AC-DC 80-160 Watts xppower.com JPM Series • Low Cost • High Reliability • Power Factor Corrected • Suitable for Battery-charging Applications • Low Ripple & Noise • 125% Rating at 230 VAC • Optional Remote On/Off Specification Input General Input Voltage Input Frequency Input Current • 85-264 VAC (120-370 VDC) • 47-63 Hz • JPM80: 0.7 A max at 230 VAC JPM120: 1.1 A max at 230 VAC JPM160: 1.4 A max at 230 VAC Inrush Current • 40 A at 230 VAC cold start Power Factor • >0.9 Earth Leakage Current • <2 mA at 230 VAC Output Output Voltage Output Voltage Trim Initial Set Accuracy Start Up Delay Start Up Rise Time Hold Up Time Line Regulation Load Regulation Ripple & Noise Overvoltage Protection Overtemperature Protection Overload Protection Temperature Coefficient Remote On/Off • • • • • • • • • • • See tables +10%, -5% ±2% 600 ms max 30 ms max 25 ms min ±0.5% See tables See tables 110-135% Vnom, recycle input to reset Shuts down at +95 °C ±5 °C (measured internally) with auto recovery, only on JPM120 & JPM160 • 105-150% constant current, auto recovery • ±0.05%/°C • 4-10 VDC On, <0.8 VDC Off, optional. Add suffix ‘R’ to model number Efficiency Isolation MTBF • See tables • 3000 VAC Input to Output 1500 VAC Input to Ground 500 VAC Output to Ground • >183 kHrs per MIL-HDBK-217F (+25 °C) Environmental Operating Temperature • -10 °C to +60 °C, see derating curves Cooling • JPM80 & JPM120 convection-cooled, JPM160 includes internal fan Operating Humidity • 20-90% RH, non-condensing Storage Temperature • -20 °C to +85 °C Vibration • 2 g, 10-500 Hz, 10 min/cycle for 60 minutes each axis EMC & Safety Emissions Harmonic Currents Voltage Flicker ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Dips & Interruptions Safety Approvals • EN55022 (CISPR22), level B conducted EN55022 (CISPR22), level B radiated • EN61000-3-2 • EN61000-3-3 • EN61000-4-2, level 3 Perf Criteria A • EN61000-4-3, 3 V/m Perf Criteria A • EN61000-4-4, level 2 Perf Criteria A • EN61000-4-5, level 3 Perf Criteria A • EN61000-4-6, level 2 Perf Criteria A • EN61000-4-8, 3 A/m Perf Criteria A • EN61000-4-11, 30% 10 ms, 60% 100 ms, >95% 5000 ms, Perf Criteria A, B, B • EN60950-1-1:2001, UL60950-1, CSA22.2 No. 60950-1, CE Mark LVD Output Power(1,2) 53 W 80 W 80 W 80 W 80 W 80 W 80 W 80 W 80 W Output Voltage 3.3 V 5.0 V 7.5 V 12.0 V 13.5 V 15.0 V 24.0 V 27.0 V 48.0 V Output Current 16.0 A 16.0 A 10.7 A 6.8 A 6.0 A 5.3 A 3.4 A 3.0 A 1.7 A Ripple & Noise (pk-pk) 100 mV 100 mV 100 mV 100 mV 100 mV 100 mV 150 mV 150 mV 250 mV Load Regulation ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Model Number JPM80PS03† JPM80PS05† JPM80PS07† JPM80PS12† JPM80PS13† JPM80PS15† JPM80PS24† JPM80PS27† JPM80PS48† Efficiency 70% 76% 78% 80% 80% 82% 84% 83% 82% Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC - see derating curve below. 2. Mounting vertically increases max ambient temperature. See derating curve. 3. To attach the power supply to a DIN rail, order 2 x DIN CLIP. † Available from Farnell. See pages 204-206. Mechanical Details 7.05 (179.1) All dimensions in inches (mm) Weight: 1.3 lb (600 g) approx. 1.00 (25.4) 0.79 (20.1) 1.00 (25.4) 4.84 (122.9) 4.6 (116.8) 2.36 (60.0) 2.56 (65.0) 2 x M4 L=5mm R.C.± J2 LED +V ADJ. 2.01 (51.1) 3.11 (79.0) 3.90 (99.1) 7 6 0.37 (9.5) 5 J1 4 0.31 (8.0) 4.69 (119.1) 1.95 (49.5) 3 1.5 (38.1) 2 1 0.4 (10.2) 0.62 (16.0) 5 x M3 L=3mm Opt J2 4 x optional fixing lugs p/n JPMFL 5.59 (142.0) 1.00 (25.4) 0.59 (15.0) 1.00 (25.4) 0.43 (11.0) 0.6 (15.0) 1.77 (45.0) J1 Function Pin 1 AC Input 2 AC Input 3 Ground 4 DC Output -V 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 1 Remote Control + 2 Remote Control Molex type 22-23-2021 compatible 1.00 (25.4) Conn 0.50 (12.7) 4 x M4 L=6mm 12 V TO 48 V CONVECTION 3 V TO 7 V WITH 18 CFM 100 125 80 100 60 75 40 50 20 25 -10 0 10 20 30 3 V TO 7 V WITH CONVECTION AMBIENT TEMPERATURE ºC 40 50 55 55 LOAD % (180-264 VAC Input) LOAD % (85-180 VAC Input) Derating Curve 60 (HORIZONTAL) 70 (VERTICAL) AC-DC JPM80 Models and Ratings Output Power(1,2) 79 W 120 W 120 W 120 W 120 W 120 W 120 W 120 W 120 W Output Voltage 3.3 V 5.0 V 7.5 V 12.0 V 13.5 V 15.0 V 24.0 V 27.0 V 48.0 V Output Current 24.0 A 24.0 A 16.0 A 10.0 A 8.9 A 8.0 A 5.0 A 4.4 A 2.5 A Ripple & Noise (pk-pk) 100 mV 100 mV 100 mV 100 mV 100 mV 100 mV 150 mV 150 mV 250 mV Load Regulation ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Model Number JPM120PS03† JPM120PS05† JPM120PS07† JPM120PS12† JPM120PS13† JPM120PS15† JPM120PS24† JPM120PS27† JPM120PS48† Efficiency 67% 75% 79% 80% 80% 81% 83% 84% 84% Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC - see derating curve below. 2. Mounting vertically increases max ambient temperature. See derating curve. 3. To attach the power supply to a DIN rail, order 2 x DIN CLIP † Available from Farnell. See pages 204-206. Mechanical Details 7.83 (198.9) All dimensions in inches (mm) Weight: 1.54 lb (700 g) approx. 1.37 (34.8) 0.78 (19.8) 1.00 (25.4) 5.24 (133.1) 4.60 (116.8) 2.76 (70.0) 2.56 (65.0.) 2 x M4 L=5mm R.C.± J2 LED +V ADJ. 2.00 (50.8) 3.11 (79.0) 3.89 (98.8) 7 6 0.37 (9.5) 5 J1 4 0.31 (8.0) 4.69 (119.1) 1.95 (49.5) 3 1.5 (38.1) 2 1 0.40 (10.2) 0.62 (16.0) 5 x M3 L=3mm 0.43 (10.9) 0.60 (15.2) 5.59 (142.0) 1.0 (25.4) 0.59 (15.0) 4 x M4 L=6mm 1.00 (25.4) Opt J2 4 x optional fixing lugs p/n JPMFL 0.50 (12.7) Derating Curve High Line 125 Low Line 12 V TO 48 V CONVECTION 3 V TO 7 V WITH 18 CFM 100 75 3 V TO 7 V CONVECTION 50 25 -10 0 10 20 30 AMBIENT TEMPERATURE ºC 40 45 45 50 50 (HORIZONTAL) 55 (VERTICAL) 1.97 (50.0) J1 Function Pin 1 AC Input 2 AC Input 3 Ground 4 DC Output -V 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 1 Remote Control + 2 Remote Control Molex type 22-23-2021 compatible 1.00 (25.4) Conn LOAD % AC-DC JPM120 Models and Ratings Output Power(1,2) 105 W 160 W 160 W 160 W 160 W 160 W 160 W 160 W 160 W Output Voltage 3.3 V 5.0 V 7.5 V 12.0 V 13.5 V 15.0 V 24.0 V 27.0 V 48.0 V Output Current 32.0 A 32.0 A 21.0 A 13.4 A 11.8 A 10.6 A 6.7 A 6.0 A 3.3 A Ripple & Noise (pk-pk) 100 mV 100 mV 100 mV 100 mV 100 mV 100 mV 150 mV 150 mV 250 mV Load Regulation ±1.0% ±1.0% ±1.0% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% ±0.5% Model Number JPM160PS03† JPM160PS05† JPM160PS07† JPM160PS12† JPM160PS13† JPM160PS15† JPM160PS24† JPM160PS27† JPM160PS48† Efficiency 65% 71% 76% 79% 80% 81% 83% 83% 84% Notes 1. Max output increases to 125% of rated power when input voltage is between 180 VAC and 264 VAC and ambient temperature is less than +50 ˚C. 2. To attach the power supply to a DIN rail, order 2 x DIN CLIP. † Available from Farnell. See pages 204-206. Mechanical Details 7.83 (198.9) 0.78 (19.8) 1.00 (25.4) All dimensions in inches (mm) Weight: 1.76 lb (800 g) approx. 1.37 (34.8) 5.24 (133.1) 4.60 (116.8) 2.75 (69.9) 2.56 (65.0) 2 x M4 L=5mm R.C.± J2 LED +V ADJ. 2.00 (50.8) 3.11 (79.0) 3.89 (98.8) 7 6 0.37 (9.5) 5 J1 4 0.31 (8.0) 4.69 (119.1) 1.95 (49.5) 3 1.50 (38.1) 2 1 0.40 (10.2) 0.62 (16.0) 5 x M3 L=3mm 0.47 (11.9) 0.59 (15.0) 5.59 (142.0) 1.00 (25.4) 0.59 (15.0) 1.00 (25.4) Opt J2 4 x optional fixing lugs p/n JPMFL 1.97 (50.0) J1 Function Pin 1 AC Input 2 AC Input 3 Ground 4 DC Output -V 5 DC Output -V 6 DC Output +V 7 DC Output +V 9.5mm pitch M4 barrier strip 1 Remote Control + 2 Remote Control Molex type 22-23-2021 compatible 1.00 (25.4) Conn 0.50 (12.7) 4 x M4 L=6mm Derating Curve 80 100 60 75 40 50 20 25 LOAD % (85-180 VAC Input) 3 V TO 7 V WITH CONVECTION 125 -10 0 10 20 30 40 50 55 LOAD % (180-264 VAC Input) 12 V TO 48 V CONVECTION 3 V TO 7 V WITH 18 CFM 100 60 AMBIENT TEMPERATURE ºC 17-Apr-07 AC-DC JPM160 Models and Ratings