ZETEX ZXTC2063E6_08

A Product Line of
Diodes Incorporated
ZXTC2063E6
40V, SOT23-6, complementary medium power transistors
Summary
BVCEO > 40 (-40)V
BVECO > 6 (-3)V
IC(cont) = 3.5 (-3)A
VCE(sat) < 60 (-90)mV @ 1A
RCE(sat) = 38 (58)m⍀
PD = 1.1W
Description
C1
Advanced process capability has been used to achieve
this high performance device. Combining NPN and PNP
transistors in the SOT23-6 package provides a compact
solution for the intended applications.
B1
C2
B2
Features
E1
•
NPN - PNP combination
•
Very low saturation voltage
•
High gain
•
SOT23-6 package
Applications
•
MOSFET and IGBT gate driving
•
Motor drive
ZXTC2063E6TA
C1
E1
B1
B2
C2
E2
Top view
Ordering information
Device
E2
reel size
(inches)
Tape width
(mm)
Quantity
per reel
7
8
3000
Device marking
2063
Issue 2 - October 2008
© Diodes Incorporated 2008
1
www.zetex.com
www.diodes.com
ZXTC2063E6
Absolute maximum and thermal ratings
Parameter
Symbol
Limit
Unit
Collector-base voltage
VCBO
130(-45)
V
Collector-emitter voltage
VCEO
40(-40)
V
Emitter-collector voltage (reverse blocking)
VECO
6(-3)
V
Emitter-base voltage
VEBO
7(-7)
V
IC
3.5(-3)
A
ICM
9(-9)
A
IB
1(-1)
A
0.7
W
5.6
mW/°C
0.9
W
7.2
mW/°C
1.1
W
8.8
mW/°C
1.1
W
8.8
mW/°C
1.7
W
PD
13.6
mW/°C
Operating and storage temperature range
Tj, Tstg
-55 to +150
°C
Thermal resistance junction to ambient(a)(f)
R⍜JC
179
°C/W
Thermal resistance junction to ambient(b)(f)
R⍜JA
139
°C/W
Thermal resistance junction to ambient(b)(g)
R⍜JC
113
°C/W
Thermal resistance junction to ambient(c)(f)
R⍜JC
113
°C/W
Thermal resistance junction to ambient(d)(f)
R⍜JA
73
°C/W
Continuous collector current(c)(f)
Peak pulse current
Base current
Power dissipation @ Tamb = 25°C(a)(f)
Linear derating factor
PD
Power dissipation @ Tamb = 25°C(b)(f)
Linear derating factor
PD
Power dissipation @ Tamb = 25°C(b)(g)
Linear derating factor
PD
Power dissipation @ Tamb = 25°C(c)(f)
Linear derating factor
PD
Power dissipation @ Tamb = 25°C(d)(f)
Linear derating factor
NOTES:
(a) For a device surface mounted on 15mm x 15mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(b) For a device surface mounted on 25mm x 25mm x 1.6mm FR4 PCB with high coverage of single sided 1oz copper, in
still air conditions.
(c) For a device surface mounted on 50mm x 50mm x 1.6mm FR4 PCB with high coverage of single sided 2oz copper, in
still air conditions.
(d) As above measured at t<5 seconds.
(e) Repetitive rating - pulse width limited by maximum junction temperature. Refer to Transient Thermal Impedance
graph.
(f) For device with one active die, both collectors attached to a common sink.
(g) For device with two active dice running at equal power, split sink 50% to each collector.
Issue 2 - October 2008
© Diodes Incorporated 2008
2
www.zetex.com
www.diodes.com
ZXTC2063E6
Thermal characteristics
Issue 2 - October 2008
© Diodes Incorporated 2008
3
www.zetex.com
www.diodes.com
ZXTC2063E6
Electrical characteristics (at Tamb = 25°C unless otherwise stated)
Parameter
Symbol
Min.
Collector-base
breakdown voltage
BVCBO
Collector-emitter
breakdown voltage
(base open)
BVCEO
(-)40
Emitter-base
breakdown voltage
BVEBO
Emitter-collector
breakdown voltage
(reverse blocking)
Typ.
Max.
130(-45) 170(-80)
Unit Conditions
V
IC = (-)100␮A
63(-65)
V
IC = (-)10mA (*) *
(-)7
(-)8.3
V
IE = (-)100␮A
BVECX
(-)6
(-)7.4
V
IE = (-)100␮A, RBC < 1k⍀ or
0.25V > VBC > -0.25V
(0.25V < VBC < -0.25V)
Emitter-collector
breakdown voltage
(base open)
BVECO
6(-3)
7.4(-8.7)
V
IE = (-)100␮A
Collector-base cut-off
current
ICBO
Emitter-base cut-off
current
IEBO
Collector-emitter
saturation voltage
VCE(sat)
<1
(-)50
nA
VCB =100(-36)V
(-)20
␮A
VCB =100(-36)V, Tamb= 100°C
<1
(-)50
nA
VEB = (-)5.6V
50(-70)
60(-90)
85(-195) 110(-290)
mV IC = (-)1A, IB = (-)100mA *
mV IC = (-)1A, IB = (-)20mA *
150
220
(-175)
(-260)
mV (IC = -3A, IB = -300mA *)
135
195
mV IC = 3.5A, IB = 350mA *
Base-emitter saturation VBE(sat)
voltage
(-935)
(-1000)
mV (IC = -3A, IB = -300mA *)
960
1050
mV IC = 3.5A, IB = 350mA *
Base-emitter turn-on
voltage
VBE(on)
(-855)
860
(-950)
950
mV (IC = -3A, VCE = -2V *)
mV IC = 3.5A, VCE = 2V *
Static forward current
transfer ratio
hFE
( )450
( )900
( )300
mV IC = 2A, IB = 40mA *
IC = (-)10mA, VCE = (-)2V *
IC = (-)1A, VCE = (-)2V *
280(200) 400(280)
(20)
(50)
(IC = -3A, VCE = -2V *)
40
60
IC = 3.5A, VCE = 2V *
MHz IC = (-)50mA, VCE = (-)10V
f = 100MHz
Transition frequency
fT
190
(270)
Output capacitance
COBO
12(17)
Delay time
td
Rise time
20(25)
pF
VCB = (-)10V, f = 1MHz *
64(57)
ns
tr
108(69)
ns
VCC = (-)10V. IC = (-)1A, IB1
= IB2= (-)10mA.
Storage time
ts
428(154)
ns
Fall time
tf
130(60)
ns
NOTES:
(*) Measured under pulsed conditions. Pulse width ⱕ300␮s; duty cycle ⱕ2%
( ) = PNP
Issue 2 - October 2008
© Diodes Incorporated 2008
4
www.zetex.com
www.diodes.com
ZXTC2063E6
NPN Characteristics
Issue 2 - October 2008
© Diodes Incorporated 2008
5
www.zetex.com
www.diodes.com
ZXTC2063E6
PNP Characteristics
Issue 2 - October 2008
© Diodes Incorporated 2008
6
www.zetex.com
www.diodes.com
ZXTC2063E6
Package outline - SOT23-6
DIM
A
A1
A2
b
C
D
E
E1
L
e
e1
L
Millimeters
Min.
0.90
0.00
0.90
0.35
0.09
2.70
2.20
1.30
0.10
Inches
Max.
1.45
0.15
1.30
0.50
0.26
3.10
3.20
1.80
0.60
Min.
0.354
0.00
0.0354
0.0078
0.0035
0.1062
0.0866
0.0511
0.0039
0.95 REF
1.90 REF
0°
Max.
0.0570
0.0059
0.0511
0.0196
0.0102
0.1220
0.1181
0.0708
0.0236
0.0374 REF
0.0748 REF
30°
0°
30°
Note: Controlling dimensions are in millimeters. Approximate dimensions are provided in inches
Issue 2 - October 2008
© Diodes Incorporated 2008
7
www.zetex.com
www.diodes.com
ZXTC2063E6
Definitions
Product change
Diodes Incorporated reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or
service. Customers are solely responsible for obtaining the latest relevant information before placing orders.
Applications disclaimer
The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for
the user’s application and meets with the user’s requirements. No representation or warranty is given and no liability whatsoever is
assumed by Diodes Inc. with respect to the accuracy or use of such information, or infringement of patents or other intellectual property
rights arising from such use or otherwise. Diodes Inc. does not assume any legal responsibility or will not be held legally liable (whether
in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business,
contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances.
Life support
Diodes Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body
or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to
cause the failure of the life support device or to affect its safety or effectiveness.
Reproduction
The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the
company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a
representation relating to the products or services concerned.
Terms and Conditions
All products are sold subjects to Diodes Inc. terms and conditions of sale, and this disclaimer (save in the event of a conflict between the
two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement.
For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Diodes Zetex sales office.
Quality of product
Diodes Zetex Semconductors Limited is an ISO 9001 and TS16949 certified semiconductor manufacturer.
To ensure quality of service and products we strongly advise the purchase of parts directly from Diodes Inc. or one of our regionally
authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com or www.diodes.com
Diodes Inc. does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels.
ESD (Electrostatic discharge)
Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices.
The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent
of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time.
Devices suspected of being affected should be replaced.
Green compliance
Diodes Inc. is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory
requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use
of hazardous substances and/or emissions.
All Diodes Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance
with WEEE and ELV directives.
Product status key:
“Preview”
Future device intended for production at some point. Samples may be available
“Active”
Product status recommended for new designs
“Last time buy (LTB)”
Device will be discontinued and last time buy period and delivery is in effect
“Not recommended for new designs” Device is still in production to support existing designs and production
“Obsolete”
Production has been discontinued
Datasheet status key:
“Draft version”
This term denotes a very early datasheet version and contains highly provisional information, which
may change in any manner without notice.
“Provisional version”
This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance.
However, changes to the test conditions and specifications may occur, at any time and without notice.
“Issue”
This term denotes an issued datasheet containing finalized specifications. However, changes to
specifications may occur, at any time and without notice.
Sales offices
The Americas
Europe
Taiwan
Shanghai
Shenzhen
Korea
3050 E. Hillcrest Drive
Westlake Village,
CA 91362-3154
Tel: (+1) 805 446 4800
Fax: (+1) 805 446 4850
Kustermann-Park
Balanstraße 59,
D-81541 München
Germany
Tel: (+49) 894 549 490
Fax: (+49) 894 549 4949
7F, No. 50,
Min Chuan Road
Hsin-Tien
Taipei, Taiwan
Tel: (+886) 289 146 000
Fax: (+886) 289 146 639
Rm. 606, No.1158
Changning Road
Shanghai, China
Tel: (+86) 215 241 4882
Fax (+86) 215 241 4891
ANLIAN Plaza, #4018
Jintian Road
Futian CBD,
Shenzhen, China
Tel: (+86) 755 882 849 88
Fax: (+86) 755 882 849 99
6 Floor, Changhwa B/D,
1005-5 Yeongtong-dong,
Yeongtong-gu, Suwon-si,
Gyeonggi-do, Korea 443-813
Tel: (+82) 312 731 884
Fax: (+82) 312 731 885
Issue 2 - October 2008
© Diodes Incorporated 2008
8
www.zetex.com
www.diodes.com