ZCOMM V585ME05-LF

V585ME05-LF
PHASE NOISE (1 Hz BW, typical)
Rev A1
Voltage-Controlled Oscillator
Surface Mount Module
Applications
• Satellite Communications
• Test Instrumentation
•
£(f) (dBc/Hz)
9939 Via Pasar | San Diego, CA 92126
TEL: (858) 621-2700 | FAX: (858) 621-2722
URL: www.zcomm.com
EMAIL: [email protected]
Application Notes
• AN-101: Mounting and Grounding
• AN-102: Output Loading
• AN-107: Manual Soldering
OFFSET (Hz)
Performance Specifications
Min
Oscillation Frequency Range
1100
Typ
Max
Units
1900
MHz
Phase Noise @ 10 kHz offset (1 Hz BW)
-100
dBc/Hz
Harmonic Suppression (2nd)
-10
dBc
Tuning Voltage
0.8
20
MHz/V
78
Tuning Sensitivity (avg.)
11.5
dBm
100
pF
Pushing
5
MHz/V
Pulling (14 dB Return Loss, Any Phase)
10
MHz
85
°C
Max
Units
Power Output
6
Load Impedance
8.75
Vdc
50
Input Capacitance
Operating Temperature Range
-10
Package Style
Power Supply Requirements
MINI-14S
Min
Typ
Supply Voltage (Vcc, nom.)
10
Supply Current (Icc)
25
Vdc
30
mA
Additional Notes
LFSuffix = RoHS Compliant. All specifications are subject to change without notice.
© Z-Communications, Inc. All Rights Reserved.
Page 1 of 2
FRM-S-002 B
V585ME05-LF
Voltage-Controlled Oscillator
Surface Mount Module
Rev A1
Tuning Curve, typ.
FREQUENCY (MHz)
2240
2160
2080
2000
1920
1840
1760
1680
1600
1520
1440
1360
1280
1200
1120
1040
960
880
800
85 °C
25 °C
-10 °C
0
2
4
6
8
10
12
14
16
18
20
TUNING VOLTAGE (Vdc)
POWER OUTPUT (dBm)
Power Curve, typ.
Footprint
RECOMMENDED FOOTPRINT
SEVERAL HOLES OF O 0.015 ON
GND. PLANE ARE RECOMMENDED
FOR GOOD GROUNDING.
14
13
12
11
10
9
0.030 MIN. CUTBACK
FROM LIVE PADS
8
7
6
5
4
840
1120
1303
1458
1598
1733
1864
1987
2092
2171
2225
FREQUENCY (MHz)
85 °C
25 °C
-10 °C
Physical Dimensions
PIN CONFIGURATION
Z-COMM
XXXXXXXX-LF
W/O#
D/C
P1
P2
P3
REST
Vt
RF OUT
Vcc
GROUND
PACKAGE
H
MINI-14S
0.220
MINI-14S-LOW 0.160
MINI-14S-L
0.130
NOTE: ALL DIMENSIONS ARE IN INCHES
TOL: XXX: +/- 0.010
LFSuffix = RoHS Compliant. All specifications are subject to change without notice.
© Z-Communications, Inc. All Rights Reserved.
Page 2 of 2
FRM-S-002 B