ACT ACT711S

Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
info@actcrystals.com
ACT711S
The ACT711S is an ultra thin, plastic moulded package with a maximum height of 1.4 mm. The package
contains a highly reliable cylinder type quartz crystal and is ideally suitable for automatic insertion,
especially where PCB component mounting space is at a premium.
Applications include Wireless Communications Equipment, Pagers, PDAs, Cellular Phones, Portable
applications, and a variety of clock sources.
Specification
Parameter
Frequency Range
Frequency Tolerance
Frequency v Temperature @25°C
Turnover Temperature
Temp. Coefficient
Temp Operating Range
Temp Storage Range
Equivalent Series Resistance
Shunt Capacitance
Load Capacitance
Drive Level
Aging
Reflow Profile
0.3
Symbol
Specification
fo
Δf/fo
TC
Tp
K
Topr
Tstg
ESR
C0
CL
DL max
Fa
Tsol
32.768KHz
±20ppm / ±50ppm
See Drawing
+25°C ±5°C
(-3.5±1.0) x 10-8/°C²
-40 ~+85°C
-55 ~ +125°C
65KΩ max
0.8pF typical
7.0pF / 12.5pF
1.0μW ( 0.1μW Recommended )
±3ppm max 25°C ±3°C, First Year
260°C max x 5 secs x 2 times (max IR reflow)
7.0 max
6.7
0.6
#3
1.5 max
0.55
#1
#2
0.3
0.4
0.2
0.4
0.2
#1
#2
#4
#3
1.2
5.1
1.2
Suggested Footprint
Dimensions in mm
1.4 max
Temperature °C
-20 -10
0 +10 +20 +30 +40 +50 +60
0
-10
Pad Plating Material SnBi
-20
-30
-40
-50
-60
Δ f/f (ppm)
Typical Temperature Characteristics
Please note that all parameters can not necessarily be specified in the same device
Customer to specify : Frequency Tolerance, Load Capacitance
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
1 of 4
Issue: 6 A3
Date: 14/09/05
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
info@actcrystals.com
ACT711S TAPE & REELING SPECIFICATION
Standard Reel Quantity 3.000
MATERIAL
Tape
Reel
A_PET
Cardboard
ORIENTATION IN CARRIER TAPE
LAYOUT OF TAPE
No Components
20 Pockets Minimum
Cover Tape Leader
150mm Minimum
Start of carrier tape bent vertically and hooked into reel slot.
COVER TAPE OVERLAP
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
2 of 4
Issue: 6 A3
Date: 14/09/05
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
info@actcrystals.com
ACT711S TAPE & REELING SPECIFICATION cont'd
PEEL STRENGTH
Using method below the force to start the tape peeling with a pull speed of 300±10 mm/min shall be
0.1~1.3N.
REEL DIMENSIONS (mm)
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
3 of 4
Issue: 6 A3
Date: 14/09/05
Tel :
Fax :
email :
0044 (0)118 979 1238
0044 (0)118 979 1283
info@actcrystals.com
ACT711S TAPE & REELING SPECIFICATION cont'd
CARRIER TAPE DIMENSIONS (mm)
ACT711S REFLOW SOLDERING PROFILE
Temperatures are PCB temperatures.
In line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice
ISO9001:2000 Registered
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berkshire, RG41 2EY, UK
http://www.actcrystals.com
4 of 4
Issue: 6 A3
Date: 14/09/05