LEADED, LOW FREQUENCY kHz BAND CERAMIC RESONATORS LXZT series Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) FEATURES: • Standard frequency range from190kHz to 1250kHz. • Low cost timing solution. • Low resonant impedance. RoHS Compliant Size varies | | | | | | | | | | | | | | | APPLICATIONS: • Microprocessor clocks. • Electrical appliances. • Remote controls. STANDARD SPECIFICATIONS: Item Requirement Oscillation Frequency Resonant Impedance Frequency Tolerance and stability Withstanding Voltage (V) Rating Voltage (1) D.C.Voltage (2) A.C. Voltage Load Capacitance Insulation Resistance Operating Temperature Storage Temperature Aging Rate (Fosc) 190.00kHz to 1250.00kHz See Table 2.1 See Table 2.1 50 (DC , 1 min) 6 V.D.C. max 15 Vp-p. max See Table 2.1 100M min. (10V DC 1min) -25oC to + 85oC o o -40 C to +85 C ±0.3% (From initial value) Table 2.1 Frequency Range (kHz) C1 (pF) ±20% C2 (pF) ±20% Resonant Impedance 190 - 249 250 - 374 375 - 429 430 - 509 510 - 699 700 - 999 1000 - 1250 330 220 120 100 100 100 100 470 470 470 100 100 100 100 20Ω max. 20Ω max. 20Ω max. 20Ω max. 30Ω max. 70Ω max. 100Ω max. Frequency Stability at -25°C to +85°C ± 0.3% ± 0.3% ± 0.3% ± 0.3% ± 0.3% ± 0.3% ± 0.3% Freq. Freq. Tolerance at 25°C ±1.0 kHz ±1.0 kHz ±2.0 kHz ±2.0 kHz ±2.0 kHz ± 0.5% ± 0.5% TEST CIRCUIT: IC 1/6TC4069UBP×2 X CERAMIC RESONATOR C1,C2: Load Capacitance OPTIONS & PART IDENTIFICATION: LXZT - Frequency Frequency (kHz) ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.29.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com LEADED, LOW FREQUENCY kHz BAND CERAMIC RESONATORS LXZT series Pb in ceramic (exempt per RoHS 2002/95/EC Annex (7)) RoHS Compliant Size varies | | | | | | | | | | | | | | | OUTLINE DIMENSIONS Freq. Dimension : Inches (mm) Frequency Range 190-249 kHz 250-374 kHz 375-429 kHz 430-699 kHz 700-1250 kHz L 0.53 (13.5) 0.43 (11.0) 0.31 (7.9) 0.28 (7.0) 0.20 (5.1) W 0.14 (3.6) 0.14 (3.6) 0.14 (3.6) 0.14 (3.5) 0.09 (2.2) H 0.58 (14.7) 0.48 (12.2) 0.37 (9.3) 0.35 (9.0) 0.25 (6.3) LL WW 0.32 (8.0) 0.39 (10.0) 0.28 (7.0) 0.30 (7.7) 0.24 (6.0) 0.20 (5.0) 0.16 (4.0)/0.24 (6.0) 0.20 (5.0) 0.16 (4.0) 0.10 (2.5) CAUTION • Do not apply excess mechanical stress to the component body or terminations. Do not attempt to re-form or bend the components as this will cause damage to the component. • This component is not hermetically sealed. Do not clean or wash the component. • Reflow Soldering: Do not use strong acidity flux，such as flux with chlorine content of greater than 0.2wt% during Reflow Soldering. • Do not expose the component to open flame. • This specification applies to the functionality of the component as a single unit. The customer is advised to insure that the component is thoroughly evaluated in the application circuit. • Shelf Life: The warranted Shelf Life of this product is Six Months after the Delivery Date under the conditions of sealed, unopened, original packaging. • Storage Conditions: If the product is to be stored for a period greater than Six Months after the Delivery Date, it is recommended that the customer confirm the solderability and characteristics for the product prior to use. • This product is not recommended for use in industrial related Automotive, Medical, Safety, Military, or other high-reliability life dependant applications. Contact Abracon Corporation prior to using this product when in doubt. ABRACON IS ISO 9001 / QS 9000 CERTIFIED Visit www.abracon.com for Terms & Conditions of Sale Revised: 09.29.08 30332 Esperanza, Rancho Santa Margarita, California 92688 tel 949-546-8000 | fax 949-546-8001 | www.abracon.com