Card Connectors Series FPS SD Card and MMC Reader (Manual Insertion, Short Type) Specifications Insulation Resistance: 1,000MΩ min. at 500V DC Withstanding Voltage: 500V ACrms for 1 minute Contact Resistance: 100mΩ at 1mA / 20mV max. Voltage Rating: 250Vrms AC Current Rating: 0.5A Operating Temp. Range: –25°C to +85°C Coplanarity: < 0.1mm Mating Cycles: 10,000 (office environment) Part Number (Details) FPS 009 - 3202-BL Series No. Number of Contacts Design No. Materials and Finish Insulator: LCP glass filled Contacts: PB, t = 0.23 Contact area = Ni-Au Solder Tails = Ni-SnCu Write Protection: PB, t = 0.18 Ni-Au Card Detector: PB, t = 0.15, Ni-Au Features Connector for both card types (SD and MMC card) Short housing (20.3mm instead of 23.3mm) With card retention mechanism With card detector and write protection Easy operation by manual insertion / extraction 3 step sequential contacting design Tape and Reel packaging Outline Dimensions for FPS009-3202-BL See Detail A Card retention spring Section X - X A-4 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Series FPS SD Card and MMC Reader (Manual Insertion, Short Type) Recommended PCB Layout FPS009-3202-BL Card Connectors SD and MMC Top View Detail B Detail A (Function Options) Detail B (PCB Layout) Card detection Common terminal Write protection Circuit Diagram for Switch SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors A-5