V810ME14-LF PHASE NOISE (1 Hz BW, typical) Rev A1 Voltage-Controlled Oscillator Surface Mount Module Applications • Direct Broadcast • Satellite Up/Down Conversion • £(f) (dBc/Hz) 9939 Via Pasar | San Diego, CA 92126 TEL: (858) 621-2700 | FAX: (858) 621-2722 URL: www.zcomm.com EMAIL: [email protected] Application Notes • AN-101: Mounting and Grounding • AN-102: Output Loading • AN-107: Manual Soldering OFFSET (Hz) Performance Specifications Min Oscillation Frequency Range 2880 Typ Max Units 3340 MHz Phase Noise @ 10 kHz offset (1 Hz BW) -85 dBc/Hz Harmonic Suppression (2nd) -19 dBc Tuning Voltage 0.5 4 MHz/V 163 Tuning Sensitivity (avg.) 7 dBm Input Capacitance 50 pF Pushing 21 MHz/V Pulling (14 dB Return Loss, Any Phase) 10 MHz 85 °C Max Units Power Output 0 Load Impedance Operating Temperature Range 50 -40 Package Style Power Supply Requirements 3.5 Vdc MINI-14H Min Typ Supply Voltage (Vcc, nom.) 4.5 Supply Current (Icc) 21 Vdc 26 mA Additional Notes LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 1 of 2 FRM-S-002 B V810ME14-LF Voltage-Controlled Oscillator Surface Mount Module Rev A1 FREQUENCY (MHz) Tuning Curve, typ. 3460 3420 3380 3340 3300 3260 3220 3180 3140 3100 3060 3020 2980 2940 2900 2860 2820 2780 2740 2700 2660 85 °C 25 °C -40 °C 0 0.5 1 1.5 2 2.5 3 3.5 4 TUNING VOLTAGE (Vdc) POWER OUTPUT (dBm) Power Curve, typ. Footprint RECOMMENDED FOOTPRINT SEVERAL HOLES OF O 0.015 ON GND. PLANE ARE RECOMMENDED FOR GOOD GROUNDING. 8 7 6 5 4 0.030 MIN. CUTBACK FROM LIVE PADS 3 2 1 0 2716 2858 2944 3028 3111 3192 3269 3343 3412 FREQUENCY (MHz) 85 °C 25 °C -40 °C Physical Dimensions PIN CONFIGURATION Z-COMM XXXXXXXX-LF W/O# D/C P1 P2 P3 REST Vt RF OUT Vcc GROUND PACKAGE H MINI-14H 0.220 MINI-14H-LOW 0.160 MINI-14H-L 0.130 NOTE: ALL DIMENSIONS ARE IN INCHES TOL: XXX: +/- 0.010 LFSuffix = RoHS Compliant. All specifications are subject to change without notice. © Z-Communications, Inc. All Rights Reserved. Page 2 of 2 FRM-S-002 B