A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Top View LEDs With Bi-Color Part Number: 67-22SURSYGC Package outlines & Re-flow Profile Reflow Temp/Time Soldering iron Basic spec is U 5sec when 260℃. If temperature is higher, time should be shorter (+10℃Æ -1sec ).Power dissipation of iron should be smaller than 15W, and temperatures should be controllable .Surface temperature of the device should be under 230℃ . ITEM MATERIALS Resin (mold) Epoxy Lens color Water Clear Printed circuit board BT Material SUR AlGaInP Hyper Red Emitted color SYG AlGaInP Super Yellow Green & For Reflow Soldering NOTES: 1. All dimensions are in millimeters (inches). 2. Tolerances are ±0.1mm (0.004inch) unless otherwise noted. 3. Polarity referring onto the cathode mark is reversed on the red. 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC ELECTRO-OPTICAL CHARACTERISTICS Parameter Value Test Emitted Symbol MIN. TYP. MAX. Color Condition SUR Forward voltage SYG SUR Luminous intensity SYG SUR SYG Wavelength (TA=25℃) SUR SYG Spectral Line Half-Width SUR SYG Peak pulsing current (1/10 duty f=1kHz) SUR SYG IF=20mA VF IF=20mA IV IF=20mA λp IF=20mA λd IF=20mA △λ SUR SYG Electrostatic Discharge SUR SYG 2.4 − 2.0 2.4 24 60 − 16 25 − − 630 − − 575 − − 625 − − 575 − − 20 − − 20 − VR=5V mcd nm nm mA 60 mW 60 IR 10 µA ESD 2000 mA Absolute maximum ratings Parameter V 160 160 PD SYG Reverse current 2.0 IFP SUR Power Dissipation − Unit (TA=25℃) Symbol Value Unit 2θ1/2 130 Deg Forward current IF 20 mA Reverse voltage VR 5 V Operating temperature range Top -40 ~+85 ℃ Storage temperature range Tstg -40 ~+90 ℃ Viewing angle at 50% IV 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Test items and results of reliability Test Sample Size Ac/Re Hours/Cycle NO Item Test Conditions 1 Reflow TEMP：240±5℃ Min. 5sec. 6 MIN. 22 PCS 0/1 2 Temperature Cycle H：+100℃ 15min ∫ 5min L：-40℃ 15min 300 CYCLES 22 PCS 0/1 3 Thermal Shock H：+100℃ 5min ∫ 10set L：-10℃ 5min 300 CYCLES 22 PCS 0/1 4 High Temperature Storage TEMP：100℃ 1000 HRS 22 PCS 0/1 5 Low Temperature Storage TEMP：-55℃ 1000 HRS 22 PCS 0/1 6 DC Operating Life IF=20mA 1000 HRS 22 PCS 0/1 7 High Temperature / High Humidity 85℃ / 85%RH 1000 HRS 22 PCS 0/1 ＊Refer to reliability test standard specification for in this line. 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2006/10/12 A-BRIGHT A-BRIGHT INDUSTRIAL CO., LTD. SURFACE MOUNT CHIP LED LAMPS Part Number: 67-22SURSYGC Typical Electro-Optical Characteristics 2006/10/12