V801ME01-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Data Collection • Spread Spectrum Communications • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2406 Typ Phase Noise @ 10 kHz offset (1 Hz BW) -94 Harmonic Suppression (2nd) -20 Tuning Voltage 0.5 Max Units 2646 MHz dBc/Hz -11 dBc 8 Vdc MHz/V 44 Tuning Sensitivity (avg.) 9 dBm Input Capacitance 50 pF Pushing 10 MHz/V Pulling (14 dB Return Loss, Any Phase) 9 MHz 85 °C Max Units Power Output 1 Load Impedance Operating Temperature Range 50 -35 Package Style Power Supply Requirements 5 MINI-14H Min Typ Supply Voltage (Vcc, nom.) 5 Supply Current (Icc) 17 Vdc 24 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V801ME01-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 Tuning Curve, typ. FREQUENCY (MHz) 2730 2680 2630 2580 85 °C 25 °C 2530 2480 -35 °C 2430 2380 2330 2280 0 1 2 3 4 5 6 7 8 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 3 0.030 MIN. CUTBACK FROM LIVE PADS 2 1 0 -1 -2 2315 2391 2447 2494 2538 2579 2620 2660 2699 FREQUENCY (MHz) 85 °C 25 °C -35 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B