Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 744221 LF STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 RoHS compliant DATUM / DATE : 2004-10-11 A Mechanische Abmessungen / dimensions : C H 3 B 4 G D A 2 WE F 2 3 = = = = = 4 1 1 Ee A B C D E F G H 9,2 ± 0,3 6,0 ± 0,3 5,0 ± 0,3 2,0 ref. 2,54 ± 0,2 5,7 ref. 1,4 ref. 1,0 ± 0,1 mm mm mm mm mm mm mm @@FRM 1@@ B Elektrische Eigenschaften / electrical properties : Testbedingungen / test conditions 5 mV, 100 kHz C Lötpad / soldering spec. : Wert / value Einheit / unit tol. L1-4;2-3 2.000 µH ± 50% UDC 80 V RDC 0,42 Ω max. IDC 0,60 A max. Z 9200 Ω max. 1,2 2,54 , Eigenschaften / properties Induktivität / inductance Nennspannung/ rated voltage DC-Widerstand / DC-resistance Nennstrom / rated current Impedanz / impedance D Prüfgeräte / test equipment : 2,0 9,5 E Testbedingungen / test conditions : HP 4274 A für/for L und/and Q Luftfeuchtigkeit / humidity: 33% HP 34401 A für/for IDC und/and RDC Umgebungstemperatur / temperature: +20°C F Werkstoffe & Zulassungen / material & approvals : G Eigenschaften / granted properties : Basismaterial / base material: Ferrit / ferrite Betriebstemp. / operating temperature: Draht / wire: Class F Umgebungstemp. / ambient temperature: -40°C - + 85°C UL94-V0 It is recommended that the temperature of the part does Gehäuse / Housing: -40°C - + 125°C not exceed 125°C under worst case operating conditions. Spannungsfestigkeit / High-Pot Test:(60Hz 3mA 3sec.) Freigabe erteilt / general release: .......................................................................... Datum / date 500 VAC Kunde / customer ............................................................................... Unterschrift / signature Würth Elektronik MST Version 5 2004-10-11 MST Version 4 2004-03-29 AG Version 3 2003-04-15 MST Version 2 2003-03-04 Version 1 .......................................................................... ............................................................................... MST Geprüft / checked Kontrolliert / approved Name Änderung / modification 2002-04-17 Datum / date Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 2 Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : 744221 STROMKOMP. SMD LINE FILTER WE-SL2 COMMON MODE SMD LINE FILTER WE-SL2 DATUM / DATE : 2004-10-11 H Impedanzverlauf / impedance curve : 10000 Impedanz / impedance [Ohm] 1000 100 10 1 0,1 1 10 100 Frequenz / frequency [MHz] IF BW 10kHz START 1 MHz POWER 0 dBm Z (com) common mode Z (dif) differential mode = = = = = = = = = = Freigabe erteilt / general release: .......................................................................... Datum / date SWP 134,5 msec STOP 100 MHz Kunde / customer ............................................................................... Unterschrift / signature Würth Elektronik MST Version 5 04-10-11 MST Version 4 2004-03-29 AG Version 3 2003-04-15 MST Version 2 2003-03-04 Version 1 .......................................................................... ............................................................................... MST Geprüft / checked Kontrolliert / approved Name Änderung / modification 2002-04-17 Datum / date This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage. Würth Elektronik eiSos GmbH & Co. KG D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 2 VON 2