AT-CUT LOW COST CERAMIC SMD CRYSTAL Pb RoHS Compliant ABM63CA FEATURES: • Industrial standard package 6.0x3.5, 2 pads • Ideal for Cost Sensitive Commercial Electronics • Suitable for High Volume Applications 6.0 x 3.5 x 1.2 mm | | | | | | | | | | | | | | | APPLICATIONS: • Laptop computers • Computer peripherals • Home network modem STANDARD SPECIFICATIONS: PARAMETERS ABRACON P/N: Frequency range: Operation Mode: Operating temperature: Storage temperature: Freq. Tolerance at +25° C: Freq. stability over operating temperature (Ref to +25° C): Equivalent series resistance: Shunt capacitance C0: Load capacitance CL: Drive Level: Aging @ 25°C per year: Insulation Resistance: TABLE 1 Frequency (MHz) 8.000 - 11.999 12.000 - 16.000 16.001 - 40.000 40.001 - 48.008 ABM63CA Series 8.0 MHz to 48 MHz AT-cut (Fundamental for <40MHz, 3rd OT for >40MHz) -10°C to + 60°C (see options) -40°C to +85°C ± 30ppm max. (Contact ABRACON for tighter tolerance) ± 50ppm max. (Contact ABRACON for tighter stability) See Table 1 7pF max 18pF (see option) 100uW max ±10ppm max 500Mohms min at 100Vdc ± 15V ESR (Ω Ω) 80 60 40 Contact ABRACON Test Condition Parts shall be tested under the condition of +20±15°C of the temperature, +65%±20%RH of the humidity unless the standard condition of +25±2°C of the temperature, +65%±5%RH of the humidity is specified. OPTIONS AND PART IDENTIFICATION: (Left blank if standard) Frequency XX.XXXX MHz ABM63CA - Frequency - Operating Temp. E 0°C ~ +70°C B -20°C ~ +70°C - - Packaging Blank Bulk T Tape & Reel Load Capacitance Please specify CL in pF (From 12 to 30) ABRACON IS ISO 9001 / QS 9000 CERTIFIED Please NOTE: This part is not recommended for high reliability applications such as automotive, medical, or safety related applications. Please contact ABRACON for information regarding our high reliability products and for application assistance. Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.02.07 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com AT-CUT LOW COST CERAMIC SMD CRYSTAL ABM63CA Pb RoHS Compliant 6.0 x 3.5 x 1.2 mm | | | | | | | | | | | | | | | OUTLINE DRAWING: Dimensions: inches (mm) TAPE & REEL: T = Tape and reel 1,000pcs/reel Dimensions: mm ABRACON IS ISO 9001 / QS 9000 CERTIFIED Please NOTE: This part is not recommended for high reliability applications such as automotive, medical, or safety related applications. Please contact ABRACON for information regarding our high reliability products and for application assistance. Visit www.abracon.com for Terms & Conditions of Sale Revised: 08.02.07 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com