) IAV, AVERAGE FORWARD CURRENT (A) 2.5 10 1.0 0.1 Tj = 25°C IF PULSE WIDTH = 300 µS 0.01 0.5 TL , LEADTEMPERATURE (ºC) IR, INSTANTANEOUS REVERSE CURRENT (µA) IFSM , PEAK FORWARD SURGE CURRENT (A) Single Half-Sine-Wave JEDEC Method 50 40 30 20 10 0 100 1.3 1.5 1000 100 Tj = 125°C 10 1.0 Tj = 25°C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve S2A – S2M 1.1 Fig. 2 Typical Forward Characteristics 60 10 0.9 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 1 Forward Current Derating Curve 1 0.7 Fig. 4 Typical Reverse Characteristics 2 of 4 © 2006 Won-Top Electronics MARKING INFORMATION RECOMMENDED FOOTPRINT 0.050 MIN (1.27 MIN) WTE S2x Cathode WTE S2x x 0.082 MIN (2.10 MIN) = Polarity Band = Manufacturer’s Logo = Device Number = A, B, D, G, J, K or M 0.106 MAX (2.65 MAX) inches(mm) PACKAGING INFORMATION TAPE & REEL Direction of Unreeling 8mm 330mm 12mm 1.6mm 4mm 12mm Product ID Label Reel Diameter (mm) Quantity (PCS) Inner Box Size L x W x H (mm) Quantity (PCS) Carton Size L x W x H (mm) Quantity (PCS) Approx. Gross Weight (KG) 330 3,000 340 x 337 x 45 6,000 370 x 370 x 420 48,000 14.0 Note: 1. Paper reel, white or gray color. 2. Components are packed in accordance with EIA standard 481-1 and 481-2. S2A – S2M 3 of 4 © 2006 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity S2A-T3 SMB 3000/Tape & Reel S2B-T3 SMB 3000/Tape & Reel S2D-T3 SMB 3000/Tape & Reel S2G-T3 SMB 3000/Tape & Reel S2J-T3 SMB 3000/Tape & Reel S2K-T3 SMB 3000/Tape & Reel S2M-T3 SMB 3000/Tape & Reel 1. 2. Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. To order RoHS / Lead Free version (with Lead Free finish), add “-LF” suffix to part number above. For example, S2A-T3-LF. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: [email protected] Internet: http://www.wontop.com We power your everyday. S2A – S2M 4 of 4 © 2006 Won-Top Electronics